User manual ONKYO USR-5RF

[. . . ] Contents Quick Start Intelligent Remote Controller 4 USR-5RF Instruction Manual Before Using 7 Operations 11 Thank you for purchasing the Onkyo Intelligent Remote Controller. Please read this manual thoroughly before making connections and plugging in the unit. Following the instructions in this manual will enable you to obtain optimum performance and listening enjoyment from your new Intelligent Remote Controller. Please retain this manual for future reference. Other Information 39 Precautions Care From time to time you should wipe the front and rear panels and the cabinet with a soft cloth. [. . . ] You need to program them by following the Device menu (see page 24). The remote controller also offers empty control panel buttons you can program and label as existing buttons. They are only visible in Learn and Label mode and appear without label or with label (intended for a specific function). You will also see previously deleted buttons: you can restore them by reprogramming them or you can reuse them for other commands. 23 Getting the Maximum out of it Programming device items Note: When you program a command to a device item, this command is automatically assigned to the corresponding button in the Home menu. The device tab is active when the name of a device is displayed. Switch to Learn mode by using the Mode button. Point the device's original remote controller to the remote controller's learning eye as described above. Tap the device tab to open the Device menu. Touch and hold either the remote controller's Left or Right button and tap the device you want to program. Even when you want to program the currently active device, you have to tap it in the Device menu. The label device starts blinking on the remote controller icon. Press and hold the button the remote controller has to learn on your device's original remote controller. If the remote controller has been input the command successfully, OK will blink on the display. You can release the button you're holding. If the remote controller has not learned the command successfully, you hear a short buzz and FAIL appears on the remote controller icon. Program all other items you want and return to Use mode via the Mode button. Programming direct-access and Left/Right Buttons Direct-access and Left/Right buttons can be programmed with a global function or with functions per device. Buttons with global functions always execute the same command, even if device is active. Buttons with functions per device execute commands depending on the active device. For example, the Left button is the Play command when the VCR is active. Note: Per-device functions overrule global functions. For example, when you program the Volume buttons globally but you assign a specific function to them with the tuner, the specific command will be executed when the tuner is the active device. Complete steps 2 to 7 in "Programming control panel buttons" on page 23. [. . . ] · Make sure the battery pack is installed properly in your remote controller (see page 10). 40 FAQ Can I program a button to execute more than one command?However, you can create a macro to execute a sequence of commands (see page 31). See "Programming device items" on page 24. How can I edit, label or delete buttons on home panels? [. . . ]