User manual ONKYO HTP-240

[. . . ] Contents 5. 1 Ch Home Theater Speaker Package Getting Started Important Safeguards . . . . . . . . . . . . . . . . . . . . . 2 Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Simply connect each speaker cable to the same-colored speaker terminals. SKS-HT240 The SKS-HT240 is a 6. 1-channel speaker package consisting of front left and right speakers, a center speaker, surround left and right speakers, a surround back speaker, and a powered subwoofer. Simply connect the speakers to your AV amp or receiver for superb surround sound playback. Speaker terminals and speaker cables are color-coded for easy identification. Simply connect each speaker cable to the same-colored speaker terminals. Package Contents Make sure your box contains all of the items below. If anything is missing, contact the nearest Onkyo dealer. · Front speakers (SKF-240F) · Speaker cable for front speakers 15 ft. (4. 5 m) · Spacers for wall mounting [×20] (HTP-240 only) · Setup sheet (HTP-240 only) · Front speaker base fixing screws [×8] · Front speaker bases (Red) (White) · Center speaker (SKC-240C) · Speaker cable for center speaker 10 ft. (3 m) · Center speaker base (Green) · Surround speakers (SKM-240S) · Speaker cables for surround speakers 30 ft. (9 m) · Subwoofer (SKW-240) · RCA cable for subwoofer connection (Blue) (Gray) Items Supplied with SKS-HT240 Only · Surround back speaker (SKB-240) · Speaker cable for surround back speaker 30 ft. (9 m) · Spacers for wall mounting [×24] (Brown) 4 Getting to know Your Speaker Package Subwoofer (SKW-240) Front Front, Center & Surround Speakers (SKF-240F, SKC-240C, SKM-240S, SKB-240) 3 2 1 Rear 1 OUTPUT LEVEL LINE INPUT MIN MAX 4 2 3 To AC outlet 1 Speaker terminals These push terminals are for connecting the speaker to your DR-S2. 2 DVD Receiver, amp, or other receiver with the supplied speaker cables. The supplied speaker cables are color-coded for easy identification. Simply connect each cable to the samecolored positive speaker terminal. A STANDBY/ON indicator Red: Subwoofer in standby mode Green: Subwoofer on With the Auto Standby function, the SKW-240 automatically turns on when an input signal is detected in Standby mode. When there's no input signal for about 20 minutes, the SKW-240 automatically enters Standby mode. 2 Keyhole slots These keyhole slots can be used to wall-mount the speaker either horizontally or vertically. B OUTPUT LEVEL control This control is used to adjust the volume of the subwoofer. 3 Speaker mount/bracket inserts These threaded inserts can be used to attach the speaker either horizontally or vertically to a speaker mount or bracket. Note: Use commercially available 1/4-inch machine screws to attach the speaker to a speaker mount or bracket. C LINE INPUT This RCA input should be connected to the subwoofer preout on your DR-S2. 2 DVD Receiver, amp, or other receiver with supplied RCA cable. Note: The Auto Standby function turns the subwoofer on when the input signal exceeds a certain level. Refer to the manual supplied with your mounts or brackets for installation details. Spacers Spacers 2-9/16" Use this hole if mounting vertically 2-9/16" 4-7/8" 7-9/16" 4-7/8" Caution: A mounting screw's ability to support a speaker depends on how well it's anchored to the wall. If you have hollow walls, screw each mounting screw into a stud. If there are no studs, or the walls are solid, use suitable wall anchors. Use screws with a head diameter of 3/8 inch or less and a shank diameter of 1/8 inch (or 4 mm) or less (No. With hollow walls, use a cable/pipe detector to check for any power cables or water pipes before making any holes. (We recommend that you consult a home installation professional. ) Use this hole if mounting horizontally Note: The portion of the screw that goes into the speaker's threaded insert should be between 1/5 and 3/8 of an inch long. Mount or bracket Using the Optional Speaker Stands Optional Onkyo speaker stands (AS-240) are available for the front left and right and surround left and right speakers. To attach a speaker to a stand, align the mounting holes in the stand with those on the speaker's rear panel, and secure by using four of the supplied fixing screws. 1/4" 1/5"­3/8" 7 Connecting the Speakers Read the following before connecting your speakers: · Turn off your amp before making any connections. [. . . ] The subwoofer produces hardly any sound?A humming sound can be heard from the subwoofer?The source material contain little or no bass content. The RCA cable is not properly connected to the subwoofer's LINE INPUT. [. . . ]