User manual ONKYO FR-N3X

[. . . ] Contents Before Using CD/MD TUNER AMPLIFIER Connecting FR-N3X Preparations Instruction Manual Basic Operation Thank you for purchasing the Onkyo CD/MD TUNER AMPLIFIER. Please read this manual thoroughly before making connections and turning on the power. Following the instructions in this manual will enable you to obtain optimum performance and listening pleasure from your new CD/MD TUNER AMPLIFIER. Please retain this manual for future reference. Advanced Operation Additional Operation WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. [. . . ] Use / on the remote controller or MULTI JOG on the main unit to select a song on the CD, then press CD / or the remote controller's . The MD resumes recording. Checking the recording result See page 27. 31 Recording an FM/AM broadcast program to an MD To record a very long program, switch the recording mode. (Refer to page 36. ) 6 3 1 EDIT/ CLEAR/NO 4 MODE/YES 5 1 2 3 Insert an MD. Refer to Step 1 on page 22. Use a recordable MD. Check the available recording time on the MD. Refer to Step 2 on page 27. Select "FM" or "AM" for input. 4 Turn MULTI JOG to select a preset channel. 5 Press REC to set the FR-N3X into recording standby mode. Adjusting the recording level See page 38. Turning Level Sync on or off If the FR-N3X does not enter record stand-by mode See "Can't dub?" on page 36. See "Numbering the songs -- Level Sync" on page 39. 6 MD Press MD / (play/pause) to start recording. Elapsed time Tip! During recording, you can check the elapsed time and remaining time on the MD using the DISPLAY button (See page 35). Recording input source Recording track number When the MD is recorded up to its end, recording automatically stops. To stop a recording while in progress, press MD . The indicator lights up on the display. Press the button again to resume recording from the stopped point. At this time, the track number increases by one. Numbering the desired song(s) Press REC during recording of the desired song. If you do not hold down REC long enough (about four seconds or less), the song may not be numbered. 32 Recording from another Onkyo System (Synchro Recording) This function is useful when you record CDs while selecting tracks. It is also convenient for analog recording from another Onkyo system. The following operations are available if you connect an optional Onkyo casette tape deck to the FRN3X. ­ Synchro Recording from the unit CD to the stereo cassette tape deck ­ Synchro Recording from the unit MD to the stereo cassette tape deck ­ Synchro Recording from the stereo cassette tape deck to the MD unit. 1 2 For more information on Synchro recording from a CD or MD to a cassette tape, refer to the instruction manual for the cassette tape deck. This section explains how to perform Synchro recording from a cassette tape deck to an MD in the FR-N3X. 1 Set up the recording source (in this example, a cassette tape) and insert an MD in the MD recorder. Check the available recording time on the MD. If the display does not indicate the available recording time, press DISPLAY repeatedly. Available recording time (DISC REMAIN lights up. ) 2 3 Press REC to set the recorder in recording standby mode. Play the recording source (in this example, a cas- Pausing and selecting a track When you pause or stop the sette tape). source, the MD recorder enters Record Standby mode. Select a track, then play the source again. Note that when you press the MD recorder's button, the MD recorder stops, but the source (CD recorder) continues playback. Numbering the tracks Press the REC button at the point at which you wish to assign a track number. If you press the button with a short interval (about four seconds or less), you will be unable to assign track numbers. The recording starts. Cancelling Synchro recording Stop playback of the recording source. The MD recorder enters Record Standby mode. Checking the recorded data After recording is complete, press the MD recorder's / button or the remote controller's button for MD. Playback starts from the top of the recording. 33 Recording data from a connected external device to an MD You can record data from an external device (that you have connected following the explanation on page 9) to an MD. 5 2 1 5 MD Press MD / to start recording. When an MD is recorded up to its end, the MD automatically stops. 3 1 2 Insert an MD. Be sure to insert a recordable MD with the write-protection turned off. Numbering the desired song(s) Press REC while recording the desired song. If you do not hold down REC long enough (four seconds or less), the song may not be numbered. Press the button again to resume recording. [. . . ] [The waves transmitted from transmission center (direct waves) and the waves diffracted by buildings or mountains (diffraction waves) interfere with each other causing multi bass distortion. ] · Locate the AM indoor antenna far from the electric or electronic device. · Turn off the power to the interfering electric or electronic device. · Locate the AM indoor antenna further from the FR-N3X. -- -- Noise interferes with the An electric or electronic device with the AM reception. power turned on is in close proximity to the FR-N3X. [. . . ]