User manual OPTICON OPI 2002

[. . . ] Imager Scanner OPI 2002 The OPI 2002 is a handheld 2D scanner with CMOS imager. Specifications Manual Opticon OPI 2002 Specifications Manual All information subject to change without notice. Document History Model Number: Edition: Date: OPI 2002 1A 2007-04-19 Specification Number: Original Spec Number: SS07031 SS07018 Copyright 2007 Opticon. All rights reserved. This manual may not, in whole or in part, be copied, photocopied, reproduced, translated or converted to any electronic or machine readable form without prior written consent of Opticon. Limited Warranty and Disclaimers PLEASE READ THIS MANUAL CAREFULLY BEFORE INSTALLING OR USING THE PRODUCT. Serial Number A serial number appears on all Opticon products. This official registration number is directly related to the device purchased. [. . . ] USB Power Supply Parameter Bus power (class) Nominal current Value High-power (500 mA max. ) 500 mA 6. 4. Wedge Power Supply (Host Power Supply) Parameter Input power supply voltage Range of working voltage Power ripple Current consumption DC 5. 0 V 4. 5 to 5. 5 V 0. 1 Vp-p max. (10 to 100 kHz) Power supply voltage: 5. 0 V Main power supply OFF: 170 mA max. Main power supply ON: 5 mA max. Value Note: It is possible to use the keyboard even when the main power supply is turned OFF. However, if the main power supply is off, the OPI 2002 cannot be used. 6. 5. AC Adaptor Specifications (RS-232C and Wedge Models) 6. 5. 1. Input Specifications Parameter Power supply voltage Power supply frequency Maximum current Inrush current AC 90 V to 264 V 47 Hz to 63 Hz 0. 2 A 50 A/AC 240 V Value 11 Opticon OPI 2002 Specifications Manual 6. 5. 2. Output Specifications Parameter Output voltage Power ripple Short-circuit protection Value 6. 0 V ±5% / output current: 0 to 0. 75A 120 m Vp-p max. Imager Scanning Parameter Light-emitting element (10 AllnGaP red LEDs) Scanning method Number of effective pixels Frame rate Scan angle Focal distance Specification(s) 630 SXGA (1. 3 million pixels) CMOS area sensor (gray scale) 1280 x 1024 (Readable pixel count is 1282 x 1026 dots) Up to 30 Horizontal: 47. 0 Vertical: 37. 5 110 mm from the front edge of the scanner Unit nm -- dots fps ° mm 7. 2. Imager Output Item Image data format Shades of gray Range of output image Resolution of output image Interface of output image Baud rate Specification(s) Windows Bitmap, JPEG, TIFF 256, 16, 2 Select in horizontal and vertical scale. Full, 1/2, 1/3, 1/4 RS-232C, USB-VCP USB-VCP (Full speed) RS-232C (115. 2 kbps) About 4 sec About 120 sec 12 Opticon OPI 2002 Specifications Manual 8. Technical Specifications The conditions for technical specifications are as follows, unless otherwise specified in each section. Conditions Ambient temperature and humidity: Ambient light: Angles: Background: Room temperature (5 to 35º C) Room humidity (45% to 85% RH) 500 to 1500 lx Pitch: = 0°, Skew: = 15°, = 0° Barcode = black Space = white Margin = white Background of label = black 6. 0 V Carry out 10 scanning tests. Scanner is approved when scanning is successful in 70% of the tests. Code 39 (resolution 0. 1 and 0. 127 mm) and JAN codes used for the tests are OPTOELECTRONICS test samples printed in a normal printer. (NW ratio = 0:1. 25) Power supply voltage: Decoding test: Barcode test samples: 8. 1. Test Samples: 1D Symbologies Code 39 Resolution 0. 508 mm 0. 339 mm 0. 254 mm 0. 127 mm Symbology Code 39 Code 39 Code 39 Code 39 PCS 0. 9 0. 9 0. 9 0. 9 Size (mm) 29 x 25 19 x 15 14 x 10 11 x 10 Digits 2 2 2 4 JAN/UPC/EAN Resolution 0. 260 mm 0. 260 mm Symbology 13-digit JAN 8-digit JAN PCS 0. 9/0. 45 0. 9 Size (mm) 25 x 19 17. 5 x 15. 5 Digits 13 8 GS1 Databar (RSS) Resolution 0. 254 mm Symbology Standard PCS 0. 9 Size (mm) 24 x 8 Digits 16 13 Opticon OPI 2002 Specifications Manual 8. 2. Test Samples: 2D Symbologies PDF417 Resolution 0. 339 mm 0. 254 mm 0. 127 mm Error Correction Level-4 Level-4 Level-4 PCS 0. 9 0. 9 0. 9 Size (mm) 35 x 22 26 x 16. 5 13 x 8 Characters 17 17 17 QR Code: Model 2 Resolution 0. 339 mm 0. 254 mm 0. 212 mm 0. 169 mm Error Correction M M M M PCS 0. 9 0. 9 0. 9 0. 9 Size (mm) 10 x 10 7. 5 x 7. 5 6x6 5x5 Characters 44 44 44 44 Data Matrix Resolution 0. 339 mm 0. 254 mm 0. 212 mm 0. 169 mm Error Correction ECC200 ECC200 ECC200 ECC200 PCS 0. 9 0. 9 0. 9 0. 9 Size (mm) 8x8 6x6 5x5 4x4 Characters 40 40 40 40 Maxicode Resolution 0. 889 mm Error Correction Standard PCS 0. 9 Size (mm) 26 x 26 Characters 29 Aztec Code: Full range Resolution 0. 254 mm Error Correction 50% PCS 0. 9 Size (mm) 8x8 Characters 31 MicroPDF417 Resolution 0. 254 mm 0. 169 mm Error Correction Standard Standard PCS 0. 9 0. 9 Size (mm) 14 x 7 9 x 4. 5 Characters 22 22 14 Opticon OPI 2002 Specifications Manual Composite barcode: RSS Stacked CCB Resolution 0. 254 mm Error Correction Standard PCS 0. 9 Size (mm) 14 x 11 Characters 16+18 8. 3. Print Contrast Signal (PCS) 0. 45 or higher (over 70% of reflectivity of space and quiet zone). PCS= Reflectance of white barReflectance of black bar Reflectance of white bar Scanning performance may decline if dirt or scratches mar the optical window. Conditions Barcode Sample: OPTOELECTRONICS Test Sample MRD Distance Resolution 32% and higher (with over 70% reflectivity of space and quiet zone. ) 100 mm from the front edge of the scanner. Minimum Resolution Resolution 0. 127 mm 0. 127 mm 0. 169 mm 0. 212 mm Symbology Code 39 PDF417 Data Matrix & QRCode Data Matrix 15 Opticon OPI 2002 Specifications Manual 8. 5. [. . . ] EMC EN55022 EN55024 VCCI Class B: This is a Class B product, to be used in a domestic environment based on the Technical Requirement of the Voluntary Control Council for Interference from Information Technology Equipment (VCCI). If this is used near a radio or television receiver in a domestic environment, it may cause radio interference. Please install and use the equipment according to the instruction manual. FCC Part 15 Subpart B Class B: This device complies with part 15 of the FCC Rules. [. . . ]