User manual ONKYO PR-SC886

[. . . ] Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 AV Controller Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 PR-SC886 First Time Setup . . . . . . . . . . . . . . . . . . . . . . . . . . 46 Basic Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . 64 Using the Listening Modes . . . . . . . . 75 Advanced Setup . . . . . . . . . . . . . . . . . . . . . . . . . . 86 Zone 2 and Zone 3. . . . . . . . . . . . . . . . . . . . . 115 Controlling Other Components . . 122 Instruction Manual Thank you for purchasing an Onkyo AV Controller. Please read this manual thoroughly before making connections and plugging in the unit. Following the instructions in this manual will enable you to obtain optimum performance and listening enjoyment from your new AV Controller. Please retain this manual for future reference. Others. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127 En WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN AVIS RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). [. . . ] In addition to displaying text information, RDS can also help you find radio stations by type (e. g. , news, sport, rock, etc. ). The AV controller supports four types of RDS information: PS (Program Service) Science and technology Varied Pop music Rock music Middle of the road music Light classics Serious classics Other music Weather Finance Children's programmes Social affairs Religion Phone in Travel Leisure Jazz music Country music National music Oldies music Folk music Documentary Alarm test Alarm When tuned to an RDS station that's broadcasting PS information, the station's name will be displayed. Pressing the [DISPLAY] button will display the frequency for 3 seconds. RT (Radio Text) When tuned to an RDS station that's broadcasting text information, the text will be shown on the display (see page 73). PTY (Program Type) This allows you to search RDS radio stations by type (see page 73). TP (Traffic Program) This allows you to search for RDS radio stations that broadcast traffic information (see page 73). Notes: · In some cases, the characters displayed on the AV controller may not be identical to those broadcast by the radio station. Also, unexpected characters may be displayed when unsupported characters are received. · If the signal from an RDS station is weak, RDS data may be displayed intermittently or not at all. 72 Listening to the Radio--Continued Displaying Radio Text (RT) RT/PTY/TP 4 To start the search, press [ENTER]. The AV controller searches until it finds a station of the type you specified, at which point it stops briefly before continuing with the search. When a station you want to listen to is found, press [ENTER]. If no stations are found, the message "Not Found" appears. 5 When tuned to an RDS station that's broadcasting text information, the text can be displayed. The RT information scrolls across the display. Notes: · The message "Waiting" may appear while the AV controller waits for the RT information. · If the message "No Text Data" appears on the display, no RT information is available. Listening to Traffic News (TP) 2 1 Finding Stations by Type (PTY) 3 You can search for stations that broadcast traffic news. 2 31 4, 5 1 Use the [TUNER] input selector button to select FM. 2 You can search for radio stations by type. 1 Use the [TUNER] input selector button to select FM. Press the [RT/PTY/TP] button three times. If the current radio station is broadcasting TP (Traffic Program), "[TP]" will appear on the display and traffic news will be heard as and when it's broadcast. If "TP" without square brackets appears, this means that the station is not broadcasting TP. To locate a station that is broadcasting TP, press [ENTER]. The AV controller searches until it finds a station that's broadcasting TP. If no stations are found, the message "Not Found" appears. 3 2 Press the [RT/PTY/TP] button twice. The current program type appears on the display. 3 Use the PRESET [ ]/[ ] buttons to select the type of program you want. See the table on page 72. 73 Recording This section explains how to record the input source and how to record audio and video from separate sources. Notes: · The surround sound and DSP listening modes cannot be recorded. · Copy-protected DVDs cannot be recorded. · Sources connected to the analog multichannel input cannot be recorded. [. . . ] · Make sure you've entered the correct remote control code (page 122). Don't mix different types of batteries, or old and new batteries (page 15). 129 Troubleshooting--Continued Recording Can't record · On your recorder, make sure the correct input is selected. · To prevent signal loops and damage to the AV controller, input signals are not fed through to outputs with the same name (e. g. , TAPE IN to TAPE OUT or VCR/DVR IN to VCR/DVR OUT). · When the Pure Audio listening mode is selected, video recording is not possible because no video signals are output. [. . . ]