User manual ONKYO TX-SV313

[. . . ] 37 Listening to the Radio . . . . . . . . . . . . . . . . . . 39 Enjoying the Listening Modes . . . . . 43 Thank you for purchasing an Onkyo AV Receiver. Please read this manual thoroughly before making connections and plugging in the unit. [. . . ] Small: Select if the surround speakers are small. Large: Select if the surround speakers are large. None: Select if no surround speakers are connected. Note: · If the Front setting in step 4 is set to Small, the Large option cannot be selected. Testing the Speakers To test that all of the speakers are working properly, press the remote controller's [TEST TONE] button. LISTENING MODE STEREO SURROUND AUDIO SUBTITLE RANDOM REPEAT TEST TONE TEST TONE CH SEL PLAY MODE LEVEL- LEVEL+ DISPLAY VCR L NIGHT DVD CINE FLTR HDD RC-647M 7 Use the Down [ ] button to select "Surr Back, " and use the Left and Right [ ]/[ ] buttons to select Small, Large, or None. Small: Select if the surround back speakers are small. Large: Select if the surround back speakers are large. None: Select if no surround back speakers are connected. Notes: · If the Surround setting in step 6 is set to None, this setting does not appear. · If the Surround setting in step 6 is set to Small, the Large option cannot be selected. Use the Down [ ] button to select "Surr Back Ch, " and use the Left and Right [ ]/[ ] buttons to select 2ch or 1ch. 2ch: Select if two (left and right) surround back speakers are connected. The MULTI CH indicator appears on the display. MULTI CH indicator MULTI CH A BC Audio from the multichannel DVD input will now be used for the DVD input source. Note: · While the multichannel DVD input is selected, the Speaker Configuration settings on page 35 are ignored, and signals from the multichannel input are fed to the speakers as they are. A: The number of front channels (front left, front right, and center). B: The number of surround channels (surround left and surround right). If there's surround back channel information, this number will be 3. C: LFE channel for subwoofer (1 means yes). 38 Listening to the Radio Listening to AM/FM stations TUNER TUNING MASTER VOLUME TUNING PRESET Tuning into AM/FM Radio Stations Auto Tuning Mode 1 TUNING MODE STANDBY/ON STANDBY Press the [TUNING MODE] button so that the AUTO indicator appears on the display. ENTER MULTI CH DVD VIDEO 1 VIDEO 2 VIDEO 3 TAPE TUNER CD RETURN SETUP VCR VIDEO 3 INPUT PHONES SPEAKERS A B TONE STEREO LISTENING MODE DISPLAY DIGITAL INPUT DIMMER MEMORY TUNING MODE VIDEO L AUDIO R CLEAR 2 TUNING PRESET TUNING MODE Press the TUNING Up or Down [ ]/[ ] button. Searching stops when a station is found. With the built-in tuner, you can enjoy AM and FM radio stations. 1 TUNER Use the [TUNER] input selector button to select AM or FM. In this example, FM has been selected. Manual Tuning Mode 1 Band Frequency TUNING MODE Press the [TUNING MODE] button so that the AUTO indicator disappears from the display. (Actual display depends on country. ) 2 TUNING PRESET AM Frequency Step Setup (not North America and Europe) You must specify the AM frequency step used in your area. Note that when this setting is changed, all radio presets are deleted. Press and hold the TUNING Up or Down [ ]/[ ] button. The frequency stops changing when you release the button. Press the buttons repeatedly to change the frequency one step at a time. 1 Press the [SETUP] button, use the Up and Down [ ]/[ ] buttons to select "0. Hardware Setup, " and then press [ENTER]. [. . . ] Use the Left and Right [ ]/[ ] buttons to change the setting. Press the [SETUP] button when you've finished. · Video Attenuation This setting can be made for the DVD, VIDEO 1, VIDEO 2, or VIDEO 3 input. If you have a games console connected to an S-Video or composite video input, and the picture isn't very clear, you can attenuate the gain. [. . . ]