User manual ORANGE SPV C550

[. . . ] 2 Smartphone User Manual Safeguard Congratulations on the purchase of your new Windows MobileTM Smartphone! Please read before operating your device. THE DEVICE IS NOT CHARGED WHEN YOU TAKE IT OUT OF THE BOX. DO NOT REMOVE THE BATTERY PACK WHEN THE DEVICE IS CHARGING. WHEN INSERTING YOUR SIM CARD, MAKE SURE THE DEVICE IS POWERED OFF, AND THAT THE SIM CARD SNAPS INTO THE SOCKET SECURELY. [. . . ] In this mode, other devices can detect your device, whether or not a bond has been created. However, in order to receive a beam from another device, you must accept it on your device. If you no longer want your device to be discoverable, select Off to turn off the radio; or On to leave the radio on but not allow detection by other devices. NOTE: Bluetooth must be set to Discoverable mode if you want to use it in conjunction with Modem Link. See the next section for more information. 5. Getting Connected Bonds A bond is a relationship that you create between your Smartphone and another Bluetooth device in order to exchange information more securely. Creating a bond involves entering the same personal identification number (PIN) on the two devices you want to bond. Once a bond is created, the devices recognize the bond and are able to exchange information without your entering a PIN again. Make sure that the two devices are within 10 meters of each other and that Bluetooth is in Discoverable mode on both devices. 2. In the Home screen, select Settings > Bluetooth > Bluetooth from the Start menu. Select Devices from the menu, and then New. Your device searches for other Bluetooth devices and displays them in the list. Select the device you want, then select Add. In the PIN field, enter a PIN of between 1 and 16 characters, and select Done. 112 Smartphone User Manual 6. If desired, enter the name of the other device in the Name field, and select Done. 5. Getting Connected To accept a bond: 1. Make sure that Bluetooth is turned on and in Discoverable mode. 2. When prompted to bond with the other device, select Yes. In the PIN field, enter a PIN of between 1 and 16 characters, and select Done. You must enter the same PIN that was entered on the device requesting the bond. Optionally, you can enter the name of the device requesting the bond in the Name field. You can now exchange information with the other device. To delete a bond: 1. [. . . ] The image appears dark on my screen when in Camera mode. Appendix Smartphone User Manual 199 ActiveSync problems Problem ActiveSync operation cannot be performed or connected. Soultion · Make sure the Mini-USB cable is connected securely. · Make sure you have installed the ActiveSync software found on the Companion CD that came with your phone. · Make sure the settings are correct in File > Connection Settings. . . in the ActiveSync window on your desktop computer. [. . . ]