User manual ONKYO TX-SR803E

[. . . ] Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 AV Receiver TX-SR803/803E TX-SR703/703E TX-SR8370 Instruction Manual Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Turning On & First Time Setup. . . . . 39 Basic Operation Playing your AV components . . . . . . . [. . . ] Please wait. ENTER 3 ENTER The signal is too weak. Check the antenna connection and reposition it for the best reception. Use the Up and Down [ ]/[ ] buttons to select "3. XM Antenna Aiming, " and then press [ENTER]. 4. Input Setup -------TUNER------------1. Delay 2. Character Edit 3. XM Antenna Aiming The AV receiver is tuning or decoding audio or text data. Please wait. ENTER The XM channel you selected is not currently broadcasting. Select another channel. 55 Listening to the Radio--Continued Presetting AM/FM Stations and XM Channels Selecting Presets ON STANDBY 1 I TV INPUT MASTER VOLUME 2, 4 STANDBY/ON STANDBY ZONE 2 POWER 3 MASTER VOLUME V1 STANDBY/ON STANDBY ZONE 2 V2 V3 1 4 MULTI CH DVD VIDEO 1 VIDEO 2 2 MULTI CH 3 DVD + T V CH POWER ON OFF 5 VIDEO 3 VIDEO 4 TAPE PHONO 6 TAPE TUNER TUNER CD DISPLAY PURE AUDIO CD 7 PHONES ZONE 2 OFF TONE STEREO DIMMER MEMORY 8 TUNING MODE SETUP 9 T V VOL RETURN ENTER SETUP MIC VIDEO 4 INPUT ON OFF ZONE 2 LEVEL LISTENING MODE +10 CLEAR 0 PRESET CLEAR TUNING PRESET DIGITAL S VIDEO VIDEO L AUDIO R PURE AUDIO MULTI CH DVD VIDEO 1 VIDEO 2 VIDEO 3 VIDEO 4 PHONO TAPE TUNER CD DISPLAY 11 --/ --- 10 INPUT SELECTOR MACRO 1 2 12 PHONES ZONE 2 OFF TONE STEREO DIMMER MEMORY TUNING MODE VIDEO 4 INPUT SETUP RETURN ENTER SETUP MIC 3 LISTENING MODE ZONE 2 LEVEL CLEAR PRESET TUNING PRESET DIGITAL S VIDEO VIDEO L AUDIO R REMOTE MODE RECEIVER TAPE/AMP TV VCR CABLE CDR SAT MD DVD CD HDD You can store a combination of up to 40 of your favorite AM/FM radio stations and XM channels as presets. DIMMER TO EN PM SLEEP U MEN U + 1 2 Tune into the AM/FM station or XM channel that you want to store as a preset. The MEMORY indicator appears and the preset number flashes. 1 CH DISC ALBUM ENTER VOL PREV CH DISPLAY RE TU R N SE T UP MUTING MEMORY REC PLAYLIST RANDOM 1 PRESET PRESET To select a preset, use the PRESET [ ]/[ ] buttons, or the remote controller's CH [+/­] button. + 3 PRESET PRESET While the MEMORY indicator is displayed (about 8 seconds), use the PRESET [ ]/[ ] buttons to select a preset from 1 through 40. CH DISC ALBUM - 4 MEMORY Press the [MEMORY] button again to store the station or channel. The station or channel is stored and the preset number stops flashing. Repeat this procedure for all of your favorite AM/FM radio stations and XM channels. Deleting Presets 2 MASTER VOLUME STANDBY/ON STANDBY ZONE 2 POWER ON OFF PURE AUDIO MULTI CH DVD VIDEO 1 VIDEO 2 VIDEO 3 VIDEO 4 PHONO TAPE TUNER CD DISPLAY PHONES ZONE 2 OFF TONE STEREO DIMMER MEMORY TUNING MODE VIDEO 4 INPUT SETUP RETURN ENTER SETUP MIC LISTENING MODE ZONE 2 LEVEL CLEAR PRESET TUNING PRESET DIGITAL S VIDEO VIDEO L AUDIO R 1 2 TUNING MEMORY MODE CLEAR Select the preset that you want to delete. While holding down the [MEMORY] button, press the [TUNING MODE] button. The preset is deleted and its number disappears from the display. 