Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual ONKYO T-4355. We hope that this ONKYO T-4355 user guide will be useful to you.
Lastmanuals help download the user guide ONKYO T-4355.
Detailed instructions for use are in the User's Guide.
[. . . ] Contents
AM/FM Tuner
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
T-4355
Instruction Manual
Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Enjoying Audio Sources. . . . . . . . . . . . . . 14
Thank you for purchasing an Onkyo AM/FM Tuner. [. . . ] · Do not bind audio cables with power cords and speaker cables. Doing so may adversely affect the sound quality. · To prevent interference, keep power cords and speaker cables as far away as possible from the tuner's antennas.
RCA Audio Connection Color Coding
· Red connectors are used for the right channel, and white connectors are used for the left channel.
Left (white) L
Right (red)
R
· Push each plug in all the way to make a good connection (loose connections can cause noise or malfunctions).
Right!
Wrong!
Connecting an amplifier
Use the supplied audio cable to connect the T-4355's ANALOG AUDIO OUTPUT L/R jacks to the analog input jacks on the amplifier, as shown. To use the system functions, use the supplied cable to make an connection.
T-4355
Supplied audio cable
L
Supplied
cable
CD PHONO TUNER
MD
TAPE
DOCK POWER BASS A SPEAKERS B PHONES PURE DIRECT
OFF OFF
TREBLE LOUDNESS
R TUNER
ON
OFF
MUTING
ON
ON
STANDBY
Amplifier
Notes: · The T-4355 has two jacks. They're both the same, so you can use either one. · To use , you must make an audio connection between the T-4355 and the other component. · Use only dedicated cables for connections. · If the T-4355 is used with another Onkyo component, such as the A-9355/A-9155, refer to its instruction manual as well.
10
Connecting the T-4355--Continued
About the System Functions
If you connect the T-4355 to another Onkyo -capable component with the supplied cable and audio cable, you can use the following system functions. cables are special cables solely for use with Onkyo products. Direct Change When you select a radio preset or change the band (AM, FM), your Onkyo amplifier will automatically select the T-4355 as the input source. Remote Control Operation You can control the T-4355 by using your Onkyo amplifier's remote controller. See the amplifier's instruction manual for details. With (Remote Interactive), you can control your -capable Onkyo CD player, T-4355, and so on with your amplifier's remote controller. · To use , you must make an analog audio connection between your amplifier and each audio component.
Onkyo amplifier (A-9355), etc.
Notes: · Push each plug in all the way to make a good connection. · Use only dedicated cables for connections. cables are supplied with Onkyo tuners and players (DVD, CD, etc. ). · Some components, including the T-4355, have two jacks. They're both the same, so use either one. · jacks should be connected only to Onkyo components. Connecting them to another manufacturer's component may cause a malfunction. · Some components may not support all functions. See the manuals supplied with your other Onkyo components for more information.
jack Onkyo CD player (DX-7355), etc.
jack T-4355
jack
Remote Interactive Dock, etc.
cable
11
Connecting Antennas
This section explains how to connect the supplied indoor FM antenna and AM loop antenna and how to connect commercially available outdoor FM and AM antennas.
AM antenna push terminals FM antenna jack
Connecting the AM Loop Antenna
The supplied indoor AM loop antenna is for indoor use only.
1
Assemble the AM loop antenna, inserting the tabs into the base, as shown.
2
Connecting the Indoor FM Antenna
The supplied indoor FM antenna is for indoor use only.
1
Attach the FM antenna, as shown.
Connect both wires of the AM loop antenna to the AM push terminals, as shown. [. . . ] · The wrong input source is selected on your amplifier. Check your amplifier's input source setting. · Make sure the amplifier's volume control is not set to minimum.
Radio
Reception is noisy, stereo FM reception suffers from hiss, the Auto Preset function doesn't preset all stations, or the ST indicator doesn't light up when tuned to a stereo FM station. · Change the position of the antenna. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE ONKYO T-4355
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual ONKYO T-4355 will begin.