User manual OPTICOM IPVD-611M DATASHEET

[. . . ] Do not pull electric wire or do not touch power plug with wet hands. Do not bend the power cable forcedly or do not press it with heavy materials. Do not use damaged power cord or loose outlet plug. -Can result in electronic shock or fire. [. . . ] -WRITE LOG :Select to write LOG info. Chapter IV 54 SYSTEM Sets how to operate event related with DISK mainly. DISK FULL Sets when HDD is full of record. DISK ERROR Sets when there is an error on HDD. S. M. A. R. T Enables the system to prevent possible malfunction of HDD by interfacing between system and HDD. 55 Chapter-V. SEARCH Chapter V 56 SEARCH 3 1 2 1 Playback Screen : Record Playback 2 Playback Time 3 Display Status : Playback Time Display Playback Icon Pause () Playback () Multiple Playback( , , ) It randomly shows the first searched record file when it goes to SEARCH MODE. This type is the same as on event search , so it is possibly not to shows The exact record file searched . Chapter V 57 SEARCH MENU DISPLAY Select screen division mode. (1, 4, 9, 16 spirit) PLAY/PAUSE : Play from the position that played the latest SEARCH KEY BACK STEP : Calendar Search REW : Move to the first recorded data STEP : Event Search FF : Move to the last recorded data STOP : Exit Playback (Return to Live Display) CALENDAR SEARCH Select date , hour, minutes, seconds in turn on calendar search. When you click MINUTE, you can find specific record status as right below. Chapter V 58 EVENT SEARCH It shows all EVENT record list. If you click related EVENT, It plays that event promptly. It may not be the same channel image as shown on EVENT LIST because it shows the first display image recorded at that time zone. SEARCH KEY Can be selectable on EVENT search. -START/END :Set EVENT search start, end time. -MOTION/SENSOR/VIDEO LOSS :Selectable per each camera DATE/TIME SEARCH Search data by Date/Time . You can search the event promptly When you know the exact event time. Chapter V 59 FIRST Move to first part of recorded DATA. LAST Move to last part of recorded DATA. BOOKMARK Sets automatically starting time during back up. Low Speed : System sends off images at normal speed in consideration of stability. 3 Status Icon Status icon of connected DVR Chapter VI 66 <Recording Status> Shows and check the recording status <Event Status> Shows DVR's event status and you can check the status of Motion, Sensor, Video Loss at real time. <Alarm Control> You can On/Off the DVR's alarm if you press the Alarm control button. <HDD Status> Shows the connected DVR HDD status. You can check temperature and status at real time. 4 REMOTE SEARCH Execution and Set Up Set Up Execution Pressing each button operates REMOTE SEARCH or Set Up. REMOTE (LIVE) and REMOTE SEARCH are made up in separate program. REMOTE SEARCH Execution Chapter VI 67 Remote Set Up <Camera> 1 2 3 4 1 No : Item to select camera No To set up all the camera equally, Choose "select all" Enable : Selection item to use camera, Removing the check stops using that channel. 2 Title : Item to revise/type the camera name. Security : When checked, It displays `Hidden' on monitor. (though it keeps recording) 3 Link PTZ : Sets up PTZ camera. PTZ address: Item to assign PAN TILT address per camera. Name :Item to check PTZ Camera's model name. ID : Item to select PTZ address per camera. Port bit rate : Item to select the PTZ's port bit rate. Parity : Item to select Parity. 4 Audio : Item to select which audio channel to be used among total 4 audio inputs. Chapter VI 68 Remote Setup <Alarm> 1 1 No : Item to select Alarm No. To set up all the camera equally, Choose "select all" Enable : Item to select to use Alarm, Removing the check stops using that channel. [. . . ] Click below Import button to list events. Shows current searched event lists. Click Stop button first and select a certain event list and click Hotkey to play the event. 10 lists are shown every time clicks import buttton <Event Search Window> Please make sure to select "WRITE LOG of the system. WRITE LOG" aren't If not, event lists aren t searched. Chapter VI 4 86 Connection Information and Button Shows DVR's name, IP address and connection status. Backup play button Connect/Disconnect Button : Button to connect to other DVR in the saved list When many DVRs are registered in the DVR list, each DVR can be remotely searched without closing The Remote Program. [. . . ]