User manual ORANGE D10-30NG QUICK GUIDE

[. . . ] This symbol indicates important instructions accompanying the product. WARNING :  To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. CAUTION :  TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. • This apparatus shall always be connected to a AC outlet with a protective grounding connection. • To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the mains plug shall be readily operable. [. . . ] Refer to the user's manual of your router or modem for instructions. 8. Type the Wireless Audio with Dock's WPS PIN number into the appropriate field of the Wi-Fi setup page. 9. Press and hold the WPS/RESET button on the back panel of the Wireless Audio with Dock with a pen tip or similar item for more than 10 seconds in the or mode. The indicator blinks once in white, and then twice. Wait until the indicator blinks three times, and then release the button. 10. If the connection between the Wireless Audio with Dock and the AP is completed within 90 seconds, the indicator changes from red to white. • The Wireless Audio with Dock connection is complete. 6 ▪▪ The Wi-Fi Direct function is not supported by this product. Direct connection may succeed in some cases, but it is not supported function by this product. 19 BLUETOOTH You can connect the Wireless Audio with Dock to Bluetooth devices and enjoy music with high quality stereo sound, all without wires! What is Bluetooth? Bluetooth technology lets Bluetooth-compliant devices interconnect easily with each other using a short wireless connection. • A Bluetooth device may cause noise or malfunction, depending on usage, when: -- A part of your body is in contact with the receiving/transmitting system of the Bluetooth device or the Wireless Audio with Dock. -- It is subject to electrical variation from obstructions caused by a wall, corner, or by office partitioning. -- It is exposed to electrical interference from same frequency-band devices including medical equipment, microwave ovens, and wireless LANs. • Keep the Wireless Audio with Dock and the Bluetooth device close together when pairing. • The further the distance between the Wireless Audio with Dock and Bluetooth device, the worse the quality. Select <yes> on the TV screen, then the pairing with the Wireless Audio with Dock will be completed. • The indicator blinks, and stops blinking. • The Wireless Audio with Dock Bluetooth pairing is complete. <to cancel pairing to your tv> If you want to pair your Wireless Audio with Dock to a TV other than the connected TV, you should cancel the existing pairing in the Wireless Audio with Dock. It is possible to cancel the pairing in the way below. The LED will blink once when you press the wPS/reSet button on the rear panel of the unit for 1 second in . This unit will automatically pair to a TV once you cancel the existing pairing and the new TV is ready for connection. ▪ If the TV cannot be connected, please try to reconnect it after pressing the WPS/RESET button on the rear panel of the set in the Bluetooth mode. ▪ You should update TV software to the latest version to operate TV pairing (SoundShare) function. ▪ Check the instructions for updating and applicable models from the support page on website (http://www. samsung. com) or contact the call centre. 21 to connect the wireless Audio with Dock to a Bluetooth device Before you begin, confirm that your Bluetooth device supports the Bluetooth compliant stereo headset function. DOCK DOCK DOCK connect external device 1. Press the display. button on the top panel of the Wireless Audio with Dock repeatedly until the icon appears in the • Each time you press the button, the selection changes as follows : ; ; ; ; ; ; aUX (LeD Off) ~ The selected mode is displayed in white in the Function Display. Select the Bluetooth menu on your Bluetooth device. (Refer to the Bluetooth device's user manual for instructions. ) 3. Scan or search for All Devices or for Headsets. [. . . ] ▪ Depending on the manufacturer, the USB may not be supported. ▪ Disconnect the Wireless Audio with Dock from the Internet and any external devices before you upgrade ▪ You cannot charge other external devices through this USB port. ▪ Refer to the Upgrade Guide from the website. the software. 30 PUSH LAN WPS / RESET AUX IN ONLY FOR SERVICE troubleshooting Before requesting service, please check the following. EnG symptom the unit will not turn on. check • Is the power cord plugged into the outlet?• Has the Wireless Audio with Dock or the remote been exposed to static electricity? [. . . ]