User manual ONKYO HT-RC270

[. . . ] Contents AV Receiver Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 HT-RC270 Instruction Manual Connections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Turning On & Basic Operations . . . . . . 24 Advanced Operations . . . . . . . . . . . . . . . . . 41 Controlling iPod & Other Components. . . . . . . . . . . . . . . . . . . . . . . . . . . . 71 Others. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82 Thank you for purchasing an Onkyo AV Receiver. Please read this manual thoroughly before making connections and plugging in the unit. Following the instructions in this manual will enable you to obtain optimum performance and listening enjoyment from your new AV Receiver. Please retain this manual for future reference. En Introduction WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN AVIS RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). [. . . ] [ BC OP @# ] Shift +10 D E QR $% ; ' Space F S ^ , G T & . H U I V ( J W ) K X _ L Y M Z ~ / Back Space CLR OK All Erase Shift A/V Sync A/V Sync 0ms to 250ms in 5 ms steps. When using your DVD player's progressive scanning function, you may find that the picture and sound are out of sync. With the A/V Sync setting, you can correct this by applying a delay to the audio signal. To view the TV picture while setting the delay, press ENTER. To return to the previous screen, press RETURN. If HDMI Lip Sync is enabled ( 54) and your TV or display supports HDMI Lip Sync, the displayed delay time will be the summation of the A/V Sync delay time and the HDMI Lip Sync delay time. The HDMI Lip Sync delay time is displayed underneath in parentheses. Note · A/V Sync is disabled when the Pure Audio listening mode is selected, or when the Direct listening mode is used with an analog input source. · "A/V Sync" is not operable when the input selector is set to "NET/USB". Shift*1: Switches the displayed character. (Left)/ (Right): Selected when the cursor is moved within the Name input area. Back Space*2: "Back Space" moves the cursor backward one character space. In addition, "Back Space" deletes the character to the left of the cursor. OK: Selects when the entry is complete. Tip *1 *2 You can also be performed on the remote controller by using +10. Press CLR on the remote controller, you can delete all characters in the input. To correct a character: 1 2 3 Use / / / to select " "(Left) or " "(Right), and then press ENTER. Press ENTER several times to select the incorrect character (The cursor moves one letter each time ENTER is pressed). Use / / / to select the correct character, and then press ENTER. Name Edit You can enter a custom name for each individual input selector (excluding TUNER) and radio preset for easy identification. When entered, the custom name will appear on the display. En 50 Note · To name a radio preset, use TUNER to select AM or FM, and then select the preset ( 33). · "Name Edit" is not operable when the input selector is set to "NET/USB". Wide Zoom: To restore a custom name to the default, erase the custom name by entering an empty white space for each letter. Picture Adjust Using "Picture Adjust", you can adjust the picture quality and reduce any noise appearing on the screen. To view the TV picture while setting, press ENTER. To return to the previous screen, press RETURN. Note · If you are using the analog RGB input, the following settings have no effect: "Film Mode", "Edge Enhancement", and "Noise Reduction". · "Picture Adjust" is not operable when the input selector is set to "NET/USB". Auto: According to the input signals and monitor output setting, the AV receiver automatically selects the "4:3", "Full", "Zoom" or "Wide Zoom" mode. Picture Mode*1*2 Through: The following settings are set to the default values: "Film Mode", "Edge Enhancement", "Noise Reduction", "Brightness", "Contrast", "Hue" and "Saturation" Custom: You can set the following settings as you like: "Film Mode", "Edge Enhancement", "Noise Reduction", "Brightness", "Contrast", "Hue" and "Saturation" Cinema: Selected when the picture source is movie film, etc. Game: Select to use in connecting a game console. [. . . ] Start playback of the Blu-ray Disc/DVD player/ recorder, and confirm the following. · The power of the AV receiver is turned on automatically, and input with the Blu-ray Disc/DVD player/recorder connected is selected. · The power of the TV is turned on automatically, and input with the AV receiver connected is selected. Following the operating instructions of the TV, select "Use the TV speakers" from the menu screen of the TV, and confirm that the audio is output from the speakers of the TV, and not from the speakers connected to the AV receiver. [. . . ]