User manual ONKYO DX-G10

[. . . ] Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Only use attachments/accessories specified by the manufacturer. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. [. . . ] ·Remove the batteries from the remote control if it will not be used for a long time. ·Dispose of batteries in accordance with local regulations on battery disposal. NOTE The unit may function improperly or the remote control may not operate if the remote control sensor is exposed to direct sunlight or strong artificial light from a fluorescent or infrared light. Cleaning discs ·If there are fingerprints or dirt on a disc, wipe them off before using the disc. Fingerprints and dirt can impair sound quality and cause interruptions in playback. ·Use a commercially available disc cleaning set or a soft cloth to clean discs. Advanced operations Explanation of terms Troubleshooting Gently wipe the disc from the inside towards the outside. Do not wipe in a circular motion. Specifications NOTE Do not use record spray, antistatic agents, benzene, thinner or other solvents. Index 4 ENGLISH Part names and functions For buttons not explained here, see the page indicated in parentheses ( ). Front panel qw e rt y u i o Q0 Display q w e r t y u i o Q0 Q1 Q2 Q5 Q4 Q6 q Power operation switch (ON/STANDBY) ············································ (8) Q3 Q5 Q4 Q3 Q2 Q1 q 1 (repeat) indicator This indicator lights up during repeat play of one track. Q1 Headphone volume control knob (LEVEL) ····································································· (10) Q1 REMAIN (remaining time) indicator This indicator lights up above the remaining playback time of a track, when it is displayed. w Power indicator (STANDBY) ······················· (8) The light indicates the CD player operating status as follows: ·Power "ON" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Turn off ·Standby . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Red e Disc tray open/close button (5)·················· (9) r Fast forwarding/Forward-skip button (7, 9) ····················································· (9) Q2 Headphones jack (PHONES) ······················ (10) Q3 Remote control sensor ································ (4) Q4 DISPLAY OFF indicator ······························ (10) Q5 DISC/INPUT button ······································ (9) Q6 USB port (iPod/USB) ································· (13) w RPT (repeat) indicator This indicator lights up during repeat play. Q2 TTL (total time) indicator This indicator lights up above the total remaining time or the total program time, when it is displayed. e RNDM (random) indicator This indicator lights up during random play. r PROG (program) indicator This indicator lights up during program play. Q3 Main display area This area displays the time display and text information of the disc to be played, as well as the setting menu items, etc. t TRK (track) indicator This indicator lights up above the display of the track number currently being played. t Fast reversing/Reverse-skip button (8, 6) ····················································· (9) Q4 3 (pause) indicator This indicator lights up when play is paused. y Disc tray ······················································· (9) u Display ··························································· (5) i Play button (1) ············································· (8) o Stop button (2) ············································ (8) Q0 Pause button (3) ·········································· (8) y SA-CD indicator This indicator indicates the type of disc on the disc tray (Super Audio CD). Q5 1 (play) indicator This indicator lights up during disc play. u CD indicator This indicator indicates the type of disc on the disc tray (CD). i M FILE indicator This indicator indicates the type of disc on the disc tray (WMA/MP3). o USB indicator This indicator lights up during operation in the USB/iPod mode. Q0 D OFF (digital output OFF) indicator This indicator lights up when the digital output setting of the audio CD signal is set to OFF (vpage 11). 