User manual ONKYO TX-NR515

[. . . ] Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. [. . . ] Direct: Does not adjust picture quality (does not change resolution). The video coming from an analog input and output by HDMI output(s) is processed in the same way as “Through”. With “Picture Mode”, you can change the following settings to be suitable for the movie or game screen by one operation; “Game Mode”, “Film Mode”, “Edge Enhancement”, “Noise Reduction”, “Brightness”, “Contrast”, “Hue”, “Saturation” or “Color Temperature”. , game console), select the corresponding input source and set the “Game Mode” setting to “On”. The delay will decrease but in return the picture quality will become poor. – Film Mode*2*4 Video: “Film Mode” detection is not applied and the input signal is handled as a video source. auto: Detects whether the input signal is a video or a movie. If it is a movie, the appropriate conversion is applied. The AV receiver will adjust to the picture source, automatically converting it to the appropriate progressive signal and reproducing the natural quality of the original picture. – Edge Enhancement*2*4*5 Off Low Mid High With this setting, you can make the picture appear sharper. – Noise Reduction*2*4*5 Off Low Mid High With this setting, you can reduce noise appearing on the screen. Zoom: Wide Zoom: Auto: According to the input signals and monitor output setting, the AV receiver automatically selects the “4:3”, “Full”, “Zoom” or “Wide Zoom” mode. See “Monitor Out” for details on the monitor output setting (➔ page 50). En-58 Advanced Operations ■ Brightness*1*2*4 –50 to 0 to +50 With this setting, you can adjust the picture brightness. – Contrast*1*2*4 –50 to 0 to +50 With this setting, you can adjust contrast. – Hue*1*2*4 –50 to 0 to +50 With this setting, you can adjust the color hue between “–50” and “+50”. – Saturation*1*2*4 –50 to 0 to +50 With this setting, you can adjust saturation. – Color Temperature*2*4 Warm Normal Cool With this setting, you can adjust the color temperature. Note • “Picture Adjust” cannot be used when: – The NET input selector is selected, or – “Monitor Out” is set to “Sub”. *1 This procedure can also be performed on the remote controller by using the Quick Setup (➔ page 45). *2 When the “Picture Mode” setting is set to anything other than “Custom”, this setting cannot be used. *3 If the “Resolution” setting is set to “4K Upscaling” (➔ page 50), this setting is fixed at “Off”. [. . . ] Personal Station: You can play tracks from personalized station (“Your Library”, “Your Neighbourhood” and “Your Recommendations”). ■ Using scrobbling control Use q/w to select “Enable” , and then press ENTER. * Internet radio services provided by a third party may be terminated with or without notice. Internet radio services may not be available in some areas. [. . . ]