User manual ONKYO HT-R510

[. . . ] Contents Introduction AV Receiver HT-R510 Instruction Manual Important Safeguards. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Supplied Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Before Using the HT-R510. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Controls & Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Connections Connecting Your AV Components. . . . . . . . . . . . . . . . . . . . . . . . . 10 Connecting -compatible AV Components. . . . . . . . . . . . . . 19 Installing Your Speakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Connecting Antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Setup Powering Up & Setting Up the HT-R510 . . . . . . . . . . . . . . 24 Configuring Speaker Set A. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Operation Playing Your AV Components. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Using the Tuner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Common Functions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Using the Listening Modes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Audio Adjust Functions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Recording. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 Thank you for purchasing the Onkyo AV Receiver. Please read this manual thoroughly before making connections and plugging in the unit. Following the instructions in this manual will enable you to obtain optimum performance and listening enjoyment from your new AV Receiver. Please retain this manual for future reference. Remote Controller Using the Remote Controller RC-518M with Your Other AV Components. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 Appendix Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 En WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN AVIS RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). [. . . ] Enabling the Tone Controls To use the Bass and Treble functions with the multi-channel inputs, first you need to enable them. To do this, press the [SURROUND] button. "Tone On" appears on the display. You can now use the [AUDIO ADJUST] button to select the Bass and Treble functions and adjust as explained on page 37. To switch off the Bass and Treble functions, press the [DIRECT] button. "Tone Off" appears on the display. Notes: · To use the multi-channel inputs, you must connect an AV component with individual 5. 1-surround analog outputs to the HT-R510's multi-channel inputs. · You can select Multich only when the DVD input source is selected. · While Multich is selected, you can't select a listening mode. If you select Multich while using a listening mode, the listening mode will be cancelled. · While Multich is selected, the speaker configuration setting (page 25) is ignored, so even if you have specified two speakers, the multi-channel input signals will be fed to the front-left, front-right, center, surround-left, and surroundright speakers regardless. · While Multich is selected, the subwoofer mode (page 25) is ignored, so even if you have specified "Subwoofer Off, " the signal connected to the SUBWOOFER DVD IN will be fed to the SUBWOOFER PRE OUT regardless. 29 Using the Tuner This chapter explains how to use the built-in tuner. You can store your favorite radio stations as presets for convenient selection. MASTER VOLUME PRESET/ADJUST TUNING MASTER VOLUME STANDBY/ON DIRECT STEREO Tuning into Radio Stations 1 TUNER Use the [TUNER] input selector button to select either AM or FM. In this example, the FM band has been selected. SURROUND DSP STANDBY PRESET/ADJUST A SPEAKERS B DISPLAY DIMMER DIGITAL INPUT SUBWOOFER MODE MEMORY FM MODE TUNING SPEAKER ADJUST AUDIO ADJUST CLEAR Band VIDEO 3 INPUT S VIDEO VIDEO L AUDIO R Frequency PHONES AUDIO SELECTOR DVD VIDEO 1 VIDEO 2 VIDEO 3 TAPE TUNER CD VCR 2 MASTER VOLUME MEMORY TUNER FM MODE To adjust the volume, use the MASTER VOLUME control. The volume can typically be set to MIN, 1 though 79, or MAX. 3 PRESET CABLE/SAT CD/DVD / TUNING Press and hold the TUNING [ ] or [ ] button for more than half a second and then release it. CH + TUNER If you selected the FM band: The AUTO indicator appears on the display and the HT-R510 searches for the next station automatically. Searching stops when a station is found, and the TUNED and FM STEREO indicators appear, as shown. TUNED AUTO FM STEREO The HT-R510 searches the FM band in 0. 1 MHz intervals. If you selected the AM band: The frequency stops changing when you release the TUNING button. The HT-R510 doesn't automatically search for AM stations. You must use the TUNING [ ] [ ] buttons. Press repeatedly to change the frequency one interval at a time, or press and hold to quickly change the frequency. When you're tuned into a station, the TUNED indicator appears. The HT-R510 steps through the AM band in 10 kHz intervals. 4 TUNING To fine-tune the frequency, use the TUNING [ ] [ ] buttons. [. . . ] The power cord has not been connected to a wall outlet, or the power has been turned off for an extended period. You cannot record from an AV component that is connected digitally. Try an FM antenna with better directionality. Preset your favorite radio stations again (page 31). The power cord must be plugged into a wall outlet a few times each month in order to preserve the presets. Connect the AV component using analog connections (pages 10­19). [. . . ]