User manual ONKYO TX-NR3010

[. . . ] Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. [. . . ] € If the “Powered Zone 2/3” setting is set to “Yes” and Zone 2 is turned on, this setting cannot be selected. € When the “Speakers Type(Front A)” setting is set to “Bi-Amp” or “Digital Crossover”, this setting cannot be selected if the “Powered Zone 2” setting is set to “Yes” and Zone 2 is turned on. € If the “Front High” or “Front Wide” setting is enabled (➔ page 67), this setting is fixed to “Manual”. – Dolby Volume Off On Dolby Volume automatically adjusts the difference in volume levels which can occur between different contents or source components, freeing the user from having to make volume adjustments. Also, by adjusting the frequency balance according to the playback volume, it recreates the original source audio. Dolby Volume therefore provides comfortable listening, effectively controlling the volume level difference without unnatural changes in volume or sound quality to recreate the balance and nuance of the source audio. note • When the “Dolby Volume” setting is set to “On” , “Dynamic EQ” and “Dynamic Volume” will be set to “Off”. € If you would like to use Dolby Volume in THX listening modes, set the “Loudness Plus” and “Preserve THX Settings” settings to “Off” and “No”, respectively. € When “Dolby Volume” is set to “On”, the Late Night function cannot be set. – TrueHD Loudness Management Off On This setting specifies whether or not to apply the Late Night processing on a Dolby TrueHD source. Note • When this setting is set to “Off”, the Late Night function for Dolby TrueHD sources is automatically fixed to “Off”. € When this setting is set to “Off”, the Dialogue Normalization information is not available for Dolby TrueHD sources. This setting affects volume the most, causing all sounds to be of equal loudness. €Volume Leveler” maintains the perceived loudness of all contents, coming from different channels or input sources. Note • If the “Dolby Volume” setting is set to “Off”, this setting cannot be selected. en-73 Advanced Operations ■ Half Mode Off On The Half Mode parameter turns Dolby Volume Half Mode processing on and off. In off mode, Dolby Volume applies a bass and treble attenuation to the audio when the system gain exceeds reference level. This enables a more perceptually flat listening experience as human ears are more sensitive to bass and treble at higher levels. Some listeners however, prefer to have more bass and treble performance at higher gain levels. Note • If the “Dolby Volume” setting is set to “Off”, this setting cannot be selected. € During Half Mode on playback, Dolby Volume does not apply a bass and treble attenuation when the system volume exceeds reference level, thereby boosting perception of high and low frequencies. Dialogue Normalization Dialogue Normalization (DialogNorm) is a feature of Dolby Digital, which is used to keep the programs at the same average listening level so the user does not have to change the volume control between Dolby Digital, Dolby Digital Plus and Dolby TrueHD programs. [. . . ] Personal Station: You can play tracks from personalized station (“Your Library”, “Your Neighbourhood” and “Your Recommendations”). ■ Using scrobbling control Use q/w to select “Enable” , and then press ENTER. * Internet radio services provided by a third party may be terminated with or without notice. Internet radio services may not be available in some areas. [. . . ]