User manual OPPO DIGITAL HM-31

[. . . ] A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. Protect the power cord from being walked on or pinched, particularly at plug, receptacle, and the point where it exits from the apparatus. [. . . ] Take an HDMI cable and plug one end into the HDMI INPUT port on your HDTV or video projector. Plug the other end into the OUTPUT port of the HDMI Switch. Take another HDMI cable and plug one end into the HDMI OUTPUT port on your DVD player. Plug the other end into the HDMI INPUT 1 port of the HDMI Switch. Repeat the above step to connect your Cable Box, Digital Video Recorder (DVR) or Game Console. Plug the DC +5V output plug of the power adapter into the DC IN jack of the HDMI Switch. Plug the power adapter into an AC power outlet. Remote Control Button: Function: Select the next active HDMI input 3. 4. Your HDMI Switch is now properly connected. Note: The remote control uses infrared light signal and requires direct line-of-sight to the IR Remote Sensor. Please make sure that the IR Remote Sensor is not blocked. Otherwise, please use an External IR Remote Sensor connected to the HDMI Switch. Directly select a specific HDMI input The remote control uses a CR2025 lithium battery. Should you need a replacement battery, it is usually available from your local electronics and camera stores. 4 5 OPERATION HDMI Input Indicators The HM-31 has three HDMI Input Indicator lights on its front panel. When the HM-31 senses audio/video transmission on one of its HDMI INPUT ports, the corresponding HDMI Input Indicator is illuminated in Red color. When an HDMI INPUT is selected for use, the corresponding HDMI Input Indicator is illuminated in Blue color. The HDMI Input Indicator is not illuminated when there is no input signal or no HDMI cable connected. MOUTING OPTIONS Wall Mounting The HM-31 HDMI Switch can be wall-mounted. To vertically mount the HM-31 HDMI Switch, please drill two holes on the wall using the included wall-mount template as guidance. Install appropriate anchors if necessary. Screw in two flat head screws into the holes or anchors, and leave approximately 1/16 inch space between the screw head and the wall surface. Hang the HM-31 HDMI Switch on the screws using the key holes on the bottom of the HDMI Switch. Due to the variation of possible mounting surfaces, mounting hardware is not included. There is an additional IR Remote Sensor on the top of the HM-31 HDMI Switch to facilitate wall-mount operation. [. . . ] THE FOREGOING WARRANTY IS THE ONLY WARRANTY WITH RESPECT TO THE PRODUCT AND OPPO DIGITAL, INC. MAKES NO OTHER WARRANTY WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE PRODUCT INCLUDING MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. may at its sole discretion, refuse to honor the warranty of any such unauthorized product that may be presented for service. Warranty service can only be performed by OPPO Digital, Inc. [. . . ]