User manual ONKYO DX-7500

[. . . ] 3 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Control positions and names . . . . . . . . . . . . . . . . . . . . . . . 5 Supplied accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Remote controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] · On each pair of input or output jacks, the jack marked R corresponds to the right channel and the jack marked L corresponds to the left channel. WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN AVIS RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR COMPACT DISC PLAYER MODEL NO. DX-7500 OUTPUT REMOTE CONTROL DIGITAL OUTPUT OPTICAL L R Audio connection cable cable L CD To wall outlet Optical fiber cable (not included) R Optical IN Amplifier DAT, MD recorder or Digital amplifier Connecting to an audio system Two types of output jacks are located on the rear panel. Use the DIGITAL OUTPUT jack if you are connecting the unit to audio equipment that supports a digital connection. OUTPUT (analog) jacks: These are the most commonly used jacks. Connect these jacks to the amplifier's CD input jacks using the supplied audio connection cable. DIGITAL OUTPUT (optical) jack: For digital recording, connect this jack to the digital input jack of a Mini Disc recorder, a DAT deck, or other digital equipment. If your amplifier has a digital input jack, connecting the DIGITAL OUTPUT jack to it will produce a much clearer and more dynamic sound. Connections for remote controller ( ) · Terminal protection cap is attached to the digital jack. Remove the cap when connecting the unit to other digital equipment. When you are not using the digital output jack, replace the cap. Refer to the amplifier's instruction manual for connections. · When connecting Onkyo products, it is necessary to attach the cable to be able to use the remote controller of the main component to control the entire system. To use this CD changer with an amplifier (or receiver), cassette jack, contape deck, and tuner that include the appropriate cable, plugged into the REnect the components using the MOTE CONTROL jacks. As the exact connection sequence of the cable is unimportant, you can connect from the amplifier (or receiver) to either the tuner, cassette tape deck, or compact disc changer. The carousel will turn so that you can change a disc other than the one that is playing. Press the OPEN/CLOSE button to close the loading drawer. Note: You cannot select a new disc to play if the loading drawer is open. When you finish changing discs, close the loading drawer immediately. 1 Important notes on handling CDs 1. Carefully lift the disc from the disc case, making sure to hold the disc by its edges or the hole in the center. You may use a dry, soft cloth to wipe dust and fingerprints from the surface of CDs. Do not use volatile agents on discs, such as thinner or benzine. Also, do not use conventional record cleaner or antistatic agents. 2 · Do not place a CD in direct sunlight or locations subject to · Do not store a CD in the CD changer tray for a long period high humidity or low temperature. of time. 8 Playing CDs DISPLAY PAUSE STOP / / Stopping playback temporarily PAUSE Press the PAUSE button. To resume playback, press PLAY button, or press the PAUSE button again. the The CD changer starts playing again from exactly the point at which it stopped. Stopping playback STOP Press the STOP button. [. . . ] Track number MEMORY indicator Program number Disc Number Total number of stored programs e Clearing the last track stored MEMORY CLEAR CLEAR Press the CLEAR button. The last track stored in memory is cleared. REMOTE CONTROLLER RC-331C Clearing the entire program MEMORY MEMORY CLEAR REMOTE CONTROLLER RC-331C Press the MEMORY button to turn off the MEMORY indicator. The contents of memory are completely cleared. Checking what is stored in memory / / MEMORY TRACK DISC No. 123 456 REMOTE CONTROLLER RC-331C 1. First, if the CD changer is playing in memory playback mode, press the STOP button. [. . . ]