User manual ONKYO DX-C380

[. . . ] DX-C380 Compact Disc Changer Instruction Manual NEXT SELECTION OPEN/CLOSE PAUSE STOP PLAY POWER DISPLAY RANDOM REPEAT / / MEMORY CLEAR ON OFF DISC SKIP DISC 1 DISC 2 DISC 3 DISC 4 DISC 5 DISC 6 6 DISC FIVE CD EXCHANGE CONTINUOUS PLAY COMPACT DISC CHANGER DX-C380 Thank you for purchasing the Onkyo Compact Disc Changer. Please read this manual thoroughly before making connections and plugging in the unit. Following the instructions in this manual will enable you to obtain optimum performance and listening enjoyment from your new Compact Disc Changer. Please retain this manual for future reference. CONTENTS Important Safeguards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] As the exact connection sequence of the cable is unimportant, you can connect from the amplifier (or receiver) to either the tuner, cassette tape deck, or compact disc changer. To operate correctly, the remote controller must point toward the remote control sensor of the amplifier (or receiver). NOTES: · The upper and lower REMOTE CONTROL jacks have the same function. · Remote controller operation is not possible when only the cable is connected ­ the audio connection cables must also be connected. · An cable equipped with a 3. 5mm (1/8 in. ) diameter miniature two-conductor phone plug is included with this unit and with jack. every tuner and cassette tape deck that utilizes the 1 NEXT SELECTION 2 POWER OPEN/CLOSE PAUSE STOP PLAY POWER DISPLAY MEMORY CLEAR ON OFF Connecting the power Before plugging in the unit, confirm that all connections have been made properly. Insert the AC power supply cord into the outlet. Press the POWER button. DISC SKIP DISC 1 DISC 2 DISC 3 DISC 4 DISC 5 DISC 6 6 DISC FIVE CD EXCHANGE CONTINUOUS PLAY To AC outlet COMPACT DISC CHANGER DX-C540 ON OFF · When the power first turns on, the carousel rotates to find a disc and stops automatically if there is a disc on the disc tray. 7 Playing CDs 1, 3 2 4 1 OPEN/CLOSE Normal playback 1. Press the OPEN/CLOSE button to open the loading drawer. Place the disc(s) in the disc trays with the label(s) facing up. · Pressing the DISC SKIP button rotates the carousel so that you can load disc(s) in other disc trays. · The disc tray with the Disc Number marked by a circle on the indicator will come to the front. · The carousel usually rotates counter-clockwise. However, it may sometimes rotate clockwise when you press the DISC SKIP button four times repeatedly. · If you place the discs in the disc trays and press the PLAY button instead of the OPEN/CLOSE button, the drawer will close, the carousel will rotate, and the unit will start playing back the disc in the front disc tray. Press the OPEN/CLOSE button again to close the loading drawer. When you close the loading drawer, the unit will read the disc in the front disc tray and display the number of tracks and the recording time in the disc. If there is no disc in this tray, the carousel rotates until it finds a disc tray with a disc. Disc Numbers with empty trays disappear from the display. The unit will start playing back the disc from the first track. After the CD changer completes playing back all discs on the carousel, the display returns to the view shown in step 3. Front disc tray 2 DISC SKIP 3 OPEN/CLOSE DISC No. TRACK TOTAL REMAIN 123 4 Changing a disc during playback 4 PLAY PAUSE TRACK SINGLE ELAPSED DISC No. 123 4 1. [. . . ] The CD changer will display the last program number stored in memory. If you press and hold down the / button, the track numbers in memory will appear in the display in the order in which they were stored. If you press and hold / button, the track down the numbers will appear in the opposite order. Notes about the time display In the following cases, the time display may indicate "­ ­ : ­ ­" due to the memory limitations. · If you switch to the remaining time display while the CD changer is playing the 21st or later song on the disc · If you switch to the total remaining time display after storing the 21st or later song on the disc · If you switch to the total remaining time display after the CD changer plays songs from memory for more than 99 minutes 59 seconds, or · If you switch to the total remaining time display during random playback of a CD that contains 21 or more songs. 15 Troubleshooting Guide Specifications · No power. Cause: Power cable is not properly plugged into the AC outlet. [. . . ]