User manual ONKYO TX-SR508

[. . . ] Contents AV Receiver Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 TX-SR508 Instruction Manual Connections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Turning On & Basic Operations . . . . . . 20 Advanced Operations . . . . . . . . . . . . . . . . . 34 Controlling iPod & Other Components. . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 Others. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 Thank you for purchasing an Onkyo AV Receiver. Please read this manual thoroughly before making connections and plugging in the unit. Following the instructions in this manual will enable you to obtain optimum performance and listening enjoyment from your new AV Receiver. Please retain this manual for future reference. En WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN AVIS RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). [. . . ] For speakers with a cone diameter larger than 6-1/2 inches (16 cm), specify Large (full band). For those with a Cone diameter smaller diameter, specify Small (default crossover 100Hz). The crossover frequency can be changed in the "Crossover (Crossover Frequency)" ( 36). Note *4 *5 *6 *7 *8 If the "Front" setting is set to "Small", the "Large" option cannot be selected. If the "Surround" setting is set to "None", this setting cannot be selected. If the "SurrBk/FrontHigh" setting is set to "Front High" ( 40), this setting cannot be selected. If the "Speakers Type" setting is set to "Bi-AMP" ( 40), this setting cannot be selected. If the "Front High/Zone2" setting is set to "Zone2" and "SurrBk/FrontHigh" setting is set to "SurrBack" ( 40), this setting cannot be selected. If the "Surround" setting is set to "Small", the "Large" option cannot be selected. For "Front High", the default is "None". If the "Front High/Zone2" setting is set to "Zone2", this setting cannot be selected. SurrBack Ch 1ch: Select if only one surround back speaker is connected. 2ch: Select if two (left and right) surround back speakers are connected. Note · If the "SurrBack" setting is set to "None", this setting cannot be selected. These settings are disabled when: · a pair of headphones is connected, or · the "Audio TV OUT" setting is set to "On" ( 41) and an input selector other than HDMI is selected. Subwoofer Yes: Select if a subwoofer is connected. No: Select if no subwoofer is connected. Front Small: Large: Select based on the cone diameter. Note · If the "Subwoofer" setting is set to "No", this setting is fixed at "Large" and does not appear. Crossover (Crossover Frequency) This setting is advantageous for the speakers that you specified as "Small" in the "Sp Config (Speaker Configuration)" ( 36). To get the best bass performance from your speaker system, you need to set the crossover frequency according to the size and frequency response of your speakers. 40Hz, 50Hz, 60Hz, 80Hz, 100Hz, 120Hz, 150Hz, 200Hz: Use the diameter of the smallest speaker in your system when choosing the crossover frequency. Speaker cone diameter Over 8 in. (9 cm) * Crossover frequency 40/50/60 Hz* 80 Hz 100 Hz 120 Hz 150/200 Hz* Choose the setting suitable for the speaker. Note · For a more accurate setting, look up the frequency response in the manuals supplied with your speakers and set accordingly. · Choose a higher crossover frequency if you want more sound from your subwoofer. En 36 Double Bass This setting is not set automatically by Audyssey 2EQ Room Correction and Speaker Setup function ( 23). Note · This function can be set only if the "Subwoofer" setting is set to "Yes", and the "Front" setting is set to "Large" ( 36). Level Cal (Level Calibration) Menu Level Cal This setting is set automatically by Audyssey 2EQ® Room Correction and Speaker Setup function. ( 23) Here you can adjust the level of each speaker with the built-in test tone so that the volume of each speaker is the same at the listening position. Left, FrontHigh Left, Center*1, FrontHigh Right, Right, Surround Right, SurrBack Right, SurrBack Left, Surround Left ­12 dB to 0 dB to +12 dB in 1 dB step. Subwoofer*1 ­15 dB to 0 dB to +12 dB in 1 dB step. Note · Speakers that you set to "No" or "None" in the "Sp Config (Speaker Configuration)" ( 36) cannot be selected. · The speakers cannot be calibrated while a pair of headphones is connected or the AV receiver is muted or "Audio TV OUT" setting is set to "On" ( 41). [. . . ] Start playback of the Blu-ray Disc/DVD player/ recorder, and confirm the following. · The power of the AV receiver is turned on automatically, and input with the Blu-ray Disc/DVD player/recorder connected is selected. · The power of the TV is turned on automatically, and input with the AV receiver connected is selected. Following the operating instructions of the TV, select "Use the TV speakers" from the menu screen of the TV, and confirm that the audio is output from the speakers of the TV, and not from the speakers connected to the AV receiver. [. . . ]