User manual OREGON SCIENTIFIC BAA913HG-EN

[. . . ] DIGITAL WEATHER FORECASTER WITH IN-OUT THERMO-HYGROMETER MODEL : BAA913HG USER'S MANUAL INTRODUCTION Congratulations on your purchase of the BAA913HG Digital Weather Forecaster with In-Out Thermo-Hygrometer. The BAA913HG is an all-in-one weather forecasting device and clock. The BAA913HG, a weather forecasting device, has several weather related functions. A main feature is that it takes and records temperatures and humidities in more than one location. Using a wireless remote thermo-hygro sensor, it can simultaneously monitor temperatures and humidities in three remote locations. [. . . ] Use the UP(+) or DOWN (-) button to enter the hours. Holding down either the up or down position will increase or decrease the value rapidly. 5 913hg-e. p65 5 04/30/2002, 5:59 PM German GB GB HOW TO SET AND ACTIVATE THE ALARM To set the Alarm Press [AL / ] button to display the daily alarm time (the icon "AL" AL will be displayed) Press [AL / ] and hold for three seconds, the value for the hour AL will flash. Press UP(+) or DOWN(-) buttons to make changes to the alarm hour setting. Press [AL / ] and the minute will flash. Enter the value for AL the minute by using UP(+) or DOWN(-) buttons. AL The alarm is automatically activated. The ALARM ON icon [ ] is visible and the alarm will activate at the specified time. To deactivate the daily alarm function, press the DOWN(-) button when the alarm time is displayed. The ALARM ON icon will disappear and [ -:-- ] will be displated. To activate, press the UP (+) button to display the alarm time again. PRE-ALARM FUNCTION FOR CHANNEL 1 REMOTE SENSOR The alarm function also has a pre-alarm feature which can alert the user before their preset alarm time if weather conditions changes. This pre-alarm function applies to Channel 1 Remote Sensor only. To enable this function, first activate the alarm function. Then enter the Pre-Alarm mode by pressing the ALARM button twice. The "Pre-Al" icon will be displayed. Press and hold the ALARM button for 3 seconds to set the operating time interval for this pre-alarm function. Use the UP or DOWN button to select from the 4 time-intervals: 15, 30, 45 or 60 minutes. Press the ALARM button to confirm and exit. The pre-alarm function will be enabled automatically which is indicated by the appearance of the [ ] symbol. To disable this function, press the DOWN button in the Pre-Alarm mode. The [ ] symbol will disappear and "-:--" will appear to indicate disable of this function. The pre-alarm will operate during the selected time interval before the daily alarm time. [. . . ] Use the UP (+) or DOWN (-) button to select from ­100 to 2500 meters (whichever appropriate). Press [HISTORY] button to confirm and exit. 9 913hg-e. p65 9 04/30/2002, 6:00 PM GB GB HOW TO WALL MOUNT OR USE THE TABLE STAND (MAIN UNIT) The unit can be wall-mounted using its recessed screw holes or placed on a flat surface using the collapsible table stand. Gently pull the table stand from it's collapsed position. [. . . ]