User manual OPTICON NLV 2101

[. . . ] Fixed-position 2D Barcode Imager NLV 2101 The NLV 2101 is a fixed-position 2D barcode imager with a compact camera module for scanning both linear (1D) and 2D symbologies. Specifications Manual Opticon NLV 2101 Specifications Manual All information subject to change without notice. Document History Model Number: Edition: Date: NLV 2101 1 2007-04-11 Specification Number: Original Spec Number: SS07027 SS07001 Copyright 2008 Opticon. All rights reserved. This manual may not, in whole or in part, be copied, photocopied, reproduced, translated or converted to any electronic or machine readable form without prior written consent of Opticon. Limited Warranty and Disclaimers PLEASE READ THIS MANUAL CAREFULLY BEFORE INSTALLING OR USING THE PRODUCT. Serial Number A serial number appears on all Opticon products. This official registration number is directly related to the device purchased. [. . . ] Ambient Light Immunity Decoding performance is guaranteed when the range of illumination on a barcode surface is between zero and the following values: Incandescent light Fluorescent light Sunlight to 10, 000 lx to 10, 000 lx to 100, 000 lx Conditions Barcode Sample: PDF417 with 0. 254 mm resolution Distance: Angle: Curvature: Power Supply Voltage: 107 mm from the plastic mask of the camera module = 0° = 15° = 0° R= 5. 0 V Scanning performance is guaranteed as long as direct light or a reflection from a light source does not impact the light detection range of the NLV 2101. Note: , and respectively represent pitch, skew and tilt. Please see section 6 for how these values are defined. Figure 1: Ambient light and scanning performance 9 Opticon NLV 2101 Specifications Manual 5. Framework and Structure This product consists of a camera module, a decoder, communication controls, an interface, and a power supply. The camera module consists of a CMOS area image sensor and lens. The decoder decodes the scanned 1D and 2D codes. The interface transfers data between this product and the host system. · · The NLV 2101 with RS-232C interface requires the supplied AC adaptor. The NLV 2101 with USB interface uses bus power. It does not require an AC adaptor. Figure 2: Framework and structure diagram 5. 2. AC Adapter AC adapter output: DC 5. 0 V, 600 mA or less Parameter Power Supply Voltage 5 V ± 10% Ripple: 0. 1 Vp-p or less, power supply voltage 5. 0 V Operating Current (typical) Stand-by Current (typical) Min 4. 5 10 230 130 Max 5. 5 100 330 165 Unit V kHz mA mA 5. 2. 2. USB Power Supply Current consumption: 300 mA Parameter Bus power class: high power (500 mA) Ripple: 0. 1 Vp-p or less, power supply voltage 5. 0 V Min 10 Max 100 Unit mA kHz 10 Opticon NLV 2101 Specifications Manual 6. Optical Specifications Parameter Scan method Scan rate Pixel count Aiming LED wavelength (2 green LEDs) Lighting LED wavelength (4 red LEDs) View angle Specification CMOS area sensor (black and white) 30 1280 (H) x 1024 (V) 527 630 Horizontal: 47 Vertical: 37. 5 Unit fps pixel nm nm ° 11 Opticon NLV 2101 Specifications Manual 7. Technical Specifications The conditions for technical specifications are as follows, unless otherwise specified in each section. Conditions Ambient temperature and humidity: Ambient light: Light source: Background: Room temperature (5 to 35º C) Room humidity (45% to 85% RH) 1000 to 1500 lx (on the surface of a barcode) 3-wavelength inverter fluorescent light Barcode = black Space = white Margin = white Background of label = black 5. 0 V 70% and higher Power supply voltage: Successful scans: 7. 1. Symbologies The size of barcodes does not include quiet zones. Barcode Resolution 0. 508 mm 0. 254 mm 0. 127 mm 0. 26 mm 0. 26 mm Symbology Code 39 Code 39 Code 39 13-digit JAN 8-digit JAN PCS 0. 9 0. 9 0. 9 0. 9 0. 9 Size (mm) 29 x 25 14 x 10 11 x 10 25 x 19 17. 5 x 15. 5 Digits 2 2 4 13 8 Barcode samples with 0. 127 mm and 0. 26 mm resolution are OPTOELECTRONICS test samples. Other charts are printed by a regular printer. N/W Ratio: Angle: Curvature 1:2. 5 = 0°, = 15°, = 0° R= 12 Opticon NLV 2101 Specifications Manual 7. 1. 2. PDF417 Resolution 0. 339 mm 0. 254 mm 0. 127 mm Error Correction Level-4 Level-4 Level-4 PCS 0. 9 0. 9 0. 9 Size (mm) 35 x 22 26 x 16 13 x 8 Characters 17 17 17 Charts are printed by a regular printer. QR Code (Model 2) Resolution 0. 339 mm 0. 212 mm 0. 169 mm Error Correction M M M PCS 0. 9 0. 9 0. 9 Size (mm) 10 x 10 6x6 5x5 Characters 44 44 44 Charts are printed by a regular printer. Data Matrix Resolution 0. 339 mm 0. 212 mm 0. 169 mm Model ECC200 ECC200 ECC200 PCS 0. 9 0. 9 0. 9 Size (mm) 8x8 5x5 4x4 Characters 40 40 40 Charts are printed by a regular printer. Maxi Code Resolution 0. 889 mm Model Standard PCS 0. 9 Size (mm) 26 x 26 Characters 29 Charts are printed by a regular printer. 7. 2. Print Contrast Signal (PCS) 0. 45 or higher (over 70% of reflectivity of space and quiet zone). [. . . ] The estimate of MTBF and product life cycle is based on standard operation of the product within the recommended temperature range and without extreme electronic or mechanical shock. 41 Opticon NLV 2101 Specifications Manual 16. LED Safety All LED-based products are LED class 1 and are safe under reasonably foreseeable operating conditions. Do not stare into the beam. · · JIS C6802: 2005: Class 1 IEC 60825-1+A2: 2001 Class 1 16. 2. Product Safety EN60950-1: 2001 IEC60950-1: 2001 16. 3. [. . . ]