56 Using the Multichannel DVD Input Multichannel DVD Input Settings 1 ON STANDBY I RECEIVER TV INPUT V1 V2 V3 1 V4 2 MULTI CH 3 DVD + T V CH MULTI CH 4 CD 5 TAPE 6 TUNER - While the DVD input is selected, press the [RECEIVER] REMOTE MODE button, followed by the [SETUP] button. The main menu appears onscreen. 7 PHONO 8 0 MACRO 9 T V VOL CLEAR 12 +10 11 --/--- 10 INPUT SELECTOR 1 2 3 ZONE2 2 ENTER REMOTE MODE RECEIVER RECEIVER TAPE/AMP TV DVD CD HDD Use the Up and Down [ ]/[ ] buttons to select "4. Input Setup, " and then press [ENTER]. Use the Up and Down [ ]/[ ] buttons to select "3. The Multichannel Analog menu appears. 4-3. MULTICH -----------DVD---------3. XM Antenna Aiming a. Input Channel:5. 1ch b. Subwoofer Sensitivity : 0dB VCR CABLE CDR SAT MD DIMMER P TO MEN U MEN U SLEEP ENTER + CH DISC ALBUM ENTER VOL PREV CH DISPLAY RE TU R ENTER N SE T UP SETUP MUTING REC PLAYLIST RANDOM LISTENING MODE STEREO REPEAT PURE A SURR AUDIO DIRECT SUBTITLE PLAY MODE THX ALLST TEST TONE CH SEL LEVEL LEVEL OPEN/CLOSE VIDEO OFF L NIGHT Re-EQ 3 ENTER Using the Multichannel DVD Input The multichannel DVD input is for connecting a component with a 5. 1/7. 1-channel analog audio output, such as a DVD player, DVD-Audio/SACD-capable player, or an MPEG decoder. See page 28 for hookup information. RECEIVER Use the Up and Down [ ]/[ ] buttons to select the settings, and use the Left and Right [ ]/[ ] buttons to change them. Setup closes. 4 MULTI CH 5 Press the [RECEIVER] REMOTE MODE button, followed by the [MULTI CH] button. The MULTI CH indicator appears on the display. Audio from the multichannel DVD input will now be used for the DVD input source. MULTI CH indicator Input Channel If you've connected a 7. 1-channel audio output to the multichannel DVD input, select 7. 1ch. If you've connected a 5. 1-channel audio output, select 5. 1ch. Subwoofer Sensitivity Some DVD players output the LFE channel from their subwoofer output at 15 dB higher than normal. You can change the subwoofer sensitivity to match your DVD player. Note that this setting only affects signals connected to the SUBWOOFER input jack of the multichannel DVD input. [. . . ] For other models, set the AV receiver to Standby and the POWER switch to OFF before disconnect the power cord. 94 Specification Amplifier Section Power Output TX-SR803/803E: 2 channels driven: General Power Supply North American: AC 120 V, 60 Hz Australian and European: AC 230-240 V, 50 Hz Others: AC 120/220-240 V, 50/60 Hz AC 230-240 V, 50Hz AC 220-230 V, 50/60 Hz North American: 7. 5 A Others: 680 W North American: 0. 1 W Australian and European: 0. 2 W Others: 0. 5 W 435 × 173. 5 × 430 mm 17-1/8" × 6-13/16" × 16-15/16" North American: 13. 