User manual OPTICOM OWL REV1.3

[. . . ] Safety precautions 2 Failure to follow these instructions could result in serious personal injury or death. Failure to follow these instructions could result in personal injury or property damage. Notifies user of references to use conveniently. Install this equipment avoiding a direct ray of light, heats and moistures. -Doing not, can result in lowering efficiency, electric shock or fire. [. . . ] You can search the event promptly When you know the exact event time. FIRST Move to first part of recorded DATA. LAST Move to last part of recorded DATA. BOOKMARK Sets automatically starting time during back up. It is useful to set a bookmark as starting time while search the data. PLAYBACK USER INERFACE Playback buttons appears when locate the mouse pointer at the bottom of screen Chapter V 59 DEVICE Search internal or external SYSTEM DISK . LOCAL DEVICE Search the data of internal DISK. BACKUP DEVICE Search backup device (Select when you play the backup data. ) If there are various back up devices , you can select a specific one . 60 Chapter-VI. Client program Chapter VI 61 REMOTE 1 4 3 5 7 6 10 8 2 9 <REMOTE PROGRAM IS?> With connected to DVR remotely, it is to perform Remote Monitoring, Remote Search, Remote Backup etc. (Please install remote program from the program CD) Environment conditions for Remote Program 1. 256M or higher main memory(512M recommend) 3. WINDOWS O/S(WIN 2000, XP, Vista(32bit)) 4. 32MB VGA card supports RGB (ATI series recommend) 5. At least 10Mbps network speed (Max 100Mbps support) Please note that some buttons and graphics may not be activated at this moment. Those inactivated buttons will be used later when system upgrades and expands Chapter VI 62 1 Connection information and Button Shows DVR's name, IP address and connection status. DVR connection button. Add : Enter IP address and user authentication to connect DVR Modify Delete <DVR Connection Window> : Modify IP address and user authentication of the existing list : Delete existing use. DVR name : Specify a name that you can easily identify. Address : Specify assigned IP address to connect DVR (Type the Host name of REAL IP or DDNS. ) <New Connection/Modify Dialogue Window> Chapter VI 63 <What is IP address?> A set of address system that is used to find out destination in network access via Internet or LAN. IP address is divided into REAL IP and VIRTUAL IP, and REAL IP must be sent on DVR for the access from remote site via internet. You can be assigned with REAL IP Or DDNS service ID (Hostname of Dynamic Domain Name Server). Service Port :Set this the same as the service port assigned to DVR. <What is service port?> Function to make the virtual IP available to the devices such PC or DVR with Automatic connection to the specified service port when remote access is made To router via the router or IP Share of one REAL IP. (But this function is available Only when router or IP Share supports it. ) User Name : Type the user name authorized in DVR Password : Type the password authorized in DVR Save Authentication Information :Save Authentication Information 2 Program Information and Set up Program Information : Shows Remote Program's information. Program Setup : Sets up Remote Program. <Program Information Window> ( Language, Display Output, Resolution, Save Path, Network Speed Etc) Chapter VI 64 Language : To choose program's language. Video Display : YUV mode : According to your PC graphic card ability, the support can be decided. This mode shows faster, clear ability of image transmission than RGB mode. RGB mode : It is widely compatible with most graphic cards, and select this when YUV mode is not supported. . Resolution from 1024X768 starts : It always shows 1024 x768 when you check. . Above setting value will apply after restart of the program. <Program Setup Window> <Recommended Graphic Card> ATI series : Radeon7000series (More then 32M), RADEON series. . . NVIDIA series : M64series(More then 32M), GEFORCE series. . . [. . . ] Click below Import button to list events. Shows current searched event lists. Click Stop button first and select a certain event list and click Hotkey to play the event. 10 lists are shown every time clicks import buttton <Event Search Window> Please make sure to select "WRITE LOG" of the system. If not, event lists aren't searched. Chapter VI 85 Connection Information and Button zGk}y' SGpwGGGG . Backup play button Connect/Disconnect Button : Button to connect to other DVR in the saved list When many DVRs are registered in the DVR list, each DVR can be remotely searched without closing The Remote Program. [. . . ]