User manual ONKYO DX-F5

[. . . ] 13 Index Search . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Track Programming for Recording to Tape . . . . . . . . . . . . . . . . . . 19 Notes about the Remote Control Transmitter . . . . . . . . . . . . . . . . . 20 Notes about Handling Compact Discs . . . . . . . . . . . . . . . . . . . . . . . [. . . ] To close the door To open the door 11 RANDOM-SEQUENCE PLAY You can have the unit play the tracks on a disc in a random sequence selected by the unit's microcomputer. To perform random-sequence play Notes · This feature will not function during programming, or during programmed play. · RANDOM If the POWER is switched off when the random-sequence play mode is functioning, when the POWER is switched on again, the unit will begin the random-sequence play automatically. (This feature is available for timer play. ) If the SKIP button is pressed during random-sequence play, the next randomly programmed track will be played. If the SKIP button is pressed, play will return to the beginning of the track now being played. This indication appears while the unit is mixing up tracks. Total remaining time on the disc will not be displayed during random-sequence play. · To cancel random-sequence play RANDOM STOP · · or REPEAT PLAY You can play any desired track or the entire disc repeatedly by pressing the REPEAT button. The repeat play mode will change whenever you press the REPEAT button. (OFF) S/F REPEAT SINGLE REPEAT SINGLE (S) REPEAT A single track is repeatedly played. * This is also available in the programmed-play mode and the random-sequence play mode. (If the repeat play mode is switched off, the programmedplay mode or the random-sequence play mode will be resumed. FULL (F) REPEAT All tracks (the entire disc) are played repeatedly. * In the programmed-play mode, all programmed tracks are repeatedly played. * In the random-sequence play mode, all randomly sequenced tracks are repeatedly played in the same order. FULL REPEAT 12 PROGRAM PLAY You can enjoy listening to your favorite tracks in any desired order using programmed play. Notes · Not all discs have index numbers. The index system is a method for sub-dividing tracks into smaller divisions (such as, for example, the movements within classical symphonies) for easier location of those parts. The liner notes with the disc usually tell if such index numbers are included. · If an index number is selected that is higher than any index number on that disc, play will start from the last index number point on the disc. · For some discs, play may begin slightly prior to the actual designated index point. · If the disc has no encoded index points, play will begin from the start of the selected track. · The index number can be designated only while the INDEX number display is illuminated. 2 INDEX 3 Select the desired index number. 3 14 TRACK PROGRAMMING FOR RECORDING TO TAPE This convenient feature can be used to program tracks on a disc for recording to tape. By only memorizing the tape's total possible recording time, the unit will automatically program tracks or help you to program tracks so they will fit onto the tape with the least amount of unrecorded space remaining at each end of the tape. Automatic tape-programming This is for recording only the tracks which best fit onto a tape. OPEN/CLOSE DIMMER TIME 3 2 7 PROG TAPE CLEAR PEAK SPACE S/F REPEAT RANDOM 1 2 3 +10 4 5 6 7 8 9 0 SKIP PAUSE PLAY SEARCH INDEX STOP ­ OUTPUT LEVEL + SYNCHRO 5 4 6, 7 1 S/F REPEAT 1 Stop the unit. STOP 5 * The peak level searching function of this unit is useful for adjusting recording level on the tape deck. (Refer to page 18. ) * By pressing the REPEAT button, the unit automatically programs tracks for side A and side B separately considering the tape's total time. 2 If desired, you can automatically insert 10. ) time additional space between tracks. (Refer to page SPACE 6 Begin recording on the tapethe same time. the deck and press PLAY button on this unit at 7 The unit will pause to sideendResumeArecording and, at at the of side of the tape. [. . . ] 2 Hz Harmonic distortion + noise 20 kHz, 20 kHz, 0. 3 dB 0. 5 dB GENERAL Power requirements U. S. A. and Canada models . . . . . . . . . . . . . . . . . . . . . . . . . . . 240V, 50 Hz Europe model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 230V, 50 Hz General model . . . . . . . . . . . . . . . . . . . . . 110/120/220/240V, 50/60 Hz Power consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]