User manual ONKYO TX-8030

[. . . ] Contents Stereo Receiver Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . En-2 TX-8030 Instruction Manual Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . En-9 Enjoying Audio Sources. . . . . . En-17 Thank you for purchasing an Onkyo Stereo Receiver. Please read this manual thoroughly before making connections and plugging in the unit. Following the instructions in this manual will enable you to obtain optimum performance and listening enjoyment from your new Stereo Receiver. [. . . ] For example, to tune to 87. 5 (FM), press 8, 7, 5. CH/ALBUM +/– Number buttons DISPLAY You can store up to 40 of your favorite AM/FM radio stations as presets. Presetting FM/AM stations is performed by the receiver. 1 2 Tune to the AM/FM station that you want to store as a preset. The preset number flashes. 3 4 While the preset number flashes (about 8 seconds), use the PRESET []/[] buttons to select a preset from 1 through 40. Press the [MEMORY] button again to store the station or channel. The station or channel is stored and the preset number stops flashing. Repeat this procedure for all of your favorite AM/ FM radio stations. En-23 Listening to the Radio—Continued ■ Selecting Presets To select a preset, use the number buttons on the remote controller, the remote controller’s CH/ALBUM [+]/[–] buttons or the receiver’s PRESET / buttons. Shift*1: Switches the displayed character. (Left)/(Right): Select these to move the cursor within the Name input area. ■ Deleting Presets Back Space*2: “Back Space” moves the cursor backward one character space. In addition, “Back Space” deletes the character to the left of the cursor. OK: Specifies that the entry is complete. Tips: *1 You can also perform this on the remote controller by using >10. *2 By pressing [CLR] on the remote controller, you can delete all characters in the input. Notes: • This procedure can also be performed on the receiver by using [SETUP], TUNING[ ]/[], PRESET []/ [], and [ENTER]. • Press [RETURN] to return to the previous menu. ■ Switching the Display When receiving AM or FM, you can press the remote controller’s [DISPLAY] button to switch the display between the name you specified in Name Edit and the frequency that’s being received. 1 2 Select the preset that you want to delete. While holding down the [MEMORY] button, press the [TUNING MODE] button. The preset is deleted and its number disappears from the display. ■ Name Edit You can enter a custom name for radio preset for easy identification. When entered, the custom name will appear on the display. The custom name is edited using the character input screen. 1 2 3 4 Press the [SETUP] button on the remote controller. Use the arrow []/[] button to select “1. Source Setup, ” and then press [ENTER]. [. . . ] • Make sure the correct input is selected on your TV or the receiver. • Some versions of the iPod/iPhone do not output video. The receiver’s remote controller doesn’t control your iPod/iPhone • Make sure your iPod/iPhone is properly inserted in the Dock. If your iPod/iPhone is in a case, it may not connect properly to the Dock. [. . . ]