User manual OPTICON OPL 9712

[. . . ] Barcode Data Collector OPL 9712 The OPL 9712 data collector uses barcode laser scanning technology and uses Bluetooth for communication. Specifications Manual Opticon OPL 9712 Specifications Manual All information subject to change without notice. Document History Model Number: Edition: Date: OPL 9712 1A 2007-02-05 Specification Number: Original Spec Number: SS06071 SS06050 Copyright 2007 Opticon. All rights reserved. This manual may not, in whole or in part, be copied, photocopied, reproduced, translated or converted to any electronic or machine readable form without prior written consent of Opticon. Limited Warranty and Disclaimers PLEASE READ THIS MANUAL CAREFULLY BEFORE INSTALLING OR USING THE PRODUCT. Serial Number A serial number appears on all Opticon products. This official registration number is directly related to the device purchased. [. . . ] Note: , and respectively represent pitch, skew and tilt. Please see section 8 for how these values are defined. 8 Opticon OPL 9712 Specifications Manual 5. Controls Item Controls MPU Clock frequency External memory Flash ROM SRAM LCD DPI Display Backlight Functions Clock Real time clock Specifications 16-bit CISC CPU 14. 74 MHz 512 KB 512 KB Semi-transparent dot matrix LCD 112 x 64 dpi Installed Clock time, battery power, failure notification, function settings Counts year, month, date, hour, minute of the current time and corresponding to leap years Remarks Manufactured by Toshiba For BIOS/AP For WORK/DATA 6. Main Battery The main battery is a lithium-ion secondary battery. Nominal capacity: 600 mAh Battery life: rechargeable 300 times 6. 2. Battery Operating Time and Charging Time Parameter Backup battery Current consumption Usable time Specifications 3. 4 mAh lithium-ion battery 1 mA or less 150 mA or less 24 hours or more 50 hours or more At standby When operating Notes 1 scan/5s Without backlight, with Bluetooth communication 1 scan/5s Without backlight, no communication After main battery discharged Data hold time 72 hours or more Note: Battery life may be shorter than specified above when the quality of the battery pack is degraded. 9 Opticon OPL 9712 Specifications Manual 7. Laser Scan Specifications Parameter Light-emitting element Emission wavelength Light output Scanning method Scanning speed Scan angle Specification Red laser diode 650 ±10 (25° C) 1. 0 or less Bi-directional vibration mirror 100 ±20 Scan angle: 54 ±5 Read angle: 44 (Min) Unit -- nm mW -- scans/s ° ° Note: Refer to chapter 8, "Technical Specifications, " to read about scanning performance. 8. Technical Specifications The conditions for technical specifications are as follows, unless otherwise specified in each section. Conditions Ambient temperature and humidity: Ambient light: Background: Room temperature (5 to 35º C) Room humidity (45% to 85% RH) 500 to 900 lx Barcode = black Space = white Margin = white Background of label = black 8. 1. Print Contrast Signal (PCS) 0. 45 or higher (over 70% of reflectivity of space and quiet zone). PCS= Reflectance of white barReflectance of black bar Reflectance of white bar Scanning performance may decline if dirt or scratches mar the optical window. Minimum Resolution 0. 15 mm 10 Opticon OPL 9712 Specifications Manual 8. 3. Depth of Field The depth of field is measured from the edge of the data collector. The scanning range is within the circular arc centered on the scan origin. 365 240 145 75 60 40 35 CLR WX 9 YZ U 8TV Q 7P RS 3DEF 6M O N 44 52 2 AB C KL 5J Sh i f t M in mu read ing d is tance im Reso lu t ion 0 . 15 Reso lu t ion 0 . 25 Reso lu t ion 0 . 5 Reso lu t ion 1 . 0 Figure 2: Depth of field Symbology Code 39 Code 39 Code 39 Code 39 Resolution (mm) 1. 0 0. 5 0. 25 0. 15 Decode Depth (mm) 60­300 35­210 35­120 35­70 PCS 0. 9 0. 9 0. 9 0. 