User manual OPTICON NLV 1001

[. . . ] Compact Fixed Position Laser Scanner NLV 1001 The NLV 1001 is a compact fixed-position laser barcode scanner, using short-wavelength red laser beam. Specifications Manual Opticon NLV 1001 Specifications Manual All information subject to change without notice. Document History Model Number: Edition: Date: NLV 1001 5A 2008-12-02 Specification Number: Original Spec Number: SS06037 SS06079 Copyright 2008 Opticon. All rights reserved. This manual may not, in whole or in part, be copied, photocopied, reproduced, translated or converted to any electronic or machine readable form without prior written consent of Opticon. Limited Warranty and Disclaimers PLEASE READ THIS MANUAL CAREFULLY BEFORE INSTALLING OR USING THE PRODUCT. Serial Number A serial number appears on all Opticon products. This official registration number is directly related to the device purchased. [. . . ] The decoded text of barcode images is output through RS-232C, USB, or Wedge interfaces based on the specification. Supported symbologies: Linear (1D) JAN/UPC/EAN, incl. add-on Codabar/NW-7 Code 11 Code 39 Code 93 Code 128 GS1-128 (EAN-128) IATA Industrial 2of5 Interleaved 2of5 ISBN-ISMN-ISSN Matrix 2of5 MSI/Plessey GS1-Databar (RSS ) S-Code Telepen Tri-Optic UK/Plessey Chinese Post Korean Postal Authority code Postal 2D Composite Codes MicroPDF417 PDF417 7 Opticon NLV 1001 Specifications Manual 3. Dimensions W 30. 0 X D 43. 3 X H 20. 0 mm 3. 2. Weight 18. 5 g max (excluding cable) 4. Operating Temperature and Humidity Temperature: -10 to +45 °C Humidity: 20% to 85% RH 4. 2. Storage Temperature and Humidity Temperature: -20 to +60°C Humidity: 20% to 90% RH 4. 3. Ambient Light Immunity Decoding performance is guaranteed when the range of illumination on a barcode surface is between zero and the following values: Incandescent Light Fluorescent Light Sunlight to 3000 lx to 3000 lx to 50, 000 lx Conditions Barcode Sample: OPTOELECTRONICS Test Sample PCS: Resolution: Symbology: Quiet zone: N/W ratio: Distance: Angle (see note below): Curvature: Power supply voltage: 0. 9 0. 25 mm 9-digit Code 39 10 mm 1:2. 5 150 mm = 0° = 15° = 0° R= 5. 0 V Direct light or specular reflection from a light source should be prevented from entering the acceptance area. Note: , and respectively represent pitch, skew and tilt. Please see section 0 for how these values are defined. 8 Opticon NLV 1001 Specifications Manual 5. Absolute Maximum Ratings Parameter Power supply voltage (Vcc to GND) Input voltage Power ripple Symbol VDD VIN Value -0. 5 to 6. 5 -0. 5 to VCC+0. 5 0. 1p-p Max. (10­100 kHz) Unit V V V Storage temperature TSTG -20 to 60 °C 5. 2. Recommended Operating Conditions Item Power supply voltage Operating temperature Input voltage Output voltage Symbol VDD Ta Vin Vout Condition Min 4. 5 Typ 5. 0 Max 5. 5 45 VDD VDD Unit °C Non-condensing Non-freezing 0 0 0 5. 3. Electrical Characteristics VCC =5V Ta=25°C Parameter Operating current Rush current peak Standby current Startup time Symbol IOP IPEEK IPRE TD Min - Typ 85 400 35 100 Max 150 1500 70 - Unit mA mA mA ms Conditions: · · · Connect 1 resistance to a power supply line in series and measure the current by the voltage between both ends of resistance. Power supply voltage is measured at a connector terminal area. The current value depends on the interface type and host computer to which the device is connected. 9 Opticon NLV 1001 Specifications Manual 6. Laser Scan Specifications Parameter Light emitting diode Wavelength Output power Scanning method Scanning rate Scanning angle Effective scanning angle Specification Red laser diode 650 ± 10 1. 0 Bi-directional 100 ± 20 54 ± 5 44 (Min) Unit nm mW scans/s ° ° 7. Technical Specifications The conditions for technical specifications are as follows, unless otherwise specified in each section. Conditions Ambient temperature and humidity: Ambient light: Background: Room temperature (5 to 35º C) Room humidity (45% to 85% RH) 500 to 900 lx Barcode = black Space = white Margin = white Background of label = black 5. 0 V 0. 5 seconds or less for each decoding. Repeat this 10 times. Power supply voltage: Decoding test: 7. 1. Print Contrast Signal (PCS) 0. 45 or higher (over 70% of reflectivity of space and quiet zone). PCS= Reflectance of white barReflectance of black bar Reflectance of white bar Scanning performance may decline if dirt or scratches mar the optical window. [. . . ] Laser Safety The scanner emits laser beams. Class 2 laser devices are not considered to be hazardous when used for their intended purpose. IEC60825-1+A2: 2001 Class 2 JIS-C-6802: 2005 Class 2 FDA CDRH Laser Class 2. Complies with 21 CFR 1040. 10 and 1040. 11 except for deviations pursuant to laser notice No. [. . . ]