User manual ONKYO HT-S9405THX

[. . . ] Please read this manual thoroughly before making connections and plugging in the unit. Following the instructions in this manual will enable you to obtain optimum performance and listening enjoyment from your new AV Receiver. Please retain this manual for future reference. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. [. . . ] To correct a character: 1 2 3 Tip Use q/w/e/r to select “ ”(Left) or “ ”(Right), and then press ENTER. Press ENTER several times to highlight the incorrect character (For each pressure, the cursor is moved on the next character). Use q/w/e/r to select the correct character, and then press ENTER. 1 2 Use q/w/e/r to select a character, and then press ENTER. Repeat this step to enter up to 10 characters. To store a name when you’re done, be sure to select “OK” by using q/w/e/r, and then press ENTER. € To name a radio preset, use TUNER to select AM or FM, and then select the preset (➔ page 28). € To restore a custom name to its default, erase the custom name by entering an empty white space for each letter. Note • This setting cannot be used for the NET and USB input selector. En 50 Picture Adjust Using Picture Adjust, you can adjust the picture quality and reduce any noise appearing on the screen. To view the TV picture while setting, press ENTER. To return to the previous screen, press RETURN. , game console), select the corresponding input source and set the “Game Mode” setting to “On”. The delay will decrease but in return the picture quality will become poor. – Film Mode*3*5*6 Video: “Film Mode” detection is not applied and the input signal is handled as a video source. auto: Detects whether the input signal is a video or a movie. If it is a movie, the appropriate conversion is applied. The AV receiver will adjust to the picture source, automatically converting it to the appropriate progressive signal and reproducing the natural quality of the original picture. – Edge Enhancement*3*5*6*7 Off Low Mid High With Edge Enhancement, you can make the picture appear sharper. – Noise Reduction*3*5*6*7 Off Low Mid High With this setting, you can reduce noise appearing on the screen. – Brightness*1*3*5 –50 to 0 to +50 With this setting you can adjust the picture brightness. – Contrast*1*3*5 –50 to 0 to +50 With this setting you can adjust contrast. [. . . ] Note • Perform the above operations when you use the AV receiver for the first time, when the settings of each component are changed, when the main power of each component is turned off, when the power cable is disconnected from the power supply, or when there has been a power outage. Connect the HDMI output of the Blu-ray Disc/DVD player/recorder to the HDMI IN 1 jack of the AV receiver. Note • It is necessary to assign the HDMI input when connecting the Blu-ray Disc/DVD player/recorder to other jacks (➔ page 42). Do not assign the components connected to the HDMI IN to the TV/CD input at this time. [. . . ]