User manual ONKYO TX-NR1000E

[. . . ] Contents AV Receiver Getting Started 2 TX-NR1000 TX-NR5000E Instruction Manual Installation and Connections 18 Operations 48 Setup Menu 82 Using the Remote Controller Thank you for purchasing an Onkyo AV Receiver. Please read this manual thoroughly before making connections and plugging in the unit. Following the instructions in this manual will enable you to obtain optimum performance and listening enjoyment from your new AV Receiver. Please retain this manual for future reference. 124 Miscellaneous 143 En WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN AVIS RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). [. . . ] This setting can only be made when you set the "(Speaker B) Front L/R" setting to "Main B. " Not Used (default): Select this when not using. (Speaker B) Surr L/R Main A: Select this when using in main room A. Main B: Select this when using in main room B. This setting can only be made when you set the "(Speaker B) Front L/R" setting to "Main B. " Not Used (default): Select this when not using. (Speaker B) Surr Back Main A 2ch: Select this when connecting and using two surround back speakers in main room A. Main A 1ch (SBL): Select this when connecting and using a surround back speaker in main room A. Main B 2ch: If (Speaker B) Front L/R and Surr L/R are both set to "Main B, " you can select this item. Select this when connecting and using two surround back speakers in main room B. Main B 1ch (SBL): If (Speaker B) Front L/R and Surr L/R are both set to "Main B, " you can select this item. Select this when connecting and using a surround back speaker in main room B. Powered Zone 2: Select this when using in Zone 2. · If (Speaker A) Surr Back is set to "BTL for Front" or "Bi-Amp for Front, " this item is not displayed (Because, if "Powered Zone 2" is set, BTL connection and/or Bi-Amp connection are disabled). BTL for Front: This setting can be made only when you set the "(Speaker B) Front L/R" setting to "Main A" or "Main B. " Select this when using the front speaker in main room B by connecting the surround back channel to the speaker via BTL (See page 27). 88 Speaker/Output Setup--Continued Bi-Amp for Front: This setting can be made only when you set the "(Speaker B) Front L/R" setting to "Main A" or "Main B. " Select this when using the front speaker in main room B by connecting the front channel and the surround back channel to the speaker via Bi-Amp (See page 27). Not Used (default): Select this when not using surround back speakers. Note: If (Speaker A) Surr Back is set to "Main A 1ch, " you cannot select "Main A 2ch" and "Main B 2ch" here. (Speaker B) Subwoofer This setting can be made only when you set the "(Speaker B) Front L/R" setting to "Main A" or "Main B. " Main A: Select this when using a subwoofer in main room A. Main B: Select this when using a subwoofer in main room B. This setting can only be made when you set the "(Speaker B) Front L/R" setting to "Main B. " Not Used (default): Select this when not using a subwoofer. When the settings for Speaker Configuration are completed, the subsequent settings should be specified separately in main room A, main room B, and Zone 2. Speaker Crossover Sub-menu The settings in the Speaker Crossover sub-menu can be configured for both "Main A" and "Main B. " Front L/R, Center, Surr L/R, Surr Back Specify a threshold frequency in Hz for bass sounds from each speaker to be output from the subwoofer. When no subwoofer is used, (Speaker A) Front L/R is automatically set to "Full Band, " and bass sounds from each speaker are output from the front speakers. You can also set other speakers to "Full Band. " You can specify the frequency at 10 Hz increments between 40-150 Hz. When using a THX-certified speaker system, specify the setting of 80 Hz (THX) (default). [. . . ] "Not available with Dolby Headphone Off" · Doesn't work with the Dolby Headphone function off. "Not available with Dolby Headphone On" · Doesn't work with the Dolby Headphone function on. "Not available with zone2 out in Line out" · Operation not possible with "1-8. Zone 2 Out" set to "Line Out. " "Not available with zone3 out in Line out" · Operation not possible with "1-8. [. . . ]