User manual OPTICON M 5

[. . . ] · Trademarks used are property of their respective owners. · Under no circumstances shall Opticon be held responsible for any special, incidental, consequential or indirect damages howsoever caused. Precautions for Use 1. Handling Instructions M-5 · Do not attempt to disassemble, modify or update this device. · Do not use the scanner while operating machinery. [. . . ] and the scanner's straight cable to a host computer. A cover used to fix the connection between the Only for M-5-WEDGE+PS package. AC adapter with interchangeable plugs Plugs for different regions This manual provides the basic product specification and setup instructions. Copyright © 2009, Opticon All rights reserved. Instruction of connector cover An instruction manual for the connector cover Overview M-5 Basic Specifications Parameter Physical Size Features Weight Operation Scan Confirmation Section Keys Interfaces RS-232C USB Wedge ASIC SDRAM Flash ROM Scanning Light Source Wavelength Section Scanning Method Control Section (H)140. 0 Detailed View Specifications (W)92. 0 (D) 95. 5 mm Approx. 295g (excluding the cable) Buzzer and 3 colors LED(Green/Blue/Orange) 2 keys (Trigger Switch/Mode Switch) 9600bps 115. 2kbps Full-Speed 12Mbps(HID/VCP) Hi-Power Bus-powered PS/2 Keyboard (Connect or disconnect the keyboard. ) OEY-0603 CPU:ARM-1026EJ-S Core:160MHz 128Mbits(1M 16Mbits(1M 4Banks 32Bits) 16Bits) Flash Memory 8-AllnGaP Red LEDs(Omniscan Mode)/625nm 4-AllnGaP red LEDs (Mobile Mode)/633nm WVGA(752 x 480 pixels) CMOS area sensor No. Part Optical Window Trigger Switch Mode Switch Indicator LED Function The trigger switch is used for the manual scanning operation. A single aiming guide will be activated in this mode. The mode switch toggles between Mobile phone scanning mode and Normal scanning mode. Green LED light shows the scanning operation has been successful. Blue LED light shows when the scanner is ready to scan. UPC-A, UPC-E, UPC-E1, UPC-A Add-on, UPC-E Add-on, EAN-13, EAN-8, EAN-13 Add-on/EAN-8 Add-on, JAN-8 , JAN-13, Code Supported 2 of 5, Interleaved 2 of 5, Code 93, Symbologies 39, Tri-Optic, NW-7, IndustrialMSI/Plessey, UK/Plessey, TELEPEN, Code 128, GS1-128, S-Code, (1D) Matrix 2 of 5, Chinese Post Matrix 2 of 5, IATA, Code 11, Korean Postal Authority code , GS1 DataBar, Postal Code Power Supply Section Supported Symbologies (2D) Operating voltage PDF417, MicroPDF417, QR Code, MicroQR Code, Data Matrix (ECC 000-140/ECC 200), MaxiCode (Modes 2 to 5), Aztec Code, EAN. UCC Composite bar code, Codablock F 4. 5 to 6. 6V USB RS-232C, Wedge 400mA Peak 420mA Current consumption Average (when scanning and decoding) (when scanning and decoding) Indicator LED While Mobile Orange LED light shows when the scanner phone scanning Mode is ready for mobile code scanning. Buzzer Holes Screw Holes Used to mount the scanner onto a base plate, wall etc. using D4 (diameter: 4mm) screws. 280mA(typ) 210mA(typ) 140mA(typ) 130mA(typ) Stand-by Durability Operating Temp. C Operating Humidity 5 to 95 (non-condensing) Storage Humidity 5 to 95 (non-condensing) Fluorescent 10, 000lx or less Ambient Incandescent lamp 10, 000lx or less Light Immunity Sunlight 50, 000lx or less (*1) Dust-and-Drip Proof IP52 Static Electricity 15kV (no destruction) Dropped once from each of 5 angles onto Shock concrete floor from a height of 150cm with Endurance no defects found. (Total 5 times) (*1)Except Mobile phone scanning mode in each condition. Please note that scanning while the LCD screen is exposed to direct sunlight may have a negative effect on the reading performance. Various Scanning Modes The following modes are available for different uses: Normal scanning mode A mode in which the scanner is configured optimally for general barcode reading. The device automatically starts scanning when a label is held in front of it. The trigger key activates the single line scanning. Mobile phone scanning mode A special mode in which the lighting conditions are optimized for reading barcodes, displayed on mobile devices such as a phone. The device automatically starts scanning when a label is held in front of it. The trigger key activates the single line scanning. Single line scanning While the trigger switch is pressed, the illumination LEDs turn on and only one code can be read. The single line can read one target code out of multiple printed codes in this mode. Basic Specifications for Universal AC adapter Parameter Physical Features Input Output Size Cable Length Colour Power Voltage Supply Current Power Voltage Maximum Current Environmental Operating Temp. Specification Operating Humidity Storage Temp. Storage Humidity 1. 8m Black AC 90V to 265V 500mA Max 5. 7V to 6. 3V 2A Max 0 to 40 deg. C 25 to 85% (non-condensing) 20 to 60 deg. [. . . ] tel: 800-636-0090 / email: opticon@opticonUSA. com Opticon S. A. S. tel: +33 (0)1-41461260 / email: opticon@opticon. fr Opticon Sensoren GmbH tel: +49 (0)6074-91890-0 / email: sales. de@opticon. com Opticon s. r. l. tel: +39 (0)051-6321800 / email: opticon@opticonitalia. it Opticon Sensores S. L. tel: +34 (0)902-747469 / email: info@opticon. es Sweden United Kingdom Taiwan China Australia Brazil Opticon Sensors Nordic AB tel: +46 (0)8-58548560 / email: henrik@opticon-sensors. se Opticon Limited tel: +44 (0)1582-635100 / email: sales@opticon. co. uk Opticon Far Eastern Ltd. [. . . ]