User manual ONKYO TX-SV919

[. . . ] 53 Advanced Operation . . . . . . . . . . . . . . . 64 Advanced Setup . . . . . . . . . . . . . . . . . . . . . . 68 Zone 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76 Thank you for purchasing an Onkyo AV Receiver. [. . . ] The Mute function is cancelled when the AV receiver is set to Standby. Notes: · Always turn down the volume before connecting your headphones. · The speakers are turned off while the headphones plug is inserted in the PHONES jack. (Zone 2 speakers are not turned off. ) · When you connect a pair of headphones, the listening mode is set to Stereo, unless it's already set to Stereo, Mono, Direct, or Pure Audio (not American TX-SV919). When you disconnect the headphones, the previous listening mode is resumed. · Only the Stereo, Direct, Pure Audio (not American TX-SV919), and Mono listening modes can be used with headphones. (The listening modes available also depends on the currently selected input source. ) · When the multichannel input is used, only the front left and right audio can be heard in the headphones. On the TX-SR702E, when the Stereo or Mono listening mode is selected, audio is downmixed for a good sound. 54 Basic Operation--Continued Displaying Source Information You can display various information about the current input source as follows. RECEIVER DISPLAY RECEIVER Press the [RECEIVER] button, and then press the [DISPLAY] button repeatedly to cycle through the available information. DISPLAY The following information can typically be displayed for input sources. Input source & volume Signal format* or sampling frequency Input source & listening mode *If the input signal is analog, no format information is displayed. If the input signal is PCM, the sampling frequency is displayed. If the input signal is digital but not PCM, the signal format is displayed. Information is displayed for about three seconds, then the previously displayed information reappears. Interpreting Surround Channel Values A BC A: The number of front channels (3 means front left, front right, and center). In addition to displaying text information, RDS can also help you find radio stations by type (e. g. , news, sport, rock, etc). The AV receiver supports four types of RDS information: PS (Program Service) Program Types Used in Europe (PTY) Type None News reports Current affairs Display NONE NEWS AFFAIRS Description No program type. Reports on current events and happenings. Topical reporting of current affairs, often with a wider range of topics than news reports. General information such as weather forecasts, consumer affairs, medical help, etc. Live sports action, sports news, and interviews. Radio plays and serials. Information INFO Sport Education Drama Culture SPORT When tuned to an RDS station that's broadcasting PS information, the station's name appears. When you press the [DISPLAY] button, the frequency is displayed for three seconds. RT (Radio Text) EDUCATE Formal educational programs. DRAMA CULTURE Cultural programs (including religious affairs). When tuned to an RDS station that's broadcasting RT text information, that information is shown on the display (see page 59). PTY (Program Type) Science and SCIENCE Programs about the natural technology sciences and technology. Varied VARIED Speech-based programs not covered by the above categories (e. g. , quizzes, panel games, and comedy). Popular commercial music, usually from past or present sales charts (e. g. , Top 40). [. . . ] The Sleep function turns off Zone 2 as well as the AV receiver. To set the Sleep function for Zone 2 only, see page 78. · Since the Zone 2 function and the REC OUT outputs use the same circuitry, you cannot use Zone 2 and record at the same time. When the [REC OUT] button is pressed, Zone 2 is turned off. [. . . ]