User manual ONKYO UWF-1

[. . . ] If liquid has been spilled, or objects have fallen into the apparatus, B. If the apparatus has been exposed to rain or water, C. If the apparatus does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the apparatus to its normal operation, D. [. . . ] Selection of other channels is not possible. This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter. IMPORTANT NOTE: IC Radiation Exposure Statement: This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Book Page 6 Tuesday, February 22, 2011 10:39 AM Hereby, ONKYO SOUND & VISION CORPORATION, declares that this UWF-1 is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Book Page 8 Tuesday, February 22, 2011 10:39 AM Using the UWF-1 About UWF-1 A wireless LAN (WLAN) is a local area network that relies on wireless communication. To achieve a wireless network connection, you will need the following components: ❑ Access point Also known as the base station, it links your networkcapable AV receiver (wireless client) with a PC or network. Access points fall into two categories: the bridge type that only performs data relay in a local area network, or the router type that has a built-in router functionality.  Wireless adapters Sometimes known as dongles, wireless adapters are extension devices that provide wireless network functionality when connected to a PC. There are several types of adapters, including PC cards and USB adapters. Connecting the UWF-1 wireless adapter to the USB port of a network-capable AV receiver lets you use your AV receiver as a wireless client (wireless terminal) and connect it to a PC or to the Internet. compatible models Compatible with new-series (TX-NRxx9 and higher) Onkyo AV receivers. For further details, visit the Onkyo web site. You can find the home page address on the back of this manual. Performing wireless LAN setup on the AV receiver To achieve a wireless network connection, it is necessary to perform the wireless LAN setup. The setup can be done either automatically or manually. Note • Do not connect any other wireless adapter than the UWF1 to the USB port of your network-capable AV receiver, as other wireless USB adapters are not supported. € Depending on your connection and the AV receiver’s functionality, menus won’t be displayed on screen. In this case, use the AV receiver’s display to make the settings. € The wording of displayed items varies according to the AV receiver’s functionality. Book Page 9 Tuesday, February 22, 2011 10:39 AM Automatic wireless LAN setup 1 2 3 Connect the UWF-1 to the USB port on your network-capable AV receiver. Use q/w to select “Auto Setup” and then press ENTER. [. . . ] This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. modèles pour l’Europe Fr-4 UWF-1. Book Page 5 Tuesday, February 22, 2011 10:39 AM Hereby, ONKYO SOUND & VISION CORPORATION, declares that this UWF-1 is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Book Page 4 Tuesday, February 22, 2011 10:39 AM Para los modelos europeos Hereby, ONKYO SOUND & VISION CORPORATION, declares that this UWF-1 is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. [. . . ]