User manual OPTICOM NVD-120 DATASHEET

[. . . ] Do not pull electric wire or do not touch power plug with wet hands. Do not bend the power cable forcedly or do not press it with heavy materials. Do not use damaged power cord or loose outlet plug. -Can result in electronic shock or fire. [. . . ] - ALARM/BUZZER DWELL :Set alarm & buzzer time. - E-MAIL :Select EVENT info to be sent by e-mail. - CALLBACK :Select EVENT info to be sent to AGENT. - WRITE LOG :Select to write LOG info. Chapter IV 53 SYSTEM Sets how to operate event related with DISK mainly. DISK FULL Sets when HDD is full of record. DISK ERROR Sets when there is an error on HDD. S. M. A. R. T Enables the system to prevent possible malfunction of HDD by interfacing between system and HDD. If you found "BAD HDD" mark in the S. M. A. R. T function, please exchange HDD as soon as possible 54 Chapter-V. SEARCH Chapter V 55 SEARCH 3 1 2 1 Playback Screen : Record Playback 2 Playback Time 3 Display Status : Playback Time Display Playback Icon Pause ( ) Playback ( ) Multiple Playback( , , ) It randomly shows the first searched record file when it goes to SEARCH MODE. This type is the same as on event search , so it is possibly not to shows The exact record file searched . Chapter V 56 SEARCH MENU DISPLAY Select screen division mode. (1, 4 spirit) CALENDAR SEARCH Select date , hour, minutes, seconds in turn on calendar search. When you click MINUTE, you can find specific record status as right below. Chapter V 57 Section is Generated and maintained recording data that occurs duplicating data returning previous time by any cause during DVR operating Time progress Section#1: Sectoin#2: EVENT SEARCH It shows all EVENT record list. If you click related EVENT, It plays that event promptly. It may not be the same channel image as shown on EVENT LIST because it shows the first display image recorded at that time zone. SEARCH KEY Can be selectable on EVENT search. -START/END :Set EVENT search start, end time. -MOTION/SENSOR/VIDEO LOSS :Selectable per each camera Chapter V 58 DATE/TIME SEARCH Search data by Date/Time . Etc : VGA card to support YUV mode YUV. . . Data Save Place :Sets ups basic path of AVI file to save. AVI Saving time : Sets up saving time of AVI file from remote. Network Speed : High Speed : System sends off images at high speed possible. Low Speed : System sends off images at normal speed in consideration of stability. 3 Status Icon Status icon of connected DVR Chapter VI 65 <Recording Status> Shows and check the recording status <Event Status> Shows DVR's event status and you can check the status of Motion, Sensor, Video Loss at real time. <Alarm Control> You can On/Off the DVR's alarm if you press the Alarm control button. <HDD Status> Shows the connected DVR HDD status. You can check temperature and status at real time. 4 REMOTE SEARCH Execution and Set Up Set Up Execution Pressing each button operates REMOTE SEARCH or Set Up. REMOTE (LIVE) and REMOTE SEARCH are made up in separate program. REMOTE SEARCH Execution Chapter VI 66 Remote Set Up <Camera> 1 2 3 4 1 No : Item to select camera No To set up all the camera equally, Choose "select all" Enable : Selection item to use camera, Removing the check stops using that channel. 2 Title : Item to revise/type the camera name. Security : When checked, It displays `Hidden' on monitor. (though it keeps recording) 3 Link PTZ : Sets up PTZ camera. PTZ address: Item to assign PAN TILT address per camera. Name :Item to check PTZ Camera's model name. ID : Item to select PTZ address per camera. [. . . ] Preset Save : Save preset No. <Preset Move> <Preset Save> Chapter VI 83 Remote Search Playback Display Camera Name Green Border Line : Display the selected camera. Recorded Date/Time SECTION Selects section Section is created when Date/Time is changed to former times. Former Date/Time will be kept in section 0. Newly set Date/Time will be kept in section 1. . . . . . Chapter VI 84 Move & Event Search Move Button : Move to selected time Event Search Button : Popup the event search window Shows start and end time of recorded data. Moves to the time to search and press OK button. <Move Window> Select the time to event search Select events in detail. Select the camera to search. [. . . ]