Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual OPTOMA ML750ST. We hope that this OPTOMA ML750ST user guide will be useful to you.
Lastmanuals help download the user guide OPTOMA ML750ST.
Detailed instructions for use are in the User's Guide.
[. . . ] How to set-up File Type for Multi-Media with USB. 35 How to set-up File Type for Multi-Media with MicroSD. How to set-up File Type for Multi-Media with Internal Memory. 46 Mirroring the Screen of the Portable Device. [. . . ] Frequency: Change the display data clock frequency to match the frequency of your computer’s graphics card. If you see a vertical flickering wave, use the Frequency control to minimize the bars. Note: The Frequency can be adjusted only in VGA mode. English 27
Phase: Synchronize the signal timing of the display with the graphic card. If the image appears to be unstable or flickers, use the Phase to correct it. Note: The Phase can be adjusted only in VGA mode. Display
The Display menu allows you to modify the display settings, such as keystone and position. display
Auto Keystone Keystone Projection On
Select
Exit
Enter
Auto Keystone: Select On to automatically adjust image distortion caused by tilting the projector. Note: The Auto Keystone function can be only used to adjust the image distortion vertically. Keystone: Adjust image distortion caused by tilting the projector (+/-40 degrees). Note: If you adjust the keystone degree manually then the Auto Keystone function will be automatically switched off. Projection: Select the projection mode, depending upon how the projector is mounted. Yy Auto Keystone: On No reverse Left/ Right reverse yy Auto Keystone: Off No reverse Left/ Right reverse Up/ Down reverse Up/ Down and Left/ Right reverse
28 English
Setup
The Setup menu allows you to choose the default OSD language, modify boot-up source, set sleep timer, and other options. setup
Language Boot-Up Source Direct Power On Sleep Timer Advanced Reset Ver. English Auto Off Auto
Select
Exit
Enter
Language: Set the language for the OSD. Note: If the Boot-Up Source is set to“Auto” then at each boot-up of the projector the input source is always chosen the same as in previous session. Direct Power On: Choose On to activate Direct Power mode. The projector will automatically power on when AC power is supplied, without pressing the Power button on the projector control panel or on the remote control. Sleep Timer: Set the countdown timer interval. The countdown timer will start, with or without a signal being sent to the projector. The projector will automatically power off when the countdown has finished. Options are: Auto, Off, 30 min, 1 hour, 3 hours, 8 hours, 12 hours. [. . . ] if the problem persists , contact Optoma. Yy If the projector fan fails, the projector will automatically shut down. Clear the projector mode by pressing and holding the Power button for 10 seconds. Please wait for about 5 minutes and try to power up again. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE OPTOMA ML750ST
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual OPTOMA ML750ST will begin.
