User manual ONKYO UP-DT1 REMOTE CODE

[. . . ] Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. only use attachments/accessories specified by the manufacturer. Unplug this apparatus during lightning storms or when unused for long periods of time. refer all servicing to qualified service personnel. [. . . ] Turn off your Universal Port-compatible Onkyo product. Turn off the Universal Port-compatible Onkyo product before setting the Mode selector. THROUGH: Select this to listen to the device connected to the UP-DT1's Universal Port, for example, an iPod in a UP-A1 dock. AUTO: When AUTO is selected, the source is selected automatically when the input source is changed on the Universal Port-compatible Onkyo product. For example, selecting the TUNER input source selects the UP-DT1, while selecting the Note that some Universal Port-compatible Onkyo products do not support this functionality, in which case you will need to set the Mode Selector manually. Use thumbtacks or something similar to fix the DAB antenna into position. Screw the supplied DAB antenna's plug onto the DAB ANTENNA jack. Once the UP-DT1 is ready for use, you'll need to select a DAB station and adjust the position of the DAB antenna to achieve the best possible reception. You can control the UP-DT1 with your Universal Port-compatible Onkyo product's remote controller. Aim it at your Universal Port-compatible Onkyo product, not the UP-DT1. You can use the following buttons on your Universal Port-compatible Onkyo product's remote controller. Used to view various information on the display. Used to switch the listing mode: alphabetical order, multiplex order, or active stations order. Turn on the Universal Port-compatible Onkyo product which the UP-DT1 is connected. If a new DAB station is introduced, or you move to a new area, you can run the Auto Tuning function again. Once the scanning process is complete, the first station that was detected is selected. Press the [DISPLAY] button repeatedly to display more information about the current DAB station. When tuned to a station that's broadcasting DLS text data, the text will scroll across the display. Use the [PLAY MODE] button to select the following options. Stations that cannot be received properly appear at the bottom of the list. With the DRC (Dynamic Range Control) setting, you can reduce the dynamic range of DAB digital radio so that you can still hear quiet parts even when listening at low volume levels--ideal for listening to the radio late at night when you don't want to disturb anyone. Use the Left/Right Arrow [ ]/[ ] buttons to select following options. [. . . ] (However, some products can control using the front panel's buttons. The displays shown in this manual differ to what's displayed on your Universal Port-compatible Onkyo product · The exact information displayed depends on your Universal Port-compatible Onkyo product. the displays shown in this instruction manual serve as examples only. If you can't resolve an issue yourself, try resetting the UP-DT1 as follows before contacting your Onkyo dealer. [. . . ]