User manual ONKYO TX-NR801

[. . . ] Contents AV Receiver Before using 2 TX-NR801 TX-NR801E Instruction Manual Facilities and connections 8 Setting up your TX-NR801/TX-NR801E 28 Enjoying Music and Movies Useful Settings (Basic) Useful Settings (Advanced) 39 52 56 Making full use of your TX-NR801/TX-NR801E 64 Thank you for purchasing an Onkyo AV Receiver. Please read this manual thoroughly before making connections and plugging in the unit. Following the instructions in this manual will enable you to obtain optimum performance and listening enjoyment from your new AV Receiver. Please retain this manual for future reference. Remote Controller 80 Appendix 90 En WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN AVIS RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). [. . . ] RT: Radio Text When an RDS station broadcasting RT information is selected, the text information received from the station is displayed. PTY: Program Type When an RDS station broadcasting PTY information is selected, the station type (classification) is displayed. TP: Traffic Program When an RDS station broadcasting TP information is selected, traffic information will be broadcasted periodically. Notes: · In some cases, the characters displayed on the display of the TX-NR801E may not be exactly the same as the ones broadcast by the radio station. Also, unusual characters may appear on the display if the TX-NR801E receives characters that cannot be displayed correctly. · When an RDS station broadcasting PS information is selected, the name of the station is displayed instead of the frequency. 48 Listening to RDS Broadcasts (European models only)--Continued RT/PTY/TP TUNER ENTER SETUP 4 ENTER TUNING ENTER RETURN PRESET DIRECT / PURE AUDIO STEREO SURROUND THX DSP MEMORY FM MODE A-FORM LISTENING MODE MEMORY PRESET / Press the ENTER button. The TX-NR801E will scan until it reaches a station of the program type you selected. It will then stop briefly at that station before continuing on until it reaches the next station. Pressing the ENTER button stops the PTY scan at that point. If you press the RT/PTY/TP while "NONE" is displayed, "PTY ?" will appear. Press the ENTER button when it reaches the station that you want to listen to. "Not Found" will appear when no RDS signal is being received from the station. Displaying Radio Text (RT) If the station you are currently tuned into is broadcasting RT signals, they will be displayed in the front display on the TX-NR801E. If the station does not, this function will be ignored. RT/PTY/TP 5 ENTER To display the radio text, press the RT/PTY/TP button once. Performing a TP Scan 1 · If the current station you are listening to is not an RDS station, only the frequency of the station will appear. · If "Waiting" appears on the display, more time is required to receive the RT information. When the information is received, the characters will scroll across the front display. · If "No Text Data" appears on the display, RT information is not available. · The display shows the frequency for 3 seconds and returns to program service name. TUNER Press the TUNER input source button. 2 RT/PTY/TP Press the RT/PTY/TP button three times. Performing a PTY Scan 1 TUNER Press the TUNER input source button and select the FM input source. "[TP]" will appear if the current station is broadcasting TP signals. This station will periodically broadcast traffic information. To find a different station, proceed to the next step. Also, if "TP" is displayed, proceed to the next step. 3 ENTER 2 RT/PTY/TP Press the RT/PTY/TP button twice. The current program type appears on the display. Press the ENTER button. The TX-NR801E will scan until it reaches a station broadcasting traffic information. [. . . ] All rights reserved. D0308-1 97 Net Audio Quick Setup Guide Before connecting the AV Receiver Before connecting the AV Receiver, connect the cable/DSL modem, broadband router and PC according to the figure on the right, and make sure that you can browse Web pages through your broadband connection. Note: · Some cable/DSL modems incorporate the broadband router function. · Set to "On" the DHCP function on the broadband router (Usually, the DHCP function is set to "On" by default). · For details on settings, refer to individual manuals for the PC, cable/DSL modem, and broadband router. [. . . ]