User manual ONKYO PR-SC5507

[. . . ] Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 AV Controller Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 PR-SC5507 Turning On & First Time Setup . . . . . 43 Basic Operations. . . . . . . . . . . . . . . . . . . . . . . . . 62 Instruction Manual Using the Listening Modes . . . . . . . . 75 Advanced Setup . . . . . . . . . . . . . . . . . . . . . . . . . . 86 NET/USB. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115 Multi Zone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125 Thank you for purchasing an Onkyo AV Controller. Please read this manual thoroughly before making connections and plugging in the unit. Following the instructions in this manual will enable you to obtain optimum performance and listening enjoyment from your new AV Controller. Please retain this manual for future reference. Controlling Other Components. . . . 133 Others. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148 En WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN AVIS RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). [. . . ] "­20" is the strongest green. Saturation ­50 to +50 (default: 0) With this setting you can adjust saturation. "­50" is the weakest color. Red Brightness ­50 to +50 (default: 0) With this setting you can adjust the picture red brightness. Red Contrast ­50 to +50 (default: 0) With this setting you can adjust red contrast. Green Brightness ­50 to +50 (default: 0) With this setting you can adjust the picture green brightness. Green Contrast ­50 to +50 (default: 0) With this setting you can adjust green contrast. Blue Brightness ­50 to +50 (default: 0) With this setting you can adjust the picture blue brightness. Blue Contrast ­50 to +50 (default: 0) With this setting you can adjust blue contrast. HDMI Input See "HDMI Input Setup" on page 49. 87 Advanced Setup--Continued Component Video Input See "Component Video Input Setup" on page 50. Digital Audio Input See "Digital Audio Input Setup" on page 51. Analog Audio Input Multich See "Analog Audio Input Setup" on page 52. Subwoofer Input Sensitivity 0 dB (default), 5 dB, 10 dB, 15 dB Some DVD players output the LFE channel from their analog subwoofer output at 15 dB higher than normal. With this setting, you can change the AV controller's subwoofer sensitivity to match your DVD player. Note that this setting only affects signals connected to the AV controller's MULTI CH: SUBWOOFER jack. If you find that your subwoofer is too loud, try the 10 dB or 15 dB setting. Balance Input Channel See "Analog Audio Input Setup" on page 52. See "Analog Audio Input Setup" on page 52. 88 Advanced Setup--Continued Gamma Curve The color range and the brightness characteristic of a reproduced image depend on the TV or projector. With this setting, you can adjust the balance of the color signals (R, G, and B). To view the TV picture while setting, press the [ENTER] button. To return to the default, press the [CLR] button. The "Gamma Curve" setting is set respectively of HDMI main, HDMI sub, and analog. Red Gamma 0 to Red Gamma 9 Green Gamma 0 to Green Gamma 9 Blue Gamma 0 to Blue Gamma 9 The following graph shows the default settings. Output 224 192 160 128 96 80 64 48 32 24 Gamma0 Gamma1 Gamma2 Gamma3 Gamma4 Gamma5 Gamma6 Gamma7 Gamma8 Gamma9 Input 89 Advanced Setup--Continued Speaker Setup Some of the settings in this section are set automatically by Audyssey MultEQ® XT Room Correction and Speaker Setup (see page 56). [. . . ] In the unlikely event that this happens, unplug the power cord from the wall outlet, wait at least five seconds, and then plug it back in again. Onkyo is not responsible for damages (such as CD rental fees) due to unsuccessful recordings caused by the unit's malfunction. Before you record important data, make sure that the material will be recorded correctly. Before disconnecting the power cord from the wall outlet, set the AV controller to Standby. Important Note Regarding Video Playback The AV controller can upconvert component video, SVideo, and composite video sources for display on a TV connected to the HDMI outputs. [. . . ]