User manual ONKYO TX-SR707

[. . . ] Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 AV Receiver Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 TX-SR707 Turning On & First Time Setup . . . . . 40 Basic Operations. . . . . . . . . . . . . . . . . . . . . . . . . 56 Using the Listening Modes . . . . . . . . 69 Advanced Setup . . . . . . . . . . . . . . . . . . . . . . . . . . 79 Zone 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102 Controlling Other Components . . . 108 Instruction Manual Thank you for purchasing an Onkyo AV Receiver. Please read this manual thoroughly before making connections and plugging in the unit. Following the instructions in this manual will enable you to obtain optimum performance and listening enjoyment from your new AV Receiver. Please retain this manual for future reference. Others. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121 En WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN AVIS RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). [. . . ] · While the listening mode is set to Pure Audio, no image is provided because the power is turned off for the video circuit. If you want to make recordings, select other listening mode. Recording Separate AV Sources Here you can record audio and video from completely separate sources, allowing you to overdub audio onto your video recordings. This function takes advantage of the fact that when an audio-only input source (i. e. , TV/ TAPE, TUNER, CD or PHONO) is selected, the video input source remains unchanged. In the following example, audio from the CD player connected to the CD IN, and video from the camcorder connected to the AUX INPUT VIDEO jack are recorded by the VCR connected to the VCR/DVR OUT jacks. Camcorder AV Recording Audio sources can be recorded to a recorder (e. g. , cassette deck, CDR, MD) connected to the TV/TAPE OUT jack. Video sources can be recorded to a video recorder (e. g. , VCR, DVD recorder) connected to the VCR/DVR OUT jack. See pages 26 to 39 for hookup information. video signal audio signal 1 Use the input selector buttons to select the source that you want to record. You can watch the source while recording. The AV receiver's MASTER VOLUME control has no effect on recording. 2 3 On your recorder, start recording. On the source component, start playback. If you select another input source during recording, that input source will be recorded. CD player VCR 1 2 3 4 5 Prepare the camcorder and CD player for playback. This selects the CD player as the audio source, but leaves the camcorder as the video source. Start recording on the VCR and start playback on the camcorder and CD player. The video from the camcorder and the audio from the CD player are recorded by the VCR. 68 Using the Listening Modes Selecting Listening Modes See "About the Listening Modes" on page 76 for detailed information about the listening modes. · The Dolby Digital and DTS listening modes can only be selected if your DVD player is connected to the AV receiver with a digital audio connection (coaxial, optical, or HDMI). · The listening modes you can select depend on the format of the input signal. To check the format, see "Displaying Source Information" on page 57. · While a pair of headphones is connected, you can only select the Pure Audio, Mono, Direct, DTS Surround Sensation, or Stereo listening mode. Selecting with the Remote Controller MOVIE/TV MUSIC THX GAME Selecting on the AV receiver LISTENING MODE Remote controller Press the [RECEIVER] button, and then press the LISTENING MODE button repeatedly to select the listening mode. PURE AUDIO LISTENING MODE buttons [MOVIE/TV] button This button selects the listening modes intended for use with movies and TV. [MUSIC] button This button selects the listening modes intended for use with music. [GAME] button This button selects the listening modes intended for use with video games. [THX] button This button selects the THX listening modes. [PURE AUDIO] button This button selects the Pure Audio listening mode. When this mode is selected, the AV receiver's display is turned off and only video signals input through HDMI IN can be output. Pressing this button again will select the previous listening mode. [. . . ] Use the Left and Right [ ]/[ ] buttons to change the setting. Press the input selector button for the input source that you want to set when you've finished. · Video Attenuation This setting can be made for the DVD/BD, VCR/ DVR, CBL/SAT, GAME, AUX, or COMPONENT VIDEO input. (You need to assign the input source for COMPONENT VIDEO input. ) If you have a games console connected to the S-Video, composite and component video input, and the picture isn't very clear, you can attenuate the gain. [. . . ]