User manual ONKYO TX-DS696

[. . . ] Contents AV Receiver Before using 2 TX-DS696 Instruction Manual Facilities and connections 8 Setup and operation 22 Thank you for purchasing the Onkyo AV Receiver. Please read this manual thoroughly before making connections and plugging in the unit. Following the instructions in this manual will enable you to obtain optimum performance and listening enjoyment from your new AV Receiver. Please retain this manual for future reference. Remote controller 46 Appendix 61 WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN AVIS RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). [. . . ] If the station does not, this function will be ignored. To display the radio text, press the RT/PTY/TP button once. RT/PTY/TP 4. The TX-DS696 will scan until it reaches a station of the program type you selected. It will then stop briefly at that station before continuing on until it reaches the next station. Pressing the jog dial stops the PTY scan at that point. If you press the RT/PTY/ TP while "NONE" is displayed, "PTY ?" will appear. Press the jog dial when it reaches the station that you want to listen to. "Not Found" will appear when no RDS signal is being received from the station. DSP / MODE ADJ PUSH TO ENTER · If the current station you are listening to is not an RDS station, only the frequency of the station appears. · If "Waiting" appears on the display, more time is required to receive the RT information. When the information is received, the characters will scroll across the front display. · If "No Text Data" appears on the display, RT information is not available. · The display shows the frequency for 3 seconds and returns to program service name. DSP / MODE ADJ PUSH TO ENTER Performing a TP scan 1. Press the FM input source button. FM Performing a PTY scan 1. Press the FM input source button. FM 2. Press the RT/PTY/TP button three times. RT/PTY/TP 2. The current program type appears on the display. RT/PTY/TP "[TP]" will appear if the current station is broadcasting TP signals. This station will periodically broadcast traffic information. To find a different station, proceed to the next step. Also, if "TP" is displayed, proceed to the next step. The TX-DS696 will scan until it reaches a station broadcasting traffic information. If "Not Found" appears on the display, a TP station cannot be located. DSP / MODE ADJ DSP / MODE ADJ 3. Using the jog dial, select the PTY program type you desire. PUSH TO ENTER PUSH TO ENTER 28 Enjoying music or videos with the TX-DS696 MASTER VOLUME REC OUT ZONE 2 ZONE 2 LEVEL CH LEVEL MASTER VOLUME STANDBY/ON VOL MUTING DSP / MODE ADJ SETUP STANDBY RETURN POWER PUSH TO ENTER ON OFF DISPLAY DIMMER FM MODE PRESET MEMORY TUNING PRESET SMART SCAN NAVIGATOR BASS PHONES AUDIO SELECTOR TREBLE DVD VIDEO 1 VIDEO 2 VIDEO 3 VIDEO 4 TAPE FM AM PHONO CD VCR 1 VCR 2 AV RECEIVER TX-DS696 PHONES Input source buttons BASS TREBLE HOME THEATER CONTROLLER RC-440M INPUT SELECTOR buttons Though the TX-DS696 is often used to listen to the radio, it does not show you its true ability until it is used to play music or watch videos, DVDs, and the like. [. . . ] "Not available in Zone 2 mode" The operation is not allowed because the Zone 2 mode is turned on. "Only available with Dolby D" No setting other than Dolby Digital can be set. "Not available in this Listening mode" This operation cannot be performed in this listening mode. "Not available with this signal" This operation cannot be performed with this input signal. REMOTE CONTROLLER Front panel controls function but remote controller controls do not. [. . . ]