5 ENGLISH Part names and functions Getting started Rear panel Remote control q POWER button·············································· (8) w OPEN/CLOSE button (5) ····························· (9) e DIG. OUT button········································· (11) r S. MODE button ··········································· (8) t DISPLAY button·········································· (10) y TIME button ················································ (10) u TEXT button··········································· (20, 22) i Amplifier operation buttons VOLUME button (+, ­) INPUT button (d, f) MUTE button Basic connections q w e r q w e r ty ui o t y q ANALOG OUT connectors ··························· (7) w EXTERNAL/INTERNAL switch ·················· (13) e REMOTE CONTROL IN / OUT connectors············································ (13) Q5 Q6 Q8 W0 Q7 Q9 W1 W2 Basic operation Advanced connections r DIGITAL IN USB port (PC)·························· (13) t DIGITAL IN COAXIAL connector ··············· (12) y DIGITAL OUT COAXIAL connector ··········· (12) u DIGITAL OUT OPTICAL connector ············ (12) i DIGITAL IN OPTICAL connector ················ (12) o AC inlet (AC IN)············································· (7) u o FOLDER buttons ········································· (17) (FOLDER d, f) i W3 o Q0 Q1 Q2 W4 W5 Q3 Q4 Q0 Play button (1) ··································· (9, 16, 17) Q1 Track skip buttons (8, 9) ···················· (9) Q2 Search buttons (6, 7) ··························· (9) Q3 Number buttons (0 ­ 9) ································ (9) Q4 MENU button·············································· (19) Q5 INPUT button ················································ (8) Q6 DISC button ·················································· (8) Q7 FILTER button ····································(Not use) Q8 PROGRAM button ······································ (11) Q9 RANDOM button ········································ (10) W0 CLEAR button ············································· (11) W1 REPEAT button ··········································· (10) W2 Auto music scan button (AMS) ················· (11) W3 ENTER button ············································· (19) W4 Pause button (3) ·········································· (8) W5 Stop button (2) ············································ (8) Advanced operations Explanation of terms Troubleshooting Specifications ·The supplied remote control can operate Marantz amplifiers. ·When using it, also refer to the operating instructions of the other devices. Index NOTE The remote control may not operate some devices. 6 ENGLISH Basic connections This chapter explains how to connect the analog device (amp) and power cord. For other connections, see the sections below. Analog connection Amplifier AUDIO AUDIO IN L R n n n n Digital connection (vpage 12) USB memory device/iPod connection (vpage 13) PC connection (vpage 13) Remote control connection (vpage 14) L R NOTE ·Do not plug in the power cord until all connections have been completed. ·When making connections, also refer to the owner's manual of the other components. Loose connections will result in the generation of noise. ·Be sure to connect the left and right channels properly (left with left, right with right). (vpage 19) : Connect a digital device to the COAXIAL port (DIGITAL IN) on the rear panel, and use this unit as a D/A converter. (vpage 19) : Connect a digital device to the OPTICAL port (DIGITAL IN) on the rear panel, and use this unit as a D/A converter. (vpage 19) : Plays back the disc inside the disc tray. (vpage 9) 4 Press 1. Press 2. The "1" display lights, and playback begins. ·When all of the tracks recorded on the disc have finished playing back, playback stops automatically. [S. MODE] [DISPLAY] [TIME] Stopping Playback Stopping Playback temporarily Press 3. ·The "3" indicator lights. ·To restart playback, press 1 or 3. Coaxial Optical 3 1 [NUMBER] (0 ­ 9) [8, 9] 2 [6, 7] Disc Fast-Forwarding and Fast-Reversing (Searching) GUsing the buttons on the main unitH The search is started by holding down <8/6>, <7/9> during playback. The search speed can be changed by holding down <8/6>, You can press [DISC] to switch the input source to "Disc". <7/9>. The search speed changes in 4 steps: 1 4 is the fastest search speed. 2 3 4 1. GUsing the buttons on the remote controlH The search is started by pressing [6], [7] during playback. The search speed can be changed by pressing [6], [7]. The search speed changes in 4 steps: 1 2 3 4 1. 4 is the fastest search speed. 9 ENGLISH Playback CDs Getting started Moving to the Beginning of Tracks (Skipping) GUsing the buttons on the main unitH During playback, press <8/6> or <7/9>. [. . . ] Cause Corrective action Page ­ "OverCurrent" appears ·The voltage able to be supplied ·The USB memory device on the display. from this unit via the USB is not supported. Please memory device has been use a USB memory exceeded. device with an operating current that is less than 1 A. [. . . ]