User manual ONKYO TA-RW11 service manual
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual ONKYO TA-RW11. We hope that this ONKYO TA-RW11 user guide will be useful to you.
Lastmanuals help download the user guide ONKYO TA-RW11.
Manual abstract: user guide ONKYO TA-RW11service manual
Detailed instructions for use are in the User's Guide.
[. . . ] Noise reduction of 20 dB at 5 kHz possible with Dolby C.
Input Jacks: LINE IN: 2 Input sensitivity: 80 mV Input impedance: 50 k ohm Output Jacks: LINE OUT: 2 Standard output level: 500 mV Output load impedance:over 50 k ohm Motors: DC servo motor: 1+1 Heads: PB Head: Special Hard Permalloy x 1 Rec/PB Head: Special Hard Permalloy x 1 Erase head: Ferrite x 1 Power supply rating: North American: AC 120 V, 60 Hz European: AC 230 - 240 V, 50 Hz Power consumption: 17 W Standby power consumption: North American: 7. 0 W European: 0. 6 W Dimensions: (W x H x D): 435 mm x 121 mm x 303 mm (17-1/8" x 4-3/4" x 11-15/16") Weight: 4. 9 kg (10. 8 lbs. ) Operation condition temperature/humidity: 5 C - 35 C/ 5% - 85% (no condensation)
Specifications and external appearance are subject to change without notice because of product improvements.
TA-RW11
EXPLODED VIEW
P102 Z009 x 4 pcs. A301
Z002 P801 P101 P901A A029 x 2 pcs. A010 A011 x 2 pcs.
A026 A208
Z001 A202 x 7 pcs. A013 A316 A317 A305
A004 x 2 pcs.
A014 x 2 pcs. [. . . ] (%)
: 10 kHz : 1 kHz : 100 Hz 1. 0 VCC = 14 V, RPIin, PBmode PBOUT, 0 dB = 775 mVrms, 25 Hz HPF, 80 kHz LPF, NR-OFF
0. 1
0. 01 15
10
5
0
5
10
15
Output Level Vout (dB)
40
HA12167FB/HA12169FB
Total Harmonic Distortion vs. Output Level (5) 10
Total Harmonic Distortion T. H. D. (%)
: 10 kHz : 1 kHz : 100 Hz 1. 0 VCC = 14 V, RPIin, PBmode PBOUT, 0 dB = 775 mVrms, 25 Hz HPF, 80 kHz LPF, NR-B
0. 1
0. 01 15
10
5
0
5
10
15
Output Level Vout (dB)
Total Harmonic Distortion vs. Output Level (6) 10 : 10 kHz : 1 kHz : 100 Hz
Total Harmonic Distortion T. H. D. (%)
VCC = 14 V, RPIin, PBmode PBOUT, 0 dB = 775 mVrms, 25 Hz HPF, 80 kHz LPF, 1. 0 NR-C
0. 1
0. 01 15
10
5
0
5
10
15
Output Level Vout (dB)
41
HA12167FB/HA12169FB
Maximum Output Level vs. Supply Voltage (1) HA12167FB 20 : NR-OFF : NR-B : NR-C Maximum Output Level vs. Supply Voltage (2) HA12167FB 20 : NR-OFF : NR-B : NR-C
Maximum Output Level Vo max (dB)
15
Maximum Output Level Vo max (dB)
15
10 RECmode, RECOUT RPIin, f = 1 kHz 0 dB = 300 mVrms T. H. D. = 1% 5 8 10 12 14 16 Supply Voltage VCC (V)
10 PBmode, PBOUT RPIin, f = 1 kHz 0 dB = 775 mVrms T. H. D. = 1% 5 8 10 12 14 16 Supply Voltage VCC (V)
Maximum Output Level vs. Supply Voltage (3) HA12169FB 20 : NR-OFF : NR-B : NR-C
Maximum Output Level vs. Supply Voltage (4) HA12169FB 20 : NR-OFF : NR-B : NR-C
Maximum Output Level Vo max (dB)
15
Maximum Output Level Vo max (dB)
15
10 RECmode, RPIin, RECOUT 0 dB = 300 mVrms 25 Hz HPF +19 kHz LPF T. H. D. Frequency (1) 20 Ripple Rejection Ratio R. R. R. (dB) RECVol, VRI3in, RECOUTout I. DAC = 0, VCC = 14 V C 20 B
0
40 OFF 60
80 10
100
1k
10 k
100 k
1M
Frequency (Hz)
48
HA12167FB/HA12169FB
Ripple Rejection Ratio vs. Frequency (2) 20 Ripple Rejection Ratio R. R. R. (dB) RECVol, VRI3in, EQOUTout I. DAC = 0, EQ, DAC = 0 C VCC = 14 V B
0
20
40
60
OFF
80 10
100
1k
10 k
100 k
1M
Frequency (Hz)
Ripple Rejection Ratio vs. Frequency (3) Ripple Rejection Ratio R. R. R. (dB) 0 PBVol, VRI3in, PBOUTout I. DAC = 0, VCC = 14 V 10
20 OFF 30 C
B
40 45 10
100
1k
10 k
100 k
1M
Frequency (Hz)
49
HA12167FB/HA12169FB
Input Volume Gain vs. DAC Step (1) HA12167FB 40
20 Input Volume Gain (dB)
0
20 VCC = 14 V, RECVol f = 1 kHz VRI1in, PBOUTout 80 kHz LPF, 400 Hz HPF
40
60 0 10 20 30 DAC Step 40 50 60
Input Volume Gain vs. DAC Step (2) HA12167FB 35
Input Volume Gain (dB)
30
25
20
VCC = 14 V, PBVol f = 1 kHz VRI2in, PBOUTout 80 kHz LPF, 400 Hz HPF
15 0 10 20 30 DAC Step 40 50 60
50
HA12167FB/HA12169FB
Input Volume Gain vs. DAC Step (3) HA12169FB 40
20 Input Volume Gain (dB)
0
20 VCC = 14 V, RECVol f = 1 kHz VRI1in, PBOUTout 80 kHz LPF, 400 Hz HPF
40
60 0 10 20 30 DAC Step 40 50 60
Input Volume Gain vs. DAC Step (4) HA12167FB 35
Input Volume Gain (dB)
30
25
20
VCC = 14 V, PBVol f = 1 kHz VRI2in, PBOUTout 80 kHz LPF, 400 Hz HPF
15 0 10 20 30 DAC Step 40 50 60
51
HA12167FB/HA12169FB
Signal to Noise Ratio vs. DAC Step (1) 75
Signal to Noise Ratio S/N (dB)
DIN-AUDIO 80 CCIR-ARM
85 JIS-A
90 VCC = 14 V, RECVol VRI1in, PBOUTout 95 0 10 20 30 40 DAC Step 50 60
Signal to Noise Ratio vs. [. . . ] (Deck-A) Capstan motor control signal output pin. (Deck-B) Speed control of capstan motor output pin. Tape installation detection input signal pin. (Deck-A. ) Ta e class (HIGH) detection si nal in ut terminal. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE ONKYO TA-RW11
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual ONKYO TA-RW11 will begin.
