User manual ONKYO TX-SR502E

[. . . ] Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 AV Receiver TX-SR502 TX-SR502E Instruction Manual Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Turning On & First Time Setup. . . . . 31 Basic Operation Playing your AV components . . . . . . . [. . . ] Small: Select if the front speakers are small. Large: Select if the front speakers are large. Note: · If the Subwoofer setting in step 3 is set to No, this setting is fixed at Large and does not appear. Use the Down[ ] button to select "Center, " and then use the Left and Right [ ]/[ ] buttons to select Small, Large, or None. Small: Select if the center speaker is small. Large: Select if the center speaker is large. None: Select if no center speaker is connected. Note: · If the Front setting in step 4 is set to Small, the Large option cannot be selected. Use the Down[ ] button to select "Surround, " and then use the Left and Right [ ]/[ ] buttons to select Small, Large, or None. Small: Select if the surround left and right speakers are small. Large: Select if the surround left and right speakers are large. None: Select if no surround left and right speakers are connected. Note: · If the Front setting in step 4 is set to Small, the Large option cannot be selected. 4 ENTER ON STANDBY I TV INPUT V1 V2 V3 1 DVD 2 MULTI CH 3 6 TUNER + TV CH 4 CD 5 TAPE - 7 +10 --/--TONE 8 0 9 T V VOL CLEAR ENTER _ TUNER/ TAPE + MD AMP REMOTE MODE DVD CD CDR AMP TV VCR CABLE SAT DIMMER TV INPUT P TO M SLEEP ENU MEN U ENTER PREV CH + CH DISC ENTER VOL EX IT RE E GUID TUR N UP SET SETUP MUTING 5 ENTER DISPLAY REC SP A SP B RANDOM AUDIO SURR SUBTITLE ALL ST ANGLE LAST M STEREO REPEAT A-B DIRECT SEARCH DSP MEMORY DSP ENTER 1 AMP Press the [AMP] button followed by the [SETUP] button. 6 2 ENTER Use the Up and Down [ ]/[ ] buttons to select "1. SP Config, " and then press the [ENTER] button. ENTER ENTER ENTER 32 First Time Setup--Continued 7 ENTER ENTER Use the Down [ ] button to select "Surr Back, " and use the Left and Right [ ]/[ ] buttons to select Small, Large, or None. Small: Select if the surround back speaker is small. Large: Select if the surround back speaker is large. None: Select if no surround back speaker is connected. Notes: · If the Surround setting in step 6 is set to None, this setting does not appear. · If the Surround setting in step 6 is set to Small, the Large option cannot be selected. Setup closes. Changing the TAPE/MD/CDR Display If you connect an -compatible Onkyo MiniDisc recorder or CD recorder to the TAPE IN/OUT sockets, for to work properly, you must change this setting. This setting can only be changed on the TX-SR502/ TX-SR502E. MASTER VOLUME TUNING STANDBY/ON ENTER PRESET STANDBY SETUP RETURN A SPEAKERS B TONE STEREO LISTENING MODE DISPLAY DIGITAL INPUT MEMORY TUNING MODE CLEAR PHONES VIDEO 3 INPUT MULTI CH DVD VIDEO 1 VIDEO 2 VIDEO 3 TAPE TUNER CD S VIDEO VIDEO L AUDIO R VCR TAPE 8 1 TAPE Press the [TAPE] input selector button so that "TAPE" appears on the display. To test that all of your speakers are working properly, press the remote controller's [TEST TONE] button. The test tone will be output by each speaker in turn and the name of each speaker will appear on the display. [. . . ] Or, your FM antenna is in the wrong position or pointing in the wrong direction. Or, the station's signal strength is poor. Tuner Reception is hindered by a crackling noise? Interference is being caused by fluorescent lights being turned on or off or by passing cars. AM reception is hindered by a buzzing noise, especially at night or with weak signals?AM reception is hindered by a high-pitched noise? Interference caused by electrical equipment, including fluorescent lights. Interference caused by your TV. The tuner presets no longer work? The power cord has not been connected to a wall outlet, or the power has been turned off for an extended period. From the VIDEO 1 OUT, you're trying to record the signal being fed into the VIDEO 1 IN, or from the TAPE OUT, you're trying to record the signal being fed into the TAPE IN. Recording Sound can be heard from the speakers, but it cannot be recorded? You're playing Dolby Digital or DTS source material. [. . . ]