User manual ONKYO TX-NR414

[. . . ] Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. [. . . ] For example, when you enter a domain name such as www. Com in your Web browser, before accessing the site, your browser uses DNS to translate this into an IP address, in this case 63. – LipSync Off On This function allows the AV receiver to automatically correct any delay between the video and the audio, based on the data from the connected monitor. Note • This function works only if your HDMI-compatible TV supports HDMI Lip Sync. After changing the settings of the “HDMI Ctrl (RIHD)”, “HDMI Through” or “Audio Return Ch”, turn off the power on all connected pieces of equipment and then turn them on again. Refer to the user’s manuals for all connected pieces of equipment. En-50 Advanced Operations ■ DHCP Enable Disable This setting determines whether or not the AV receiver uses DHCP to automatically configure its IP Address, Subnet Mask, Gateway, and DNS Server settings. Note • If you select “Disable”, you must configure the “IP Address”, “Subnet Mask”, “Gateway”, and “DNS Server” settings yourself. ■ Network Standby On Off This setting enables or disables control over the network. When enabled, the NET indicator will be dimly-lit while the AV receiver is in standby mode. Note that the indicator may not light under certain conditions (➔ page 42). 255” Enter a static IP address provided by your Internet Service Provider (ISP). – Subnet Mask Enter the subnet mask address provided by your ISP (typically 255. – Gateway Enter the gateway address provided by your ISP. – DNS Server Enter the DNS server address provided by your ISP. – Proxy URL To use a Web proxy, enter its URL here. – Proxy Port If you’re using a Web proxy, enter a proxy port number here. – Update Notice Enable Disable When this setting is enabled, you will be notified if a firmware update via network is available. Note • Selecting “Never Remind me” on the notification window will switch this setting to “Disable” (➔ page 19). € For details on the update notification, see “If the “Update New F/W” window appears. En-51 Advanced Operations Zone 2 In addition to the main listening room, you can also enjoy playback in another room, or as we call Zone 2. And, you can select a different source for each room. [. . . ] Personal Station: You can play tracks from personalized station (“Your Library”, “Your Neighbourhood” and “Your Recommendations”). ■ Using scrobbling control Use q/w to select “Enable” , and then press ENTER. * Internet radio services provided by a third party may be terminated with or without notice. Internet radio services may not be available in some areas. [. . . ]