User manual ONKYO TX-SR701E

[. . . ] Contents AV Receiver Before using 2 TX-SR701/701E TX-SR601/601E Facilities and connections 8 Instruction Manual Setup and operation 31 Thank you for purchasing the Onkyo AV Receiver. Please read this manual thoroughly before making connections and plugging in the unit. Following the instructions in this manual will enable you to obtain optimum performance and listening enjoyment from your new AV Receiver. Please retain this manual for future reference. Remote controller 63 Appendix 75 En WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN AVIS RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). [. . . ] If you press the RT/PTY/TP while "NONE" is displayed, "PTY ?" will appear. Press the ENTER button when it reaches the station to which you want to listen. "Not Found" will appear when no RDS signal is being received from the station. Performing a TP scan 1. Press the TUNER input source button and select the FM input source. TUNER Performing a PTY scan 1. Press the TUNER input source button and select the FM input source. The current program type appears on the display. TUNER 2. Press the RT/PTY/TP button three times. 3. Using the / buttons, select the PTY program type you desire. PRESET TUNING "[TP]" will appear if the current station is broadcasting TP signals. This station will periodically broadcast traffic information. To find a different station, proceed to the next step. Also, if "TP" is displayed, proceed to the next step. The TX-SR701E/601E will scan until it reaches a station broadcasting traffic information. If "Not Found" appears on the display, a TP station cannot be located. 40 Selecting an Audio Component TX-SR701/701E RCVR MODE AUDIO ADJUST MASTER VOLUME SETUP RETURN STANDBY/ON TUNING VOL PRESET POWER STANDBY ON OFF LISTENING MODE SURROUND THX REC OUT ZONE 2 OFF LEVEL DISPLAY RT/PTY/TP STEREO DSP MEMORY FM MODE ENTER CLEAR PHONES DIRECT/ PURE AUDIO PURE AUDIO AUDIO SELECTOR DVD VIDEO 1 VIDEO 2 VIDEO 3 VIDEO 4 TAPE TUNER CD PHONO VIDEO 4 INPUT VCR 1 VCR 2 DIGITAL S VIDEO VIDEO L AUDIO R INPUT SELECTOR buttons MASTER VOLUME Input source buttons Basic operation If you want to perform these operations using the remote controller, first press the RCVR MODE button. Press the desired input source. TX-SR701/701E DVD VIDEO 1 VIDEO 2 VIDEO 3 VIDEO 4 TAPE TUNER CD PHONO VCR 1 VCR 2 · For information about selecting the listening mode, see pages 46-51. · You can set the sound quality using the Audio Adjust menu. (See page 57 for more information. ) If no audio output is heard from the digital source (DVD, CD, etc. ) you have selected, see "Digital Input" on page 52. TX-SR601/601E DVD VIDEO 1 VIDEO 2 VIDEO 3 VIDEO 4 TAPE TUNER CD VCR 1 VCR 2 Remote controller The selected source name appears on the display. See "Enjoying DVD multichannel audio playback" (see page 44) when a DVD player with a 5. 1-channel input port is connected to the TXSR701/701E/601/601E. Start playing the selected input source. Follow the operating instructions for the source device. Adjust the volume to an appropriate level. TX-SR701/701E/601/601E MASTER VOLUME Remote controller Adjusting the main volume adjusts the volume level of all the speakers connected to the TX-SR701/701E/601/601E together. If headphones are connected, this also adjusts the volume heard from the headphone speakers. To adjust the volume, either press the VOL buttons on the remote controller or turn the MASTER VOLUME dial. [. . . ] "Not available in Zone 2 mode" Setting not allowed because the Zone 2 mode is turned on. "Only available with Dolby D" No setting other than Dolby Digital can be set. "Not available in this Listening mode" Will not work with the current listening mode. "Not available with this signal" The listening mode cannot be selected with the current input source. [. . . ]