User manual OPTOMA GT5000

[. . . ] 50 1 English Usage Notice Safety Information The lightning flash with arrow head within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. Class B emissions limits This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. To ensure reliable operation of the projector and to protect from over heating, it is recommended to install the projector in a location that does not block ventilation. [. . . ] `` Native: This format displays the original image without any scaling. `` AUTO: Automatically selects the appropriate display format. 16:9 Screen 4:3 16:10 LBX Native 480i/p 576i/p 1080i/p 720p PC Scale to 1440 x1080 Scale to 1920x1080 Scale to 1920 x 1440, in order to get the central 1920 x 1080 image displayed on the screen. 1:1 mapping centered No scaling will be made; the resolution is dependent on which input source and is then displayed. ``If this format is selected, the screen type will automatically become 16:9 ``If source is 4:3, auto resize to 1440 x 1080 ``If source is 16:9 auto resize to 1920 x 1080 ``If source is 16:10 auto resize to 1920 x 1200 and cut to 1920 x x1080 area display Auto 45 English User Controls Zoom `` Press the `` Press the to reduce the size of an image. to magnify an image on the projection screen. Zoom Edge Mask Edge mask the image to remove video encoding noise on the edge of video source. `` Press the `` Press the to decrease the edge mask in image. Press the into the next menu as below and then press the or or or to select item. DLP - Link `` DLP-Link: Select “DLP-Link” to use optimized settings for DLP Link 3D Glasses. `` VESA 3D: Select “VESA 3D” to use optimized setting for VESA 3D Glasses. Invert Off On `` Press the “On” to invert left and right frame contents. `` Press the “Off” for default frame contents. Press into the sub menu and then press the or or or ►key to select your preferred language. ™™ Rear-Desktop and Rear-Ceiling are to be used with a translucent screen. Or Projection or or ►key to select the preferred pro- Exit `` Front-Projection This is the default selection. The image is projected straight on the screen. `` `` `` Rear-Desktop Front-Ceiling Rear-Ceiling When selected , the image will appear reversed. When selected, the image will turn upside down. When selected, the image will appear reversed in upside down position 51 English User Controls Menu Location Press the location. Or or or key to select the preferred menu Menu Location Exit Screen Type Press the ™™ *This screen type applies to WXGA only. Or to choose the screen type from16:10* or 16:9. [. . . ] (0/2 for backward compatible) SEND to emulate Remote 7E 30 30 31 34 30 20 31 30 0D Up 7E 30 30 31 34 30 20 31 31 0D Left 7E 30 30 31 34 30 20 31 32 0D Enter (for projection MENU) 7E 30 30 31 34 30 20 31 33 0D Right 7E 30 30 31 34 30 20 31 34 0D Down 7E 30 30 31 34 30 20 31 35 0D Keystone + 7E 30 30 31 34 30 20 31 36 0D Keystone – 7E 30 30 31 34 30 20 31 37 0D Volume – 7E 30 30 31 34 30 20 31 38 0D Volume + 7E 30 30 31 34 30 20 31 39 0D Brightness 7E 30 30 31 34 30 20 32 30 0D Menu 7E 30 30 31 34 30 20 32 31 0D Zoom 7E 30 30 31 34 30 20 32 38 0D Contrast 7E 30 30 31 34 30 20 34 37 0D Source HEX