User manual ONKYO DX-C206

[. . . ] There are only three wires to connect and four simple plug-in cables. Just follow the simple step-by-step instructions that follow. FEATURES n n n n n Remote mount changer holds up to 10 compact discs Remote control with backlit LCD panel, displays disc number, track number and function Remote controls include forward and reverse track and disc search, track and disc scan, shuffle and repeat play plus high speed audible cue and review search Advanced technology includes 8x oversampling digital filter and twin 1-bit digital/analog converters The special design allows horizontal, vertical or 45-degree mounting. TOLL-FREE ASSISTANCE The installation and connections are so simple we doubt you'll need our help, but if you do, we're here to help you. Just call our toll-free assistance line at 1-800-645-4994 during the days/hours shown. TIME ZONE CENTRAL MOUNTAIN 6:30AM - 5PM 7AM - 3PM 7:30AM - 6PM 8AM - 4PM DAY MON. [. . . ] Tune to 89. 1 on the FM band unless you set the selection switch on the FM module to 88. 7; then tune to 88. 7 on the FM band. bm bo. bn 11 bp 14 13 12 NOTE: You may find that it will be easier to use one of your presets specifically for CD operation. FM 89. 1 on the remote control 4. Press the Reset button using a pencil tip or other thin pointed instrument. NOTE: This is only required the First Time you use the Changer. bq 17 15 5. Turn on the CD changer by pressing the Play/Pause button The LCD panel will illuminate and disc number 1 will begin play. Adjust your car radio's volume, balance and tone controls for desired sound. When the last track on disc 1 has played, the unit will automatically advance to the next disc in sequence and begin playing. This will continue until all discs have been played at which time the unit will begin playing disc number 1 again. br. bs INTRO SCAN REPEAT SHUFFLE SHFL OFF 16 13 1 LCD DISPLAY USE OF CONTROLS The LCD Display Panel will illuminate when the CD changer is operating. Different symbols will appear depending on the function and operation in use. Each functional display is explained in the following paragraphs. 2 TRACK/DISC SCAN (SCN) When the Scan button is pressed, the indication SCN will appear on the LCD panel and the first 10 seconds of each track on the disc will be played in order. When a desired track is reached, press the Scan button again and play of that track will continue (SCN will disappear from the display). Scan mode will be cancelled by activating any other function (Repeat, Shuffle, Disc Select, Track Select, or Track Search). During search operation, the rotation disc symbol will turn faster and the appropriate symbol or will flash on the LCD panel. When the forward search button is held down and end of the last track is reached, or the backward search is held down and the unit reaches the beginning of the first track on the disc, the unit will enter the Pause mode until the button is released. 5 RESET BUTTON A reset button is located on the front panel of the remote control which must be activated with a pen or other thin object as it is recessed to prevent accidental engagement. The reset circuitry Press the DISC select button to select the desired disc for play as shown on the LCD panel. The unit will automatically load the selected disc and begin play. To advance to a higher number disc, press the + side of the button. To return to a lower number, press the - side. bl DISC +/- SELECT BUTTON 14 CAUTION: When the CD magazine is ejected by the use of the Reset button, whichever disc was in play prior to pressing Reset will be left in the play position in the changer. It is critical that before reinserting the CD magazine, you must REMOVE ALL DISCS from it. After you have inserted the empty CD magazine, press EJECT on the changer and the "in play" disc will be loaded into the empty magazine. You may then remove the magazine and reload as many discs as desired. WARNING: Avoid use of Reset button after initial use unless you have a definite abnormal disc operation. Use the EJECT button on the changer to remove the CD magazine for normal operation. HINTS FOR CORRECT AND SAFE OPERATION This CD Changer is designed to be operated only on 12 volt DC negative ground systems. [. . . ] 5 MANUAL MAGAZINE RELEASE (BOTTOM LEFT CORNER) Fig. 6 EJECT BUTTON 16 CD CHANGER OPERATING INSTRUCTIONS This CD Changer is designed to operate through a compatible Audiovox car stereo which incorporates the controls and display functions or through the FM section of any car stereo. Please check with your Audiovox stereo specialist for recommendations of the models that will work with this changer. The specific operating instructions for the changer will be contained within the Owner's Manual of the compatible unit. SPECIFICATIONS: Changer: Frequency Response: Distortion: Dynamic Range: Signal-to-Noise Ratio: Channel Separation: Wow & Flutter: Dimensions: Operating Voltage: Current Drain: FM Modulator: Output Frequency: Accessories Supplied: 88. 7/89. 1 MHz (Switchable) 10-disc magazine, P/N 10CD56M Mounting hardware (1set) Connecting cable (1ea. ) 5 - 20, 000 Hz ±1dB 0. 008% @ 1kHz 95 dB 95 dB 70 dB @ 1kHz below measurable limits 9-5/8" W x 3-3/8" H x 6-7/8" D 245 mm x 85 mm x 174 mm 12 Volts DC, negative ground 800mA (Playback/loading/ejecting) 17 TROUBLESHOOTING An error made in operation or during installation of this product may be mistaken for a system malfunction. [. . . ]