9 Conditions Barcode Sample: OPTOELECTRONICS Test Sample N/W ratio: Angle: Curvature: 1:2. 5 = 0°, = 15°, = 0° R= 11 4GH I 1 . *. . . 0- BS E NT Opticon OPL 9712 Specifications Manual Resolution 1. 0 mm 0. 5 mm 0. 25 mm 0. 15 mm Symbology Code 39 Code 39 Code 39 Code 39 PCS 0. 9 0. 9 0. 9 0. 9 Quiet Zone 25 mm 18 mm 10 mm 7 mm Digit 1 3 8 10 Note: dirt or scratches on the mask will degrade scanning performance. Always handle the data collector carefully. 8. 4. Pitch Angle = ±25° Figure 3: Pitch Conditions Barcode Sample: OPTOELECTRONICS Test Sample Distance: Label: 90 mm from the edge of the data collector Pitch, Skew Angle PCS = 0. 9, Resolution = 0. 25 mm, Symbology = 9-digit Code 39, Quiet Zone = 10 mm, N/W Ratio = 1:2. 5 Dead Zone, Tilt Angle PCS = 0. 9, Resolution = 0. 26 mm, Symbology = 13-digit JAN, Quiet Zone = 10 mm Curvature: R = , Skew Angle = +15° (for measuring Pitch Angle and Tilt Angle) Angle: 12 Opticon OPL 9712 Specifications Manual 8. 4. 2. Skew Angle and Dead Zone Skew angle: = ±50° (Excluding dead zone) Dead zone: = ±8° (There are some areas in which decoding fails due to specular reflection) (Depth of field: Within 90 mm from the minimum scannable distance). Figure 4: Skew and dead zone Conditions Barcode Sample: OPTOELECTRONICS Test Sample Distance: Label: 90 mm from the edge of the data collector Pitch, Skew Angle PCS = 0. 9, Resolution = 0. 25 mm, Symbology = 9-digit Code 39, Quiet Zone = 10 mm, N/W Ratio = 1:2. 5 Dead Zone, Tilt Angle PCS = 0. 9, Resolution = 0. 26 mm, Symbology = 13-digit JAN, Quiet Zone = 10 mm Curvature: R = , Skew Angle = +15° (for measuring Pitch Angle and Tilt Angle) Angle: 13 Opticon OPL 9712 Specifications Manual 8. 4. 3. Tilt Angle = ±20° =20 ° =20 ° Figure 5: Tilt angle Conditions Barcode Sample: OPTOELECTRONICS Test Sample Distance: Label: 90 mm from the edge of the data collector Pitch, Skew Angle PCS = 0. 9, Resolution = 0. 25 mm, Symbology = 9-digit Code 39, Quiet Zone = 10 mm, N/W Ratio = 1:2. 5 Dead Zone, Tilt Angle PCS = 0. 9, Resolution = 0. 26 mm, Symbology = 13-digit JAN, Quiet Zone = 10 mm Curvature: R = , Skew Angle = +15° (for measuring Pitch Angle and Tilt Angle) Angle: 14 Opticon OPL 9712 Specifications Manual 8. 5. Curvature With 8-digit JAN/UPC/EAN barcodes, decoding performance is guaranteed when R15 mm. With 13-digit JAN/UPC/EAN barcodes, decoding performance is guaranteed when R20 mm. Figure 6: Curvature Conditions Barcode Sample: OPTOELECTRONICS Test Sample PCS = 0. 9, Resolution = 0. 26 mm, Quiet Zone = 10 mm Distance: Angle: 90 mm from the edge of the data collector Skew Angle = +15° The scanning range will vary according to the depth of field. 15 Opticon OPL 9712 Specifications Manual 9. Wireless Interface Bluetooth® is a registered trademark owned by its proprietor and used by OPTOELECTRONICS Co. , Ltd. under license. Feature Version 1) Supported protocol stack 1) 2. 0 RF (Radio Frequency Protocol) BB (Base Band Protocol) LM (Link Manager Protocol) L2CAP (Logical Link Control and Adaptation Protocol) SDP (Service Discovery Protocol) RFCOMM (serial port emulation) DUN (Dial-up Network Profile) SPP (Serial Port Profile) 1 to 1 One data collector to one host system (Do not connect multiple data collectors to one host system. ) Master or Slave mode Authentication enabled: These settings can be configured using menu barcodes. [. . . ] Radio Law The data collector qualifies as radio equipment for low-power radio stations (2. 4 GHz band advanced data communication systems) as specified in the Radio Law 38-24-1. The data collector has obtained the Certification for Construction Design of Specified Radio Equipment. It does not have a radio station license in Japan. The following activities are prohibited under the Radio Law: Remodeling and disassembly Peeling off the certificate label 15. 7. [. . . ]