Code Function Projector Return Description INFOn n : 0/1/2/3/4/6/7/8/9 = Standby/Cooling/Out of Range/ Lamp fail/Fan Lock/Over Temperature/Lamp Hours Running Out/Cover Open SEND from projector automatically when Standby/Cooling/Out of Range/Lamp fail/Fan Lock/Over Temperature/ Lamp Hours Running Out/Cover Open 101 English Appendices READ from projector 232 ASCII Code ~XX121 1 HEX Code 7E 30 30 31 32 31 20 31 0D Function Input Source Commands Projector Return Description Oka a = 0 None a = 2 VGA-1 a = 3 VGA-2 a = 5 Video a = 7 HDMI1 a = 8 HDMI2 dddd: FW version a = 0 None a = 1 Presentation a = 2 Bright/ a = 3 Movie a = 4 sRGB a = 5 User a= 7 Blackboard a = 9 3D a = 12 DICOM SIM. n : 0/1 = Off/On n: 1/2/3/5/6/7 =4:3/16:9/16:10/LBX/ Native/Auto a=0 Standard a=1 Cool a=2 Cold n : 0/1/2/3 = Front-Desktop/ RearDesktop/ Front-Ceiling/ Rear-Ceiling a = Power Status a=0 Power Off a=1 Power On b = Lamp Hour (LED Hours) bbbbb Lamp Hour (LED Hours) c = Input Source cc=00 None cc=02 VGA1 cc=03 VGA2 cc=05 Video cc=07 HDMI1 cc=08 HDMI2 d = Firmware Version dddd Firmware Version e = Display mode ee=00 None ee=01 Presentation ee=02 Bright ee=03 Movie ee=04 sRGB ee=05 User ee=07 Blackboard ee=09 3D ee=12 DICOM SIM. ~XX151 1 ~XX108 1 ~XX108 2 ~XX87 1 ~XX87 3 7E 30 30 31 35 31 20 31 0D 7E 30 30 31 30 38 20 31 0D 7E 30 30 31 30 38 20 32 0D 7E 30 30 38 37 20 31 0D 7E 30 30 38 37 20 33 0D Model name Lamp Hours Cumulative Lamp Hours Network Status IP Address OKn OKbbbb OKbbbbb Okn n:1/2/3=XGA/WGA/1080p bbbb: LampHour bbbbb: (5 digits) Total Lamp Hours n=0/1 Disconnected/Connected ~XX122 1 ~XX123 1 7E 30 30 31 32 32 20 31 0D 7E 30 30 31 32 33 20 31 0D Sofware Version Display Mode OKdddd Oka ~XX124 1 ~XX125 1 ~XX126 1 7E 30 30 31 32 34 20 31 0D 7E 30 30 31 32 35 20 31 0D 7E 30 30 31 32 37 20 31 0D Power State Brightness Format OKn OKn OKn *16:9 or 16:10 depend on Screen Type setting ~XX128 1 7E 30 30 31 32 38 20 31 0D Color Temperature (HD90/HD91) Projection Mode Information Oka ~XX129 1 ~XX150 1 7E 30 30 31 32 39 20 31 0D 7E 30 30 31 35 30 20 31 1D OKn Okabbbbbccd dddee Okaaa_bbb_ccc_ddd English 102 Appendices ~XX351 0 ~XX352 1 ~XX353 1 ~XX354 1 ~XX355 1 ~XX356 1 ~XX357 1 ~XX358 1 7E 30 30 33 35 31 20 30 0D 7E 30 30 33 35 32 20 31 0D 7E 30 30 33 35 33 20 31 0D 7E 30 30 33 35 34 20 31 0D 7E 30 30 33 35 35 20 31 0D 7E 30 30 33 35 36 20 31 0D 7E 30 30 33 35 37 20 31 0D 7E 30 30 33 35 38 20 31 0D Fan1 speed(blower) System temperature Serial number Closed Captioning AV Mute Mute LAN FW version Current Lamp Watt Oka Oka a=0000~9999 a=000~999 Okaaaaaaaaaa a=serial number string aaaaaaa Oka Oka Oka Okeeeee Okaaaa a: 0/1/2 = off/cc1/cc2 a : 0/1 = Off/On a : 0/1 = Off/On eeeee = Software Version aaaa=0000~9999 103 English Appendices Ceiling Mount Installation If you wish to use a third party ceiling mount kit, please ensure the screws used to attach a mount to the projector meet the following specifications::  Screw type: M4*3  Maximum screw length: 11mm  Minimum screw length: 8mm  Please note that damage resulting from incorrect installation will void the warranty. If you buy a ceiling mount from another company, please be sure to use the correct screw size. [. . . ]