User manual OPTICON OPI 2101

[. . . ] · Do not drop or put heavy items on this product/cable. · Do not pinch or forcibly bend the cable, especially at very low temperature. · Do not swing the device around by the cable. · Do not insert foreign substances into the device. [. . . ] · Please stop using this product if it starts producing heat or smoke. · Unplug this product when it is not in use. · Unplug this product when cleaning. Copyright © 2008, Opticon All rights reserved. Before Getting Started What's in the Box Confirm that you have the following items before getting started. Please be noted that the contents may differ depending on interface specifications. Please contact the nearest dealer if items are damaged or missing. No. 1 2 3 4 5 Item Scanner AC/DC Adapter(*1) Plug Connectors(*2) Wedge branch cable(*3) Quick Start Guide Product No. OPI-2101 SFP0602000P-PSE Function Imager Scanner AC/DC Adapter with Plug Connector For Europe, for the UK, for Australia and for the US and Japan. Connects the keyboard and Wedge straight cable to the host computer. Provides product information and instruction guide. OPI21019062-0-00 (*1)(*2)Not enclosed in a package of the OPI-2101-USB. (*3) Enclosed only for the package of the OPI-2101-Wedge. Overview OPI-2101 Basic Specifications Parameter Physical Size Features Weight Operation Scan Confirmation Section Keys Interfaces RS-232C USB Wedge ASIC SDRAM Flash ROM Scanning Light Source Section Wavelength Scanning Method Laser aiming spot Wavelength/Output Control Section Supported Symbologies (1D) Supported Symbologies (2D) Operating voltage Power Supply Current Section consumption (at 6. 0V) Durability Operating Temp. Operating Humidity Storage Humidity Specifications (H)175 x (W) 72 x (D) 95 mm Approx. 165g (excluding the cable) Buzzer and LED 1 key (Trigger key) 9600bps to 115. 2kbps Detailed View Full-Speed 12Mbps ( HID/VCP ) Hi-Power Bus-powered DOS-V Keyboard(Selectable of the connection/disconnection of keyboard) OEY-0402 CPU:ARM-1026EJ-S Core:160MHz 128 Mbits (1M x 4Banks x 32Bits) 16 Mbits (1M x 16Bits) Flash Memory 8 (for USB) to 10 InGaN White LEDs Peak Wavelength: 468nm/568nm SXGA CMOS area sensor (1280 x 1024 pixels) 1 Red Laser 650±10nm/1mW or less JAN-8/13, EAN-8/13, UPC-A/E, NW7(Codabar), Code 39, Code 93, Code 128 (EAN-128), IATA, MSI/Plessey, Industrial 2 of 5, Interleaved 2 of 5, RSS, S-Code, Korean Postal Authority Code, UK-Plessey, Matrix 2 of 5, Telepen, Tri-Optic, CodablockF(*) PDF417, MicroPDF417, QR Code, Micro QR Code, Data Matrix (ECC 0-140, 200), Maxi Code (modes 2 to 5), Aztec Code, EAN. UCC Composite bar code 4. 5 to 6. 6V Peak (when scanning or decoding): 600mA Average (when scanning or decoding): 340mA Stand-by: 120mA -20 to 50 deg. C 5 to 95 % (non-condensing) 5 to 95 % (non-condensing) No. Part Status LED Buzzer Hole Aiming Laser Receiving Lens Floodlighting Trigger Switch Function Turns blue when the OPI-2101 registers a successful read and red when it fails. Illuminates laser beam aiming at symbologies. Starts scanning/decoding barcodes. Ambient Light Fluorescent: up to 10, 000lx Immunity Sunlight: up to 100, 000lx Dust-and Drip Proof IP42 Static Electricity 15kV (no destruction) Dropped once from each of 5 angles onto Shock concrete floor from a height of 200cm with Endurance no defects found. (Total 5 times) In case of enabling Codablock F, be sure to disable Code128. Damaged Codablock F may be taken for Code 128. Read about configuration options (by Opticonfigure) on www. opticon. com (*) Interface The OPI-2101 supports RS-232C, USB, and Wedge interfaces. RS-232C Interface How to connect Connect the 9-pin D-Sub female connector to the serial port of the host computer. Insert the AC/DC adaptor plug into the DC jack of the interface cable. Start up the host computer. USB Interface USB-HID (Human Interface Device) and USB-VCP (Virtual Communication Port) are available. How to Install a USB Driver for USB-VCP To connect the OPI-2101 to a host using a dedicated USB cable, you must first install a dedicated USB driver on the host. If the driver CD is not included in the box, visit the Opticon website (www. opticon. com) section Service & Support | Download Software to download the available driver. Operating Environments OS : Windows 2000 / XP / VISTA Hard Disk Space : 10MB or more Memory : 64MB or more is recommended Communication Port : USB1. 1 or higher USB Driver for USB-HID The driver for USB-HID is inserted in the operating system and does not require further installation. · This interface does not require an AC/DC adaptor. [. . . ] C Storage Humidity 20 to 90% (non-condensing) 0. 05 1. 7 0. 05 Contact Please contact OPTICON or your local dealer. The Netherlands U. S. A. France Germany Italy Spain Opticon Sensors Europe B. V. tel: +31 (0)23-5692700 / email: sales@opticon. com Opticon Inc. tel: 800-636-0090 / email: opticon@opticonUSA. com Opticon S. A. S. [. . . ]