User manual ONKYO PR-SC5509

[. . . ] Contents AV Controller Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 PR-SC5509 Instruction Manual Connections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Turning On & Basic Operations . . . . . . 25 Advanced Operations . . . . . . . . . . . . . . . . . 48 Controlling Other Components. . . 77 Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86 Thank you for purchasing an Onkyo AV Controller. Please read this manual thoroughly before making connections and plugging in the unit. Following the instructions in this manual will enable you to obtain optimum performance and listening enjoyment from your new AV Controller. Please retain this manual for future reference. En Introduction WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN AVIS RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). [. . . ] A home theater system automatically calibrated by Audyssey MultEQ XT32 will play at reference level when the master volume control is set to the 0 dB position. At that level you can hear the mix as the mixers heard it. Audyssey Dynamic EQ is referenced to the standard film mix level. It makes adjustments to maintain the reference response and surround envelopment when the volume is turned down from 0 dB. However, film reference level is not always used in music or other nonfilm content. Audyssey Dynamic EQ Reference Level Offset provides three offsets from the film level reference (5 dB, 10 dB, and 15 dB) that can be selected when the mix level of the content is not within the standard. Note • If “Dynamic EQ” setting is set to “Off”, these technologies cannot be used. Audyssey The tone for each speaker is set automatically by Audyssey MultEQ® XT32 Room Correction and Speaker Setup. To enable the following settings, you must first perform the Room Correction and Speaker Setup (➔ page 34). • These technologies cannot be used when: – a pair of headphones is connected, or – either Pure Audio or Direct listening mode is selected. ■ Audyssey Off Movie: Select this setting for movie material. Music: Select this setting for music material. The Audyssey indicator lights. Note • If the “Audyssey” setting is set to “Off”, the “Equalizer” settings are applied (➔ page 55). • When “Audyssey Quick Start” has been used for measurement, the “Audyssey”setting cannot be selected. • Audyssey equalizing does not work with DSD sources. En 59 ■ Dynamic Volume Off Light: Activates Light Compression Mode. Medium: Activates Medium Compression Mode. Heavy: Activates Heavy Compression Mode. It quiets the loud parts, such as explosions, and boosts the quiet parts so they can be heard. Note • If you want to use Audyssey Dynamic EQ® or Audyssey Dynamic Volume® with THX listening modes, set the “Loudness Plus” setting to “Off” and set “Preserve THX Settings” to “No” (➔ page 55). • If you make Dynamic Volume active, “Dynamic EQ” is set to “On”. • When “Dynamic EQ” is set to “Off”, “Dynamic Volume” is automatically switched to “Off”. IntelliVolume ■ IntelliVolume –12dB to 0dB to +12dB in 1 dB steps. With IntelliVolume, you can set the input level for each input selector individually. This is useful if one of your source components is louder or quieter than the others. If a component is noticeably louder than the others, use e to reduce its input level. If it’s noticeably quieter, use r to increase its input level. Note • IntelliVolume does not work for Zone 2/3. A/V Sync ■ A/V Sync 0msec to 800msec in 5 msec steps. [. . . ] For more information, see the Microsoft web site. En 102 Supported Audio File Formats For server playback and playback from a USB device, the AV controller supports the following music file formats. Variable bit-rate (VBR) files are supported. However, playback time may not be display correctly. Note • With remote playback, the AV controller does not support the following music file formats: FLAC and Ogg Vorbis. • In the case of server playback, the below-mentioned file formats may not be played depending on the server type. ■ LPCM (Linear PCM) • Sampling rates of 8 kHz, 11. 025 kHz, 12 kHz, 16 kHz, 22. 05 kHz, 24 kHz, 32 kHz, 44. 1 kHz, 48 kHz, 64 kHz, 88. 2 kHz, and 96 kHz are supported. [. . . ]