User manual ONKYO T-4211

[. . . ] Please read this manual thoroughly before making connections and plugging in the unit. Following the instructions in this manual will enable you to obtain optimum performance and listening enjoyment from your new Tuner. Please retain this manual for future reference. Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] (The amplifier's POWER switch must be set to ON for this to work. ) Direct Change When you select a radio preset or change the band (AM, FM, etc. ), your Onkyo amplifier will automatically select the T-4211 as the input source. Remote Control Operation You can control the T-4211 by using your Onkyo amplifier's remote controller. See the amplifier's instruction manual for details. T-4211 Supplied audio cable L R TUNER Supplied cable Amplifier Note: · If the T-4211 is used with another Onkyo component, such as the A-9555, refer to its instruction manual as well. 13 Connecting the T-4211--Continued With (Remote Interactive), you can control your -capable Onkyo CD player, T-4211, and so on with your amp's remote controller. · To use , you must make an analog audio connection between your amplifier and each audio component. Onkyo amplifier (A-9555), etc. Connecting the 12V Trigger Jacks To have the T-4211 turn on automatically when another component is turned on, connect the T-4211's 12V TRIGGER IN jack to a 12-volt trigger output on the other component with a miniplug cable. Likewise, to have another component turn on automatically when the T-4211 is turned on, connect the T-4211's 12V TRIGGER OUT jack to a 12-volt trigger input on the other component with a miniplug cable. Amplifier, AV receiver, etc. MASTER VOLUME STANDBY/ON Onkyo CD player (DX-7555), etc. jack 12V TRIGGER OUT ZONE 2 STANDBY READY ZONE 2 ZONE 3 PURE AUDIO AUDIO SEL DVD VCR/DVR CBL/SAT GAME/TV AUX 1 AUX 2 TAPE TUNER CD PHONO DISPLAY PUSH TO OPEN T-4211 jack T-4211 12V TRIGGER CD player, etc. IN jack Remote Interactive Dock, etc. cable Notes: · Push each plug in all the way to make a good connection. · Use only dedicated cables for connections. cables are supplied with Onkyo tuners and players (DVD, CD, etc. ). · Some components, including the T-4211, have two jacks. They're both the same, so use either one. · jacks should be connected only to Onkyo components. Connecting them to another manufacturer's component may cause a malfunction. Note: Hardware and required monthly subscription sold separately. Other fees and taxes, including a one-time activation fee may apply. All fees and programming subject to change. Channels with frequent explicit language are indicated with an XL. Channel blocking is available for XM radio receivers by calling 1-800-XMRADIO (US residents) and 1-877-GET-XMSR (Canadian residents). For a full listing of the XM commercial-free channels and advertising-supported channels, visit lineup. xmradio. com (US residents) or xmradio. ca (Canadian residents). Subscriptions subject to Customer Agreement available at xmradio. com (US residents) and xmradio. ca (Canadian residents). Only available in the 48 contiguous United States and Canada. All other trademarks are the property of their respective owners A warning against reverse engineering: It is prohibited to copy, decompile, disassemble, reverse engineer, or manipulate any technology incorporated in receivers compatible with the XM Satellite Radio system. Furthermore, the AMBE® voice compression software included in this product is protected by intellectual property rights including patent rights, copyrights, and trade secrets of Digital Voice Systems, Inc. The user of this or any other software contained in an XM Radio is explicitly prohibited from attempting to copy, decompile, reverse engineer, or disassemble the object code, or in any other way convert the object code into humanreadable form. [. . . ] · Unplug the power cord from the wall outlet, wait 5 seconds or more, then plug it in again. Audio There's no sound. · Make sure your amplifier's volume control is not set to minimum. · Check all connections and correct as necessary (see pages 11 to 15). Tuner Reception is noisy, stereo FM reception suffers from hiss, or the STEREO indicator doesn't light up when tuned to a stereo FM station. · · · · · · · · · Check the antenna connections (see page 11). [. . . ]