3 kg 29. 3 lbs. Others: 13. 3 kg 29. 3 lbs. North American: 105 W + 105 W (8 , 20 Hz­20 kHz, FTC) European: 140 W + 140 W (6 , 1 kHz, DIN) Others: 170 W + 170 W (6 , 1 kHz, JEITA) Power Consumption Standby Power Consumption Dimensions (W × H × D) Weight TX-SR703/703E/8370: 2 channels driven: North American: 100 W + 100 W (8 , 20 Hz­20 kHz, FTC) European: 130 W + 130 W (6 , 1 kHz, DIN) Others: 160 W + 160 W (6 , 1 kHz, JEITA) Dynamic Power TX-SR803/803E: 240 W + 240 W (3 , Front) 180 W + 180 W (4 , Front) 125 W + 125 W (8 , Front) TX-SR703/703E/8370: 230 W + 230 W (3 , Front) 170 W + 170 W (4 , Front) 115 W + 115 W (8 , Front) THD (Total Harmonic Distortion) 0. 08% (Power Rated) Damping Factor 60 (Front, 1 kHz, 8) Input Sensitivity and Impedance 200 mV/ 47 k (LINE) 2. 5 mV/47 k (PHONO MM) Output Level and Impedance 200 mV/ 470 (REC OUT) Phono Overload 70 mV (MM 1 kHz, 0. 5%) Frequency Response 10 Hz­100 kHz/ +1 dB-3 dB (LINE) Tone Control ±10 dB, 50 Hz (BASS) ±10 dB, 20 kHz (TREBLE) Signal to Noise Ratio 106 dB (LINE, IHF-A) 80 dB (PHONO, IHF-A) Speaker Impedance 4­ or 6­ Video Inputs HDMI Component S-Video Composite TX-SR803/803E: IN1, IN2 IN1, IN2, IN3 DVD, VIDEO1, VIDEO2, VIDEO3, VIDEO4 DVD, VIDEO1, VIDEO2, VIDEO3, VIDEO4 Video Outputs HDMI Component S-Video Composite TX-SR803/803E: OUT OUT MONITOR OUT, VIDEO1, VIDEO2 MONITOR OUT, VIDEO1, VIDEO2 Audio Inputs Digital Inputs Analog Inputs Multichannel Input Optical: 5 (1 on Front Panel) Coaxial: 2 DVD (MULTICHANNEL), VIDEO1, VIDEO2, VIDEO3, VIDEO4, TAPE, CD, PHONO 7. 1 ch (DVD) Video Section Input Sensitivity/Output Level and Impedance 1 Vp-p /75 (Component and S-Video Y) 0. 7 Vp-p /75 (Component Pb/Cb, Pr/Cr) 0. 28 Vp-p /75 (S-Video C) 1 Vp-p /75 (Composite) Component Video Frequency Response 5 Hz ­ 100 MHz Audio Outputs Digital Output Analog Outputs Multichannel Pre Outputs Speaker Outputs Phones Optical: 1 TAPE, VIDEO1, VIDEO2, ZONE2 7. 1 ch L, R, C, SL, SR, SBL, SBR ZONE2 (L, R) 1 1 (Other than North American and Australian) TX-SR803/803E: 1/1 TX-SR703/703E/8370: 1/0 ZONE2 Tuner Section FM Tuning Frequency Range Usable Sensitivity Signal to Noise Ratio THD Frequency Response Stereo Separation North American: 87. 5 MHz­ 107. 9 MHz Other: 87. 5 MHz­ 108. 0 MHz Stereo: 22. 2 dBf (75 IHF) Mono: 15. 2 dBf (75 IHF) Stereo: 67 dB (IHF-A) Mono: 73 dB (IHF-A) Stereo: 0. 5% (1 kHz) Mono:0. 3% (1 kHz) 30 Hz­15 kHz / ±1 dB 40 dB (1 kHz) RS232 IR Input/Output 12 V Trigger Out AM Tuning Frequency Range Usable Sensitivity Signal to Noise Ratio THD North American: 530 kHz­1710 kHz European: 522 kHz­1611 kHz Asian: 530/522 kHz­1710/1611 kHz 300 µV/m 40 dB 0. 70% Specifications and features are subject to change without notice. 95 Sales & Product Planning Div. : 2-1, Nisshin-cho, Neyagawa-shi, OSAKA 572-8540, JAPAN Tel: 072-831-8023 Fax: 072-831-8124 ONKYO U. S. A. CORPORATION 18 Park Way, Upper Saddle River, N. J. [. . . ]