User manual ONKYO PR-SC5508

[. . . ] Contents AV Controller Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 PR-SC5508 Instruction Manual Connections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Turning On & Basic Operations . . . . . . 25 Advanced Operations . . . . . . . . . . . . . . . . . 43 Controlling iPod & Other Components. . . . . . . . . . . . . . . . . . . . . . . . . . . . 81 Others. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94 Thank you for purchasing an Onkyo AV Controller. Please read this manual thoroughly before making connections and plugging in the unit. Following the instructions in this manual will enable you to obtain optimum performance and listening enjoyment from your new AV Controller. Please retain this manual for future reference. En Introduction WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN AVIS RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). [. . . ] Green Contrast*2*4 ­50 to 0 to +50 With this setting you can adjust green contrast. Blue Brightness*2*4 ­50 to 0 to +50 With this setting you can adjust the picture blue brightness. "+50" is the brightest. En 57 Blue Contrast*2*4 ­50 to 0 to +50 With this setting you can adjust blue contrast. "+50" is the greatest. Tip *1 *2 Analog/PCM With this setting, you can specify the listening mode to be used when an analog (CD, TV, LD, VHS, MD, turntable, radio, cassette, cable, satellite, etc. ) or PCM digital (CD, DVD, etc. ) audio signal is played. Mono/Multiplex Source With this setting, you can specify the listening mode to be used when a mono digital audio signal is played (DVD, etc. ). 2ch Source With this setting, the default listening mode for 2-channel (2/0) stereo sources in a digital format, such as Dolby Digital or DTS. Dolby D/Dolby D Plus/TrueHD With this setting, you can specify the listening mode to be used when a Dolby Digital or Dolby Digital Plus format digital audio signal is played (DVD, etc. ). Specifies the default listening mode for Dolby TrueHD sources, such as Blu-ray or HD DVD (input via HDMI). DTS/DTS-ES/DTS-HD With this setting, you can specify the listening mode to be used when a DTS or DTS-HD High Resolution Audio format digital audio signal is played (DVD, LD, CD, etc. ). Specifies the default listening mode for DTSHD Master Audio sources, such as Blu-ray or HD DVD (input via HDMI). Other Multich Source Specifies the default listening mode for multichannel PCM sources from HDMI IN such as DVD-Audio, and DSD multichannel sources such as Super Audio CD. This procedure can also be performed on the remote controller by using the Home menu ( 27). Press CLR if you want to reset to the default value. Note · If you are using the analog RGB input, the following settings have no effect: "Film Mode", "Edge Enhancement", "Mosquito NR", "Random NR" and "Block NR". · "Picture Adjust" is not operable when the input selector is set to "NET/USB". *3 These settings have no effect in the case of HD input source (720p, 1080i, 1080p, 1080p/24). *4 When the "Picture Mode" setting is set to anything other than "Custom", this setting cannot be used. *5 Depending on the input and output resolutions, "Smart Zoom" may not be used. *6 When the "Game Mode" setting is set to "On", this setting cannot be selected. *7 This setting has no effect in the case of downconversion. Listening Mode Preset You can assign a default listening mode to each input source that will be selected automatically when you select each input source. For example, you can set the default listening mode to be used with Dolby Digital input signals. You can select other listening modes during playback, but the mode specified here will be resumed once the AV controller has been set to Standby. 1 Main menu Listening Mode Preset Use / to select the input source that you want to set, and then press ENTER. BD/DVD VCR/DVR CBL/SAT GAME PC AUX For "TUNER" input selector only "Analog" will be available. For "NET/USB" input source only "Digital" will be available. Note · If you connect an input component (such as UP-A1 series Dock that seated iPod) to the UNIVERSAL PORT jack, you can assign only listening modes for the analog sound to "PORT" selector. 2 En 58 Use / to select the signal format that you want to set, and then use / to select a listening mode. [. . . ] An update file is not found in the root folder of the USB storage device, or an update file is for other model. Retry download following instructions at the support website. If the error persists, please contact Onkyo Support and provide the error code. Retry the update procedure from the beginning. [. . . ]