User manual ONKYO DX-7222

[. . . ] Contents Before using Compact Disc Player DX-7222 Instruction Manual Important Safeguards. . . . . . . . . . . . . . . . . . . . . . . . 2 Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Supplied accessories. . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Remove the cap for the terminal you wish to use when connecting the DX-7222 to digital equipment. Replace the caps if you are not using the DIGITAL OUTPUT terminals. ANALOG OUTPUT DIGITAL OUTPUT OPTICAL 1 DIGITAL OUTPUT OPTICAL 2 REMOTE CONTROL COMPACT DISC PLAYER L MODEL NO. DX-7222 RATING: WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN AVIS RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR R 220-230V 120V VOLTAGE SELECTOR 3 Audio connection cable Connecting an Onkyo product with connectors enables you to use the System function. 4 cable To AC outlet 1 L R 2 (REC) jack Optical fiber cable (not included) 2 DIGITAL IN MD player, DAT, etc. with digital inputs DIGITAL IN Amplifier, Tuner amplifier with digital inputs Amplifier without digital inputs A Connection with the amplifier Connect the DX-7222 to the CD jacks of your amplifier. B Connection via the digital output terminal (DIGITAL OUTPUT) Connection to digital equipment, such as an MD recorder or DAT. Use an optical cable to connect this unit to the digital input terminal of an MD recorder or DAT in order to make digital recordings. The optical cable should have connectors which fit into the digital terminals. C Connections for remote control When the DX-7222 is connected to an amplifier with the Onkyo jack, pressing the CD operation button on the amplifier's remote controller enables you to operate the CD player. Note: · The upper and lower remote control jacks have the same function. · Remote control operation is not possible when only the remote control cable is connected ­ the audio cables must also be connected. · An cable equipped with a 1/8" (3. 5mm) diameter miniature two-conductor phone plug is included with the DX7222 and with every tuner, compact disc player or cassette tape deck with the symbol. ONKYO D Connecting the AC power cord and turning the power on 1. Insert the AC power cord into a wall outlet. Note: To insert the AC power cord into an AC outlet on the rear panel of another component, use the UNSWITCHED outlet. 6 Playing CDs POWER Disc tray PAUSE STOP PLAY 1 DISPLAY , 2 3 REPEAT , 4 5 6 MEMORY 7 DX-7222 8 9 NEXT SELECTION CLEAR +10 0 TIME EDIT PEAK SEARCH A B SHUFFLE OPEN/CLOSE REMOTE CONTROLLER RC-402C 1 2 Remote controller Normal play 1. Press the POWER button to turn on the power. Put the disc in the disc tray, with the label side of the disc facing up. The CD player will play the first track (track 1). * If you want to, you can skip step 4 by pressing the PLAY button instead of the OPEN/CLOSE button. The disc tray will close automatically and play track 1. If the CD player does not start playing when the PLAY button is pressed: · The disc may be upside down in the tray. Press the OPEN/ CLOSE button to open the disc tray. If you cannot read the label on the disc, turn the disc over. · Moisture may have formed inside the CD player. [. . . ] playing irregularly shaped discs may damage the internal mechanism of the unit. Do not use discs on which adhesive from adhesive tape or a disc label (if it is a rental disc) remains. Otherwise, you may not be able to eject the discs or the unit may become inoperative. 15 Troubleshooting Guide · No power. Cause: Power cable is not properly plugged into the AC outlet. Remedy: Insert the power plug firmly. Specifications Signal readout system: Reading rotation: (constant linear velocity) Linear velocity: Error correction system: D/A converter: Sampling frequency: Number of channels: Frequency response: Total harmonic distortion: Dynamic range: Signal to noise ratio: Channel separation: Wow and Flutter: Output level: Power consumption: Power supply: Dimensions (W × H × D): Weight: Optical non-contact About 500 - 200 r. p. m. [